MMD MTVSS Mtvss series â 3.2 x 2.5 ceramic smd vctcxo Datasheet

MTVSS Series – 3.2 X 2.5 Ceramic SMD VCTCXO
 Low Profile SMD Device
 Hermetically Sealed
 Tight Stability Over Temperature
 Excellent Phase Noise
Frequency Range
Frequency Stability vs Temperature*
14.400MHZ TO 32.768MHZ
(See Frequency Stability vs Temperature Table)
Operating Temperature Range
(See Frequency Stability vs Temperature Table)
Storage Temperature Range
Aging
Supply Voltage
Supply Current
Output Type
Output Level
Output Load
Control Voltage
Frequency Tunning Range
-40°C to +85°C
±1.0 per year
+3.0VDC
3.3VDC
2mA max
Clipped Sinewave
0.8 Vp-p min
10k Ohms//10pF
1.25V±1.0V
1.4V±1.0V
1.5V±1.0V
1.65V±1.0V
±8 ppm to ±15 ppm
100Hz
-115dBc/Hz
Phase Noise
1kHz
-135dBc/Hz
10kHz
-145dBc/Hz
* Inclusive of Temperature., Load and Voltage
+2.5VDC
+2.8VDC
Environmental & Mechanical Detail
Shock
Solderability
Solvent Resistance
MIL-STD-883, Method 2002, Condition B
MIL-STD-883, Method 2003
MIL-STD-883, Method 215
Vibration
MIL-STD-883, Method 2007, Condition A
Gross Leak Test
MIL-STD-883, Method 1014, Condition C
Fine Leak Test
MIL-STD-883, Method 1014, Condition A-2
+3.6VDC
1.8V±1.0V
Marking Detail
First Line = MXX.X (not to exceed 5 characters)
M
XX.X
= MMD
Device Frequency
= (four digits including decimal
point)
Second Line = SYWW (not to exceed 5 characters)
S
YYWW
= Internal Code
= Date Code (Year/Week)
MMD Monitor/Quartztek
30400 Esperanza, Rancho Santa Margarita, CA, 92688
Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com
[email protected]
Revision:
Revisions only with customer approval
08/04/11 A
Pg 1 of 2
Part Number Guide
MTVS
Frequency
S
3.2 x 2.5 Ceramic SMD
Output
S = Clipped Sinewave
Supply Voltage
25 = +2.5VDC
28 = +2.8VDC
30 = +3.0VDC
33 = +3.3VDC
36 = +3.6VDC
Frequency
Stability
10 = ±1.0 ppm
15 = ±1.5 ppm
20 = ±2.0 ppm
25 = ±2.5 ppm
30 = ±3.0 ppm
50 = ±5.0 ppm
Operating
Temperature
A = 0°C to +50°C
C = -20°C to +70°C
D = -30°C to +70°C
E = -30°C to +80°C
F = -40°C to +85°C
G = 0°C to +70°C
Pin 1 Connection
V = Voltage Control
Packaging
T = Tape and Reel
Please Consult with MMD Sales Department for any other Parameters or Options
Mechanical Details
3.40 [.134]
MAX
MXX.X
SYWW
0.90 [.035]
MAX
2.65 [.104]
2.24 [.088]
3
4
0.25 [.010]
0.70 [.028]
0.51 [.020]
2.70 [.106]
MAX
2
Dimension in Brackets are in Inches
External Bypass Capacitor is Recommended
0.83 [.033]
1
1.20 [.047]
PIN CONNECTIONS
PIN 1 VOLTAGE CONTROL
PIN 2 GND
PIN 3 OUTPUT
PIN 4 SUPPLY VOLTAGE
0.30 [.012]
0.60 [.024]
0.40 [.016]
GROUND PLANE UNDER OSCILLATOR
Suggested
Land Pattern
Tape & Reel Dimensions
PITCH
16.00
REEL DIA
Q1 Q2
Q1 Q2
Q3 Q4
Q3 Q4
PITCH
TAPE WIDTH
REEL DIA
COUNT
PIN 1 ORIENT.
4.00 [.157]
8.00 [.315]
180 [7.0]
1000
Q1
NOTES: UNLESS OTHERWISE SPECIFIED
1. Applicable Standards / Specifications
ANSI Y14.5M, Dimensions and Tolerances
EIA-481-B, 8 mm through 200mm Embossed Carrier Taping and 8 mm and 12 mm
Punched Carrier Taping of Surface Mount Components for Automatic Handling.
2. Dimensions are in millimeters [inch].
3. Tolerances are ±0.1 [.004] mm unless otherwise specified.
4. Do not scale drawing.
DIRECTION OF FEED
MMD Monitor/Quartztek
30400 Esperanza, Rancho Santa Margarita, CA, 92688
Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com
[email protected]
Revision:
Revisions only with customer approval
08/04/11 A
Pg 2 of 2
Similar pages