DYELEC GBJ2002A Single phase 20amp glass passivated bridge rectifier Datasheet

GBJ20005A THRU GBJ2010A
SINGLE PHASE 20.0 AMP GLASS PASSIVATED BRIDGE RECTIFIER
Features
GBJ
· Glass passivated die construction
.189(4.8)
.173(4.4)
1.193(30.3)
1.169(29.7)
· Low forward voltage drop
· High current capability
.215(5.2)
.196(4.8) .800(20.3)
· High surge current capability
+
· Plastic material-UL flammability 94V-0
~
.106(2.7)
.096(2.3)
Mechanical Data
.090(2.3)
.078(2.0)
· Case: Molded plastic, GBJ
· Terminals: Plated Leads Solderable per
.043(1.1)
.035(0.9)
.433(11)
.354(9.0)
·
·
·
·
.150(3.8)
.134(3.4)
MIL-STD-202, Method 208
Polarity: As Marked on Case
Mounting Position: Any
Marking: Type Number
Lead Free: For RoHS / Lead Free Version
~
.787(19.7) .441(11.2)
.425(10.8)
.165(4.2)
.150(3.8)
~
~
.110(2.8)
.094(2.4)
.023(0.6)
.303(7.7)
.287(7.3)
.303(7.7)
.287(7.3)
+
.706(18.0)
.626(16.0)
.184(3.4)
.122(3.1)
-
dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ ambient temperature unless otherwise specified.
Single Phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
TYPE NUMBER
SYMBOL
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
RMS Reverse Voltage
VRMS
Average Rectified Output Current (Note 1)@TC =90 ℃
IF(AV)
GBJ
GBJ
GBJ
GBJ
GBJ
GBJ
GBJ
20005A 2001A 2002A 2004A 2006A 2008A 2010A
UNITS
50
100
200
400
600
800
1000
V
35
70
140
280
420
560
700
V
VDC
20.0
A
Non-Repetitive Peak Forward Surge Current 8.3ms
Single half sine-wave superimposed on rated load
(JEDEC Method)
IFSM
220
A
I2t Rating for Fusing (t < 8.3ms)
I 2t
200.86
1.0
1.1
A2s
@IF=10A
@IF=20A
Forward Voltage per element
Peak Reverse Current
At Rated DC Blocking Voltage
VFM
@TA =25 ℃
@TA =125 ℃
V
IR
5.0
500
uA
CJ
65
pF
Between junction and ambient, Without heatsink
RθJA
22
Between junction and case, With heatsink
RθJC
1.5
Typical Junction Capacitance per leg
Operating and Storage Temperature Range
TJ,TSTG
℃/W
℃
-55to+150
2
Note:1. Mounted on glass epoxy PC board with 1.3mm solder pad.
version:02
1 of 3
www.dyelec.com
AVERAGE FORWARD RECTIFIED CURRENT (A)
GBJ20005A THRU GBJ2010A
20.0
15.0
10.0
5.0
0
150
100
50
200
I
(AV),
0
IF, INSTANTANEOUS FORWARD CURRENT (A)
Fig. 1 Output Current Derating Curve
240
210
180
150
120
90
TA = 25°C
Single Half Sine-Wave
Pulse Width = 8.3ms
(JEDEC Method)
0
10
1
0.3
0.03
0.4
TA= 25°C
Pulse Width = 300 µs
0.6
0.8
1.0
1.2
1.4
1.6
100
NUMBER OF CYCLES AT 60 Hz
Fig. 4 Typical Junction Capacitance
INSTANTANEOUS REVERSE CURRENT,
MICROAMPERES
IFSM, PEAK FORWARD SURGE CURRENT (A)
Fig. 3 Maximum Peak Forward Surge Current (per leg)
30
3
VF, INSTANTANEOUS FORWARD VOLTAGE (V)
TC , CASE TEMPERATURE( ° C)
60
Fig. 2 Typical Forward Characteristics (per leg)
30
10
1.0
T A=25°C
0.1
0.01
0
20
40
60
80
100
120
140
PERCENT OF RATED PEAK REVERSE VOLTAGE
FIG.5 TYPICAL REVERSE CHRACTERISTICS
INVSTANTANEOUS REVERSE CURRENT (µA)
100
Tj=150℃
10
1.0
Tj=25℃
0.1
0.01
0
20
40
60
80
100
PERCENT OF RATED PEAK INVERSE VOLTGE (V)
version:02
2 of 3
www.dyelec.com
GBJ20005A THRU GBJ2010A
Important Notice and Disclaimer
•Reproducing and modifying information of the document is prohibited without permission
from DIYI.
• DIYI reserves the right to make changes to this document and its products and
specifications at any time without notice. Customers should obtain and confirm the
latest product information and specifications before final design, purchase or use.
•DIYI disclaims any and all liability arising out of the application or use of
any product including damages incidentally and consequentially occurred.
•DIYI does not assume any and all implied warranties, including warranties of fitness for
particular purpose, non-infringement and merchantability.
Applications shown on the here in document are examples of standard use and
•
operation. Customers are responsible in comprehending the suitable use in particular
applications.
DIYI makes no representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
•The products shown herein are not designed and authorized for equipments requiring high
level of reliability or relating to human life and for any applications concerning life-saving
or life-sustaining, such as medical instruments, transportation equipment, aerospace
machinery et cetera. Customers using or selling these products for use in such applications
do so at their own risk and agree to fully indemnify DIYI for any damages resulting from such
improper use or sale.
•Since DIYI uses lot number as the tracking base, please provide the lot number for tracking
when complaining.
version:02
3 of 3
www.dyelec.com
Similar pages