Extech MS6100 2-channel digital oscilloscope Datasheet

PRODUCT DATASHEET
MS6000 Series 2-Channel
Digital Oscilloscopes
A
B
C
D
E
F
5.6" (142mm) graphical color
LCD for viewing multiple
waveforms plus built-in
digital multimeter display
and analog bargraph.
DISPLAYS:
A. Oscilloscope
B. Dual Channel
C. Multimeter
D. Pass/Fail Test
E. Reference
F. X/Y Format
Features
•
Three models to choose from:
•
Waveform Recorder to capture/replay input
- Model MS6060 — 60MHz bandwidth
waveforms from CH1 and CH2 with a maximum
- Model MS6100 — 100MHz bandwidth
record length of 1000 frames
- Model MS6200 — 200MHz bandwidth
•
•
•
Pass-Fail function compares a stored waveform
to an unknown input
One-touch automatic setup optimizes the position,
range, timebase, and triggering to assure a stable
•
Average Mode for smoothing waveforms
display of virtually any waveform
•
Square Wave Output (2V, 1kHz) for probe adjustment
Easy-to-use pop-up menu with built-in
•
Built-in 6,000 count True RMS MultiMeter with
multi-language system
analog bargraph
•
23 Automatic Measurements
•
Waveform Math: Add, Subtract, Multiply, and Divide
test leads, 7.4V Li-Ion battery, universal AC charger,
•
Store and recall up to 1000 waveform screens and
and carrying case
•
Complete with two 1X/10X oscilloscope probes,
setups using the installed 2G microSD card
•
Automatic cursor tracking measurements
•
XY Mode
•
Built-in FFT function converts a time-domain signal
into its frequency components to measure harmonic
content and distortion in systems
Specifications subject to change without notice. Copyright © 2012 Extech Instruments Corporation. All rights reserved including the right of reproduction in whole or in part in any form.
Rev. 6/22/12
www.extech.com
Specifications
MS6060
MS6100
Bandwidth
60MHz
100MHz
200MHz
Sample rate per channel
500MS/s
500MS/s
500MS/s
Risetime
5.8ns
3.5ns
1.8ns
Timebase Range
4ns/div to 40s/div
4ns/div to 40s/div
2ns/div to 40s/div
MS6200
Common Features/Functions
Oscilloscope Functions
Record Length
1M points per channel
Display Size
5.6" (142mm) color LCD; 640 x 480 pixels
Channels
2
Vertical Sensitivity
2mV/div to 5V/div
Vertical Resolution
8 bits
Glitch Capture
Yes
Sample Mode
Normal, Average, Peak Detect
Trigger Modes
Edge, Pulse, Alt, Video, Slope
Trigger Source
CH1, CH2
Trigger Coupling
AC, DC, LF, HF, Noise Reduction
Input impedance
1MΩ/20pF
Max Input Voltage
300V (peak)
Cursor Measurement
Voltage and time; Delta (CH1-CH2)
True RMS MultiMeter Functions
AC Voltage
60mV, 600mV, 6V, 60V, 600V
DC Voltage
60mV, 600mV, 6V, 60V, 600V, 800V
AC/DC Current
60mA, 600mA, 10A
Resistance
600Ω, 6kΩ, 60kΩ, 600kΩ, 6MΩ, 60MΩ
Capacitance
5nF to 400μF
Diode and Continuity
Yes
Power Supply
3 hours Li-ion rechargeable battery; AC Charger
Dimensions/Weight
9.6 x 6.4 x 2" (245 x 163 x 52mm) / 2.6lbs (1.2kg)
Ordering
MS6060 ............. 60MHz Dual Channel Digital Oscilloscope
MS6100 ............. 100MHz Dual Channel Digital Oscilloscope
MS6200 ............. 200MHz Dual Channel Digital Oscilloscope
BATT-74V ........... 7.4V Li-Ion Replacement Battery
TL620................. 1X/10X 200MHz Oscilloscope Probe
TL625................. High Voltage Oscilloscope Probe 100MHz, 2000V
Specifications subject to change without notice. Copyright © 2011 Extech Instruments Corporation. All rights reserved including the right of reproduction in whole or in part in any form.
www.extech.com
Similar pages