Lyontek LY6564 8k x 8 bit high speed cmos sram Datasheet

®
LY6564
8K X 8 BIT HIGH SPEED CMOS SRAM
Rev. 1.1
REVISION HISTORY
Revision
Rev. 1.0
Rev. 1.1
Description
Initial Issue
Delete E-grade, revise Ordering Information in page 10
Lyontek Inc. reserves the rights to change the specifications and products without notice.
5F, No. 2, Industry E. Rd. IX, Science-Based Industrial Park, Hsinchu 300, Taiwan.
TEL: 886-3-6668838
FAX: 886-3-6668836
0
Issue Date
Aug.27.2010
Apr. 06. 2012
®
LY6564
8K X 8 BIT HIGH SPEED CMOS SRAM
Rev. 1.1
FEATURES
GENERAL DESCRIPTION
„ Fast access time : 20ns
„ Low power consumption:
Operating current : 30mA (TYP.)
Standby current : 2μA (TYP.)
„ Single 5V power supply
„ All inputs and outputs TTL compatible
„ Fully static operation
„ Tri-state output
„ Data retention voltage : 2.0V (MIN.)
„ Green package available
„ Package : 28-pin 300 mil SOJ
28-pin 8mm x 13.4mm STSOP
The LY6564 is a 65,536-bit high speed CMOS static
random access memory organized as 8,192 words
by 8 bits. It is fabricated using very high
performance, high reliability CMOS technology. Its
standby current is stable within the range of
operating temperature.
The LY6564 is well designed for high speed system
applications, and particularly well suited for battery
back-up nonvolatile memory application.
The LY6564 operates from a single power supply
of 5V and all inputs and outputs are fully TTL
compatible
PRODUCT FAMILY
Product
Family
LY6564(LL)
LY6564(LLI)
Operating
Temperature
0 ~ 70℃
-40 ~ 85℃
Vcc Range
Speed
4.5 ~ 5.5V
4.5 ~ 5.5V
20ns
20ns
FUNCTIONAL BLOCK DIAGRAM
PIN DESCRIPTION
Vcc
Vss
A0-A12
DECODER
DQ0-DQ7
I/O DATA
CIRCUIT
CE#
CE2
WE#
OE#
CONTROL
CIRCUIT
Power Dissipation
Standby(ISB1,TYP.) Operating(Icc,TYP.)
2µA
30mA
2µA
30mA
8Kx8
MEMORY ARRAY
SYMBOL
DESCRIPTION
A0 - A12
Address Inputs
DQ0 – DQ7
Data Inputs/Outputs
CE#, CE2
Chip Enable Inputs
WE#
Write Enable Input
OE#
Output Enable Input
VCC
Power Supply
VSS
Ground
NC
No Connection
COLUMN I/O
Lyontek Inc. reserves the rights to change the specifications and products without notice.
5F, No. 2, Industry E. Rd. IX, Science-Based Industrial Park, Hsinchu 300, Taiwan.
TEL: 886-3-6668838
FAX: 886-3-6668836
1
®
LY6564
8K X 8 BIT HIGH SPEED CMOS SRAM
Rev. 1.1
PIN CONFIGURATION
ABSOLUTE MAXIMUN RATINGS*
PARAMETER
Voltage on VCC relative to VSS
Voltage on any other pin relative to VSS
SYMBOL
VT1
VT2
Operating Temperature
TA
Storage Temperature
Power Dissipation
DC Output Current
TSTG
PD
IOUT
RATING
-0.5 to 6.5
-0.5 to VCC+0.5
0 to 70(C grade)
-40 to 85(I grade)
-65 to 150
1
50
UNIT
V
V
℃
℃
W
mA
*Stresses greater than those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress
rating only and functional operation of the device or any other conditions above those indicated in the operational sections of this
specification is not implied. Exposure to the absolute maximum rating conditions for extended period may affect device reliability.
TRUTH TABLE
MODE
Standby
Output Disable
Read
Write
Note:
CE#
H
X
L
L
L
CE2
X
L
H
H
H
OE#
X
X
H
L
X
WE#
X
X
H
H
L
I/O OPERATION
High-Z
High-Z
High-Z
DOUT
DIN
H = VIH, L = VIL, X = Don't care.
DC ELECTRICAL CHARACTERISTICS
Lyontek Inc. reserves the rights to change the specifications and products without notice.
5F, No. 2, Industry E. Rd. IX, Science-Based Industrial Park, Hsinchu 300, Taiwan.
TEL: 886-3-6668838
FAX: 886-3-6668836
2
SUPPLY CURRENT
ISB1
ISB1
ICC
ICC
ICC
®
LY6564
8K X 8 BIT HIGH SPEED CMOS SRAM
Rev. 1.1
SYMBOL
TEST CONDITION
PARAMETER
Supply Voltage
VCC
*1
Input High Voltage
VIH
*2
Input Low Voltage
VIL
VCC ≧ VIN ≧ VSS
Input Leakage Current
ILI
Output Leakage
VCC ≧ VOUT ≧ VSS,
ILO
Current
Output Disabled
Output High Voltage
VOH IOH = -1mA
Output Low Voltage
VOL IOL = 2mA
Average Operating
Power supply Current
Standby Power
Supply Current
ICC
ISB
ISB1
MIN.
4.5
2.4
- 0.5
-1
Cycle time = Min.
CE# = VIL and CE2 = VIH,
II/O = 0mA
Other pins at VIH or VIL
CE# = VIH or CE2 = VIL
Others at VIL or VIH
CE# ≧VCC-0.2V or CE2≦0.2V
Other pins at 0.2V or VCC-0.2V
TYP.
5.0
-
*4
MAX.
5.5
VCC+0.5
0.8
1
UNIT
V
V
V
µA
-1
-
1
µA
2.4
-
-
0.4
V
V
-
30
55
mA
-
1
5
mA
-
2
50
µA
Notes:
1. VIH(max) = VCC + 3.0V for pulse width less than 10ns.
2. VIL(min) = VSS - 3.0V for pulse width less than 10ns.
3. Over/Undershoot specifications are characterized, not 100% tested.
4. Typical values are included for reference only and are not guaranteed or tested.
Typical valued are measured at VCC = VCC(TYP.) and TA = 25℃
CAPACITANCE (TA = 25℃, f = 1.0MHz)
PARAMETER
Input Capacitance
Input/Output Capacitance
SYMBOL
CIN
CI/O
MIN.
-
MAX
6
8
Note : These parameters are guaranteed by device characterization, but not production tested.
AC TEST CONDITIONS
Input Pulse Levels
Input Rise and Fall Times
Input and Output Timing Reference Levels
Output Load
0.2V to VCC - 0.2V
3ns
1.5V
CL = 30pF + 1TTL, IOH/IOL = -4mA/8mA
Lyontek Inc. reserves the rights to change the specifications and products without notice.
5F, No. 2, Industry E. Rd. IX, Science-Based Industrial Park, Hsinchu 300, Taiwan.
TEL: 886-3-6668838
FAX: 886-3-6668836
3
UNIT
pF
pF
®
LY6564
8K X 8 BIT HIGH SPEED CMOS SRAM
Rev. 1.1
AC ELECTRICAL CHARACTERISTICS
(1) READ CYCLE
PARAMETER
Read Cycle Time
Address Access Time
Chip Enable Access Time
Output Enable Access Time
Chip Enable to Output in Low-Z
Output Enable to Output in Low-Z
Chip Disable to Output in High-Z
Output Disable to Output in High-Z
Output Hold from Address Change
(2) WRITE CYCLE
PARAMETER
Write Cycle Time
Address Valid to End of Write
Chip Enable to End of Write
Address Set-up Time
Write Pulse Width
Write Recovery Time
Data to Write Time Overlap
Data Hold from End of Write Time
Output Active from End of Write
Write to Output in High-Z
SYM.
tRC
tAA
tACE
tOE
tCLZ*
tOLZ*
tCHZ*
tOHZ*
tOH
SYM.
tWC
tAW
tCW
tAS
tWP
tWR
tDW
tDH
tOW*
tWHZ*
LY6564-20
MIN.
MAX.
20
20
20
8
4
0
8
8
3
-
UNIT
LY6564-20
MIN.
MAX.
20
16
16
0
11
0
9
0
5
9
UNIT
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
*These parameters are guaranteed by device characterization, but not production tested.
Lyontek Inc. reserves the rights to change the specifications and products without notice.
5F, No. 2, Industry E. Rd. IX, Science-Based Industrial Park, Hsinchu 300, Taiwan.
TEL: 886-3-6668838
FAX: 886-3-6668836
4
®
LY6564
8K X 8 BIT HIGH SPEED CMOS SRAM
Rev. 1.1
TIMING WAVEFORMS
READ CYCLE 1 (Address Controlled) (1,2)
tRC
Address
tAA
Dout
tOH
Previous Data Valid
Data Valid
READ CYCLE 2 (CE# and CE2 and OE# Controlled) (1,3,4,5)
tRC
Address
tAA
CE#
tACE
CE2
OE#
tOE
tOH
tOHZ
tCHZ
tOLZ
tCLZ
Dout
High-Z
Data Valid
High-Z
Notes :
1.WE# is high for read cycle.
2.Device is continuously selected OE# = low, CE# = low., CE2 = high.
3.Address must be valid prior to or coincident with CE# = low, CE2 = high; otherwise tAA is the limiting parameter.
4.tCLZ, tOLZ, tCHZ and tOHZ are specified with CL = 5pF. Transition is measured ±500mV from steady state.
5.At any given temperature and voltage condition, tCHZ is less than tCLZ , tOHZ is less than tOLZ.
Lyontek Inc. reserves the rights to change the specifications and products without notice.
5F, No. 2, Industry E. Rd. IX, Science-Based Industrial Park, Hsinchu 300, Taiwan.
TEL: 886-3-6668838
FAX: 886-3-6668836
5
®
LY6564
8K X 8 BIT HIGH SPEED CMOS SRAM
Rev. 1.1
WRITE CYCLE 1 (WE# Controlled) (1,2,3,5,6)
tWC
Address
tAW
CE#
tCW
CE2
tAS
tWP
tWR
WE#
tWHZ
Dout
TOW
High-Z
(4)
tDW
Din
(4)
tDH
Data Valid
WRITE CYCLE 2 (CE# and CE2 Controlled) (1,2,5,6)
tWC
Address
tAW
CE#
tAS
tWR
tCW
CE2
tWP
WE#
tWHZ
Dout
High-Z
(4)
tDW
Din
tDH
Data Valid
Notes :
1.WE#, CE# must be high or CE2 must be low during all address transitions.
2.A write occurs during the overlap of a low CE#, high CE2, low WE#.
3.During a WE#controlled write cycle with OE# low, tWP must be greater than tWHZ + tDW to allow the drivers to turn off and data to be
placed on the bus.
4.During this period, I/O pins are in the output state, and input signals must not be applied.
5.If the CE#low transition and CE2 high transition occurs simultaneously with or after WE# low transition, the outputs remain in a high
impedance state.
6.tOW and tWHZ are specified with CL = 5pF. Transition is measured ±500mV from steady state.
Lyontek Inc. reserves the rights to change the specifications and products without notice.
5F, No. 2, Industry E. Rd. IX, Science-Based Industrial Park, Hsinchu 300, Taiwan.
TEL: 886-3-6668838
FAX: 886-3-6668836
6
®
LY6564
8K X 8 BIT HIGH SPEED CMOS SRAM
Rev. 1.1
DATA RETENTION CHARACTERISTICS
PARAMETER
SYMBOL
VCC for Data Retention
VDR
Data Retention Current
IDR
Chip Disable to Data
Retention Time
Recovery Time
tRC* = Read Cycle Time
tCDR
TEST CONDITION
CE# ≧ VCC - 0.2V
or CE2 ≦ 0.2V
VCC = 2.0V
CE# ≧ VCC - 0.2V or CE2 ≦ 0.2V
Others at 0.2V or VCC-0.2V
See Data Retention
Waveforms (below)
tR
MIN.
TYP.
MAX.
UNIT
2.0
-
5.5
V
-
0.5
30
µA
0
-
-
ns
tRC*
-
-
ns
DATA RETENTION WAVEFORM
Low Vcc Data Retention Waveform (1) (CE# controlled)
VDR ≧ 2.0V
Vcc
Vcc(min.)
Vcc(min.)
tCDR
CE#
VIH
tR
CE# ≧ Vcc-0.2V
VIH
Low Vcc Data Retention Waveform (2) (CE2 controlled)
VDR ≧ 2.0V
Vcc
Vcc(min.)
Vcc(min.)
tCDR
CE2
tR
CE2 ≦ 0.2V
VIL
VIL
Lyontek Inc. reserves the rights to change the specifications and products without notice.
5F, No. 2, Industry E. Rd. IX, Science-Based Industrial Park, Hsinchu 300, Taiwan.
TEL: 886-3-6668838
FAX: 886-3-6668836
7
®
LY6564
8K X 8 BIT HIGH SPEED CMOS SRAM
Rev. 1.1
PACKAGE OUTLINE DIMENSION
28-pin 300 mil SOJ Package Outline
Dimension
UNIT
SYM.
A
A1
A2
B
B1
c
D
E
E1
e
L
S
Y
INCH(REF)
MM(BASE)
0.140(MAX)
0.025(MIN)
0.100±0.015
0.018±0.004
0.028±0.004
0.010±0.004
0.710±0.020
0.337±0.010
0.300±0.005
0.050±0.006
0.087±0.010
0.045(MAX)
0.004(MAX)
3.556(MAX)
0.635(MIN)
2.540±0.381
0.457±0.102
0.711±0.102
0.254±0.102
18.03±0.508
8.560±0.254
7.620±0.127
1.270±0.152
2.210±0.254
1.143(MAX)
0.102(MAX)
Note : 1.S/E/D dimension is not including mold flash.
2.The end flash in package lengthwise is not more than 10 mils each side.
Lyontek Inc. reserves the rights to change the specifications and products without notice.
5F, No. 2, Industry E. Rd. IX, Science-Based Industrial Park, Hsinchu 300, Taiwan.
TEL: 886-3-6668838
FAX: 886-3-6668836
8
®
LY6564
8K X 8 BIT HIGH SPEED CMOS SRAM
Rev. 1.1
28 pin 8x13.4mm STSOP Package Outline Dimension
SYMBOLS
A
A1
A2
b
c
HD
D
E
e
L
L1
Y
Θ
DIMENSIONS IN MILLIMETERS
MIN
NOM
MAX
1.00
1.10
1.20
0.05
0.15
0.91
1.00
1.05
0.17
0.22
0.27
0.07
0.15
0.23
13.20
13.40
13.60
11.60
11.80
12.00
7.80
8.00
8.20
0.55
0.30
0.50
0.70
0.675
0.00
0.076
0°
3°
5°
DIMENSIONS IN INCHES
MIN
NOM
MAX
0.040
0.043
0.047
0.002
0.006
0.036
0.039
0.041
0.007
0.009
0.011
0.003
0.006
0.009
0.520
0.528
0.535
0.457
0.465
0.472
0.307
0.315
0.323
0.0216
0.012
0.020
0.028
0.027
0.000
0.003
0°
3°
5°
Lyontek Inc. reserves the rights to change the specifications and products without notice.
5F, No. 2, Industry E. Rd. IX, Science-Based Industrial Park, Hsinchu 300, Taiwan.
TEL: 886-3-6668838
FAX: 886-3-6668836
9
®
LY6564
Rev. 1.1
8K X 8 BIT HIGH SPEED CMOS SRAM
ORDERING INFORMATION
Lyontek Inc. reserves the rights to change the specifications and products without notice.
5F, No. 2, Industry E. Rd. IX, Science-Based Industrial Park, Hsinchu 300, Taiwan.
TEL: 886-3-6668838
FAX: 886-3-6668836
10
®
LY6564
Rev. 1.1
8K X 8 BIT HIGH SPEED CMOS SRAM
THIS PAGE IS LEFT BLANK INTENTIONALLY.
Lyontek Inc. reserves the rights to change the specifications and products without notice.
5F, No. 2, Industry E. Rd. IX, Science-Based Industrial Park, Hsinchu 300, Taiwan.
TEL: 886-3-6668838
FAX: 886-3-6668836
11
Similar pages