CREE MTGEZW-00-0000-0B00H030F Xlamp easywhite led Datasheet

CLD-DS36 Rev 9D
Product family data sheet
Cree® XLamp® MT-G EasyWhite® LEDs
Product Description
FEATURES
Table of contents
The XLamp® MT-G EasyWhite® LED
•
Cree EasyWhite color temperatures
from 2700 K to 5000 K CCT
Characteristics........................................ 2
•
Wide range of operating power - up
to 25 W
maximizes lumen density, eliminates
chromaticity
binning
and
enables
luminaire and bulb manufacturers to
Codes and Bins - 6 V............................... 3
Flux Characteristics, EasyWhite® Order
•
85 °C binning and characterization
•
Two voltage options: 6 V, 36 V
•
Low effective thermal resistance:
1.5 °C/W
•
High lumen density
94% smaller than the total area of the
•
Wide viewing angle: 120°
Relative Luminous Flux vs. Current........ 9
corresponding ANSI C78.377 color region.
•
80-minimum CRI at 2700 K and
3000 K CCT
Typical Spatial Distribution................... 10
The XLamp MT-G EasyWhite LED is the
•
85- and 90-minimum CRI available in
2700 K and 3000 K CCT
Performance Groups – Chromaticity... 11
•
Electrically neutral thermal path
required from a single, small point source.
•
RoHS and REACh compliant
Bin and Order Code Formats................ 12
Example
•
UL recognized component
(E349212)
Reflow Soldering Characteristics......... 13
deliver consistent color and high‑efficacy
light output in a new, compact, multi‑die
package. XLamp MT-G EasyWhite LEDs
can reduce LED-to-LED color variation
to within a 2‑step MacAdam ellipse,
perfect choice for lighting applications
where high luminous flux output is
applications
include:
LED
retrofit bulbs, commercial/retail display
®
illumination applications.
Codes and Bins - 36 V............................. 5
Relative Spectral Power Distribution..... 7
Relative Luminous Flux vs. Junction
Temperature............................................ 7
Electrical Characteristics........................ 8
Performance Groups – Brightness...... 10
Cree EasyWhite® Color Temperatures
Plotted on the 1931 CIE Curve............. 12
Notes..................................................... 14
Mechanical Dimensions....................... 16
spotlights, and other indoor general
www.cree.com/Xlamp
Flux Characteristics, EasyWhite® Order
Applications
Tape and Reel........................................ 17
•
MR, PAR and other directional retrofit
bulbs
Packaging.............................................. 18
•
Commercial/residential directional
lighting
•
General illumination
Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and
EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
XLamp ® MT-G EasyWhite ® LED
Characteristics
Characteristics
Viewing angle (FWHM)
ESD withstand voltage (HBM per Mil-Std-883D)
Effective thermal resistance, junction to solder point
Unit
degrees
Minimum
Typical
120
V
°C/W
Maximum
8000
1.5
LED junction temperature
°C
DC forward current (6 V)
mA
1100
4000
DC forward current (36 V)
mA
185
700
Forward voltage (6 V, 1100 mA, 85 °C)
V
5.6
6.7
Forward voltage (36 V, 185 mA, 85 °C)
V
33.5
40.2
Temperature coefficient of voltage (6 V)
mV/°C
-4.5
Temperature coefficient of voltage (36 V)
mV/°C
-27
Reverse voltage (6 V)
Reverse current (6V, 36 V)
150
V
-5
mA
0.1
Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
2
XLamp ® MT-G EasyWhite ® LED
Flux Characteristics, EasyWhite® Order Codes and Bins - 6 V (IF = 1100 mA, Tj = 85 °C)
The following tables provide order codes for 6-volt XLamp MT-G EasyWhite LEDs. For a complete description of the order code
nomenclature, please reference page 12 of this document.
Color
CCT
Range
5000 K
4000 K
Standard
CRI
3500 K
3000 K
2700 K
3000 K
85 CRI
Minimum
2700 K
Minimum Luminous Flux
@ 1100 mA
2-Step
Chromaticity
Region
4-Step
Group
Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
H0
560
642
J0
600
688
K0
650
745
MTGEZW-00-0000-0B00K050H
MTGEZW-00-0000-0B00K050F
F0
480
550
MTGEZW-00-0000-0B00F040H
MTGEZW-00-0000-0B00F040F
G0
520
596
H0
560
642
J0
600
688
MTGEZW-00-0000-0B00J040H
MTGEZW-00-0000-0B00J040F
E0
440
504
MTGEZW-00-0000-0B00E035H
MTGEZW-00-0000-0B00E035F
F0
480
550
Order Code
Chromaticity
Region
MTGEZW-00-0000-0B00H050H
50H
40H
35H
MTGEZW-00-0000-0B00J050H
MTGEZW-00-0000-0B00G040H
MTGEZW-00-0000-0B00H040H
MTGEZW-00-0000-0B00F035H
MTGEZW-00-0000-0B00H050F
50F
40F
35F
MTGEZW-00-0000-0B00J050F
MTGEZW-00-0000-0B00G040F
MTGEZW-00-0000-0B00H040F
MTGEZW-00-0000-0B00F035F
G0
520
596
H0
560
642
MTGEZW-00-0000-0B00H035H
MTGEZW-00-0000-0B00H035F
E0
440
504
MTGEZW-00-0000-0B00E030H
MTGEZW-00-0000-0B00E030F
F0
480
550
G0
520
596
H0
560
642
MTGEZW-00-0000-0B00H030H
MTGEZW-00-0000-0B00H030F
D0
400
458
MTGEZW-00-0000-0B00D027H
MTGEZW-00-0000-0B00D027F
E0
440
504
F0
480
550
G0
520
596
MTGEZW-00-0000-0B00G027H
MTGEZW-00-0000-0B00G027F
D0
400
458
MTGEZW-00-0000-0B0PD030H
MTGEZW-00-0000-0B0PD030F
E0
440
504
F0
480
550
D0
400
458
E0
440
504
30H
27H
30H
MTGEZW-00-0000-0B00G035H
Order Code
MTGEZW-00-0000-0B00F030H
MTGEZW-00-0000-0B00G030H
MTGEZW-00-0000-0B00E027H
MTGEZW-00-0000-0B00F027H
MTGEZW-00-0000-0B0PE030H
30F
27F
30F
MTGEZW-00-0000-0B0PF030H
27H
MTGEZW-00-0000-0B0PD027H
MTGEZW-00-0000-0B0PE027H
MTGEZW-00-0000-0B00G035F
MTGEZW-00-0000-0B00F030F
MTGEZW-00-0000-0B00G030F
MTGEZW-00-0000-0B00E027F
MTGEZW-00-0000-0B00F027F
MTGEZW-00-0000-0B0PE030F
MTGEZW-00-0000-0B0PF030F
27F
MTGEZW-00-0000-0B0PD027F
MTGEZW-00-0000-0B0PE027F
Notes:
•
•
•
•
•
•
•
*
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 14).
Minimum CRI for Standard color temperatures 27F, 27H, 30F, 30H is 80.
Minimum CRI for Standard color temperatures 35F, 35H, 40F, 40H is 77.
Minimum CRI for Standard color temperature 50F, 50H is 75.
Typical CRI for Standard color temperatures 35F, 35H, 40F, 40H is 80.
Minimum CRI for 85 CRI Minimum is 85.
Minimum CRI for 90 CRI Minimum is 90.
Flux values @ 25 °C are calculated and for reference only.
Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
3
XLamp ® MT-G EasyWhite ® LED
Flux Characteristics, EasyWhite® Order Codes and Bins - 6 V (IF = 1100 mA, Tj = 85 °C) - Continued
Color
CCT
Range
3000 K
90 CRI
Minimum
2700 K
Minimum Luminous Flux
@ 1100 mA
2-Step
Chromaticity
Region
4-Step
Group
Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
C0
370
424
D0
400
458
E0
440
504
MTGEZW-00-0000-0B0UE030H
MTGEZW-00-0000-0B0UE030F
B0
340
390
MTGEZW-00-0000-0B0UB027H
MTGEZW-00-0000-0B0UB027F
C0
370
424
D0
400
458
Order Code
Chromaticity
Region
MTGEZW-00-0000-0B0UC030H
30H
27H
MTGEZW-00-0000-0B0UD030H
MTGEZW-00-0000-0B0UC027H
MTGEZW-00-0000-0B0UD027H
Order Code
MTGEZW-00-0000-0B0UC030F
30F
27F
MTGEZW-00-0000-0B0UD030F
MTGEZW-00-0000-0B0UC027F
MTGEZW-00-0000-0B0UD027F
Notes:
•
•
•
•
•
•
•
*
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 14).
Minimum CRI for Standard color temperatures 27F, 27H, 30F, 30H is 80.
Minimum CRI for Standard color temperatures 35F, 35H, 40F, 40H is 77.
Minimum CRI for Standard color temperature 50F, 50H is 75.
Typical CRI for Standard color temperatures 35F, 35H, 40F, 40H is 80.
Minimum CRI for 85 CRI Minimum is 85.
Minimum CRI for 90 CRI Minimum is 90.
Flux values @ 25 °C are calculated and for reference only.
Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
4
XLamp ® MT-G EasyWhite ® LED
Flux Characteristics, EasyWhite® Order Codes and Bins - 36 V (IF = 185 mA, Tj = 85 °C)
The following table provide order codes for 36-volt XLamp MT-G EasyWhite LEDs. For a complete description of the order code
nomenclature, please reference page 12 of this document.
Color
CCT
Range
5000 K
4000 K
Standard
CRI
3500 K
3000 K
2700 K
3000 K
85 CRI
Minimum
2700 K
Minimum Luminous Flux
@ 185 mA
2-Step
Chromaticity
Region
4-Step
Group
Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
H0
560
642
J0
600
688
K0
650
745
MTGEZW-00-0000-0N00K050H
MTGEZW-00-0000-0N00K050F
F0
480
550
MTGEZW-00-0000-0N00F040H
MTGEZW-00-0000-0N00F040F
G0
520
596
H0
560
642
J0
600
688
MTGEZW-00-0000-0N00J040H
MTGEZW-00-0000-0N00J040F
E0
440
504
MTGEZW-00-0000-0N00E035H
MTGEZW-00-0000-0N00E035F
F0
480
550
Order Code
Chromaticity
Region
MTGEZW-00-0000-0N00H050H
50H
40H
35H
MTGEZW-00-0000-0N00J050H
MTGEZW-00-0000-0N00G040H
MTGEZW-00-0000-0N00H040H
MTGEZW-00-0000-0N00F035H
MTGEZW-00-0000-0N00H050F
50F
40F
35F
MTGEZW-00-0000-0N00J050F
MTGEZW-00-0000-0N00G040F
MTGEZW-00-0000-0N00H040F
MTGEZW-00-0000-0N00F035F
G0
520
596
H0
560
642
MTGEZW-00-0000-0N00H035H
MTGEZW-00-0000-0N00H035F
E0
440
504
MTGEZW-00-0000-0N00E030H
MTGEZW-00-0000-0N00E030F
F0
480
550
G0
520
596
H0
560
642
MTGEZW-00-0000-0N00H030H
MTGEZW-00-0000-0N00H030F
D0
400
458
MTGEZW-00-0000-0N00D027H
MTGEZW-00-0000-0N00D027F
E0
440
504
F0
480
550
G0
520
596
MTGEZW-00-0000-0N00G027H
MTGEZW-00-0000-0N00G027F
D0
400
458
MTGEZW-00-0000-0B0PD030H
MTGEZW-00-0000-0B0PD030F
E0
440
504
F0
480
550
D0
400
458
E0
440
504
30H
27H
30H
MTGEZW-00-0000-0N00G035H
Order Code
MTGEZW-00-0000-0N00F030H
MTGEZW-00-0000-0N00G030H
MTGEZW-00-0000-0N00E027H
MTGEZW-00-0000-0N00F027H
MTGEZW-00-0000-0B0PE030H
30F
27F
30F
MTGEZW-00-0000-0B0PF030H
27H
MTGEZW-00-0000-0B0PD027H
MTGEZW-00-0000-0B0PE027H
MTGEZW-00-0000-0N00G035F
MTGEZW-00-0000-0N00F030F
MTGEZW-00-0000-0N00G030F
MTGEZW-00-0000-0N00E027F
MTGEZW-00-0000-0N00F027F
MTGEZW-00-0000-0B0PE030F
MTGEZW-00-0000-0B0PF030F
27F
MTGEZW-00-0000-0B0PD027F
MTGEZW-00-0000-0B0PE027F
Notes:
•
•
•
•
•
•
•
*
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 14).
Minimum CRI for Standard color temperatures 27F, 27H, 30F, 30H is 80.
Minimum CRI for Standard color temperatures 35F, 35H, 40F, 40H is 77.
Minimum CRI for Standard color temperature 50F, 50H is 75.
Typical CRI for Standard color temperatures 35F, 35H, 40F, 40H is 80.
Minimum CRI for 85 CRI Minimum is 85.
Minimum CRI for 90 CRI Minimum is 90.
Flux values @ 25 °C are calculated and for reference only.
Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
5
XLamp ® MT-G EasyWhite ® LED
Flux Characteristics, EasyWhite® Order Codes and Bins - 36 V (IF = 185 mA, Tj = 85 °C) - Continued
Color
CCT
Range
3000 K
90 CRI
Minimum
2700 K
Minimum Luminous Flux
@ 185 mA
2-Step
Chromaticity
Region
4-Step
Group
Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
C0
370
424
D0
400
458
E0
440
504
MTGEZW-00-0000-0B0UE030H
MTGEZW-00-0000-0B0UE030F
B0
340
390
MTGEZW-00-0000-0B0UB027H
MTGEZW-00-0000-0B0UB027F
C0
370
424
D0
400
458
Order Code
Chromaticity
Region
MTGEZW-00-0000-0B0UC030H
30H
27H
MTGEZW-00-0000-0B0UD030H
MTGEZW-00-0000-0B0UC027H
MTGEZW-00-0000-0B0UD027H
Order Code
MTGEZW-00-0000-0B0UC030F
30F
27F
MTGEZW-00-0000-0B0UD030F
MTGEZW-00-0000-0B0UC027F
MTGEZW-00-0000-0B0UD027F
Notes:
•
•
•
•
•
•
•
*
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 14).
Minimum CRI for Standard color temperatures 27F, 27H, 30F, 30H is 80.
Minimum CRI for Standard color temperatures 35F, 35H, 40F, 40H is 77.
Minimum CRI for Standard color temperature 50F, 50H is 75.
Typical CRI for Standard color temperatures 35F, 35H, 40F, 40H is 80.
Minimum CRI for 85 CRI Minimum is 85.
Minimum CRI for 90 CRI Minimum is 90.
Flux values @ 25 °C are calculated and for reference only.
Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
6
XLamp ® MT-G EasyWhite ® LED
Relative Spectral Power Distribution White - the only roboto graph
The following graph represents typical spectral output of each die of the MT-G
Relative Spectral Power Distribution (6 V, 1100 mA; 36 V, 185 mA; TJ= 85 °C)
The following graph represents typical spectral output of the XLamp MT-G EasyWhite LED.
100%
Relative Spectral Power
80%
60%
Cool White
Warm White
40%
20%
0%
380
430
480
530
580
630
680
730
780
Wavelength (nm)
Relative Flux Output vs. Junction Temperature (If = 1100 mA, or 183.33 if @ 36V)
The following graph represents typical performance of each LED die in the XLamp MT-G
Relative Luminous Flux vs. Junction Temperature (6 V, 1100 ma; 36 V, 185 mA)
The following graph represents typical performance of the XLamp MT-G EasyWhite LED.
120%
Relative Luminous Flux
100%
80%
60%
40%
20%
0%
20
40
60
80
100
120
140
Junction Temperature (ºC)
Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
7
XLamp ® MT-G EasyWhite ® LED
Electrical Characteristics (Tsp = 85ºC)
6V
Electrical Characteristics (TJ = 85 °C)
4000
3500
Current (mA)
3000
2500
2000
6V
1500
1000
500
0
5
5.25
5.5
36V
5.75
6
6.25
Forward Voltage( V)
700
600
Current (mA)
500
400
36 V
300
200
100
0
31
32
33
34
35
36
37
38
Forward Voltage( V)
Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
8
XLamp ® MT-G EasyWhite ® LED
Relative Intensity vs. Current (Tsp = 85ºC)
Relative Luminous Flux vs. Current (TJ = 85 °C)
300%
Relative Luminous Flux
250%
200%
150%
6V
100%
50%
0%
0
500
1000
1500
2000
2500
3000
3500
4000
Forward Current, Pulsed (mA)
300%
Relative Luminous Flux
250%
200%
36 V
150%
100%
50%
0%
0
100
200
300
400
500
600
700
Forward Current, Pulsed (mA)
Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
9
XLamp ® MT-G EasyWhite ® LED
Spatial Distribution
Typical Spatial Distribution
The following graph represents typical performance of the XLamp MT-G EasyWhite LED.
100%
Relative Luminous Intensity
80%
60%
40%
20%
-90
-60
0%
-30
0
30
60
90
Angle (º)
Performance Groups – Brightness (TJ = 85 °C)
XLamp MT-G EasyWhite LEDs are tested for luminosity and placed into one of the following bins.
Group Code
Min. Luminous Flux
@ 1100 mA, 6 V;
@185 mA, 36 V
Max. Luminous Flux
@ 1100 mA, 6 V;
@185 mA, 36 V
A0
310
340
B0
340
370
400
C0
370
D0
400
440
E0
440
480
F0
480
520
G0
520
560
H0
560
600
J0
600
650
K0
650
700
Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
10
XLamp ® MT-G EasyWhite ® LED
Performance Groups – Chromaticity (TJ = 85 °C)
XLamp MT-G EasyWhite LEDs are tested for chromaticity and placed into one of the regions defined by the following bounding coordinates.
EasyWhite® Color Temperatures – 4-Step
EasyWhite® Color Temperatures – 4-Step
Code
50F
40F
35F
30F
27F
CCT
5000 K
4000 K
3500 K
3000 K
2700 K
x
y
0.3429
0.3507
0.3434
0.3571
0.3475
0.3604
0.3469
0.3539
0.3685
0.3784
0.3741
0.3837
0.3804
0.3818
0.3867
0.3857
x
y
0.3407
0.3459
0.3415
0.3586
0.3499
0.3654
0.3484
0.3521
0.3744
0.3782
Code
50H
40H
CCT
5000 K
4000 K
0.3912
0.3917
0.3863
0.3758
0.3844
0.3778
0.3981
0.3800
0.4030
0.3857
0.4040
0.3966
0.4061
0.3941
0.4186
0.4037
0.4132
0.3976
0.4116
0.3865
0.4099
0.3890
0.4242
0.3919
0.4291
0.3973
0.4322
0.4096
0.4333
0.4062
0.4395
0.4084
35H
30H
3500 K
3000 K
0.4449
0.4141
0.4359
0.3960
0.4351
0.3994
0.4475
0.3994
0.4528
0.4046
0.4573
0.4178
0.4578
0.4138
0.4695
0.4207
0.4638
0.4152
0.4589
0.4021
0.4586
0.4060
27H
2700 K
Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
11
XLamp ® MT-G EasyWhite ® LED
Cree EasyWhite® Color Temperatures Plotted on the 1931 CIE Curve (TJ = 85 °C)
0.45
ANSI C78.377 Quadrangle
EasyWhite 4-step
EasyWhite 2-step
0.44
2700 K
3000 K
0.43
3500 K
0.42
4000 K
4500 K
0.41
CCy
0.40
5000 K
0.39
5700 K
0.38
0.37
0.36
0.35
0.34
0.33
0.49
0.48
0.47
0.46
0.45
0.44
0.43
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.32
0.32
CCx
Bin and Order Code Formats
Bin codes and order codes are configured as follows:
Order CodeBin Code
SSSCCC-BB-HHHH-NNNRNNNNN
Series
MTG = MT-G
Series
MTG = MT-G
Internal code
Internal code
CRI Specification
U = 90 CRI minimum
P = 85 CRI minimum
0 = Standard CRI
Flux bin
CRI Specification
U = 90 CRI minimum
P = 85 CRI minimum
H = Standard minimum
Kit code
Vf class
B0 = 6-V class
N0 = 36-V class
Reel size
0 = 500 (standard)
1 = 100 (nonstandard)
Color
EZW = EasyWhite
SSSCCC-BB-WWW-FF-NNRAAAA
Internal Code
Vf class
B0 = 6-V class
N0 = 36-V class
Chromaticity bin
Color
EZW = EasyWhite
Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
12
XLamp ® MT-G EasyWhite ® LED
Reflow Soldering Characteristics
In testing, Cree has found XLamp MT-G EasyWhite LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As
a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder
paste used.
Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment.
tP
TP
Critical Zone
TL to TP
Temperature
Ramp-up
TL
tS
Tsmax
Tsmin
Ramp-down
ts
Preheat
25
t 25˚C to Peak
Profile Feature
Average Ramp-Up Rate (Tsmax to Tp)
IPC/JEDEC J-STD-020C
Time
Lead-Free Solder
1.2 °C/second
Preheat: Temperature Min (Tsmin)
120 °C
Preheat: Temperature Max (Tsmax)
170 °C
Preheat: Time (tsmin to tsmax)
65-150 seconds
Time Maintained Above: Temperature (TL)
Time Maintained Above: Time (tL)
217 °C
45-90 seconds
Peak/Classification Temperature (Tp)
235 - 245 °C
Time Within 5 °C of Actual Peak Temperature (tp)
20-40 seconds
Ramp-Down Rate
1 - 6 °C/second
Time 25 °C to Peak Temperature
4 minutes max.
Note: All temperatures refer to the topside of the package, measured on the package body surface.
Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
13
XLamp ® MT-G EasyWhite ® LED
Notes
Measurements
The luminous flux, radiant power, chromaticity and CRI measurements in this document are binning specifications only and solely
represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors
that are not within Cree’s control and are not intended or provided as operational specifications for the products. Calculated values are
provided for informational purposes only and are not intended as specifications.
Pre‑Release Qualification Testing
Please read the LED Reliability Overview for details of the qualification process Cree applies to ensure long-term reliability for XLamp
LEDs and details of Cree’s pre-release qualification testing for XLamp LEDs.
Lumen Maintenance
Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance.
For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document.
Moisture Sensitivity
Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering.
Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity.
Once the MBP is opened, XLamp MT-G EasyWhite LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor
life in conditions of ≤ 30 ºC/85% relative humidity (RH). Regardless of storage condition, Cree recommends sealing any unsoldered LEDs
in the original MBP.
RoHS Compliance
The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as
implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product
Documentation sections of www.cree.com.
REACh Compliance
REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA)
has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to
insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available
upon request.
UL® Recognized Component
Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/
UL 8750.
Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
14
XLamp ® MT-G EasyWhite ® LED
Notes - Continued
Vision Advisory
WARNING. Do not look at exposed LED lamps in operation. Eye injury can result. For more information about LEDs and eye safety, please
refer to the LED Eye Safety application note.
Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
15
6
6
5
5
5
4
4
4
NOTICE NOTICE
CE
REE CONFIDENTIAL.
THIS
AND THE INFORMATION
FIDENTIAL.
THIS PLOT
ANDPLOT
THE INFORMATION
S
PLOT AND
THE
ONTAINED
WITHIN
ARE THE PROPRIETARY
AND
D
WITHIN
ARE
THEINFORMATION
PROPRIETARY
AND
HE
PROPRIETARY
AND
ONFIDENTIAL
INFORMATION
CREE,
THIS PLOT
TIAL
INFORMATION
OF
CREE,OF
INC.
THIS INC.
PLOT
ION
OF CREE,
INC. THIS
PLOT
AY
NOT
BEREPRODUCED
COPIED,
REPRODUCED
OR DISCLOSED
E
COPIED,
OR DISCLOSED
TO ANY TO ANY
NAUTHORIZED
WITHOUT
THE WRITTEN
RODUCED
OR PERSON
DISCLOSED
TO
ANY
RIZED
PERSON
WITHOUTTHE
WRITTEN
CONSENTCONSENT
F
CREE INC.
WITHOUT
THE WRITTEN CONSENT
NC.
3
3
3
2
B
B
C
C
6
5
D
5
.650
.650
4
8.900
6.000
MT-G 36 V
4.85
±.25
8.90
.889
.500
.889
.889
1.090
1.090
1.090
.950
8.072
8.900
8.072
6.198
.650
.500
.937
1.722
1.722
8.90
.937
3.175 3.175
6.198
B B
6.000
6.0006.000
1.090
1.090
1.090
9.113
8.072
6.198
8.900
.889
.889
.889
.937
ANODE
3.175
1.722
.500
R4.100
3.175 3.175
.937
.937
3.175
6.000
R4.100
.937
DRAWN BYDRAWN BY DATE
DRAWN
BY
DATE
.950
.950
.950
.950
8.900
.500
.889
.500
5
8.900
4
4
3
4
SCALE
2
3
3
2
.937 2
DRAWING
NO.
SIZEDRAWING
NO.
C C
REV. REV.
DRAWING NO.
2610-00011
2610-00011
2610-00011
C
CD
SCALE
9.000
9.000
SCALE
SHEETSHEETOF
9.000
1
OF SHEET
1 /1 1 /1
OF
1
1
.889
1.090
6.000
A A
3.175
.889
.500
Fax (919)
Fax (919) 313-555
Fax313-5558
(919) 313-5558
TITLE
TIGER
91919191
OUTLINE
TIGER
9191 OUTLINE
TIGER
OUTLINE
1.090
8.839
00
Phone Phone
(919) 313-5300
Phone (919) 313(919) 313-5300
.889
1.090
5
5
4600 Silicon
Drive Drive
4600 Silicon Drive
4600 Silicon
Durham,
N.C 27703
Durham, N.C 277
Durham,
N.C 27703
8.839
1.6 FINISH: 1.6
SURFACE SURFACE
FINISH: 1.6
SURFACE
FINISH:
6
6
DATE
UNLESS OTHERWISE
SPECIFIED
UNLESS OTHERWISE
UNLESS OTHERWISE
SPECIFIED SPECIFIED
10/8/10
D. CRONIN
10/8/10
10/8/10
DIMENSIONS
ARE IN DIMENSIONS
ARE IND. CRONIN
DIMENSIONS
ARE IN D. CRONIN
CHECK
DATE
CHECK
MILLIMETERS
AND AFTER
FINISH.
MILLIMETERS
AND
AFTER
FINISH.DATECHECKDATE
MILLIMETERS
AND
AFTER FINISH.
1.072
1.072 1.072
TOLERANCE
UNLESS SPECIFIED:
TOLERANCE
UNLESS SPECIFIED:
TOLERANCE
UNLESS SPECIFIED:
.XX ± .XX
.25 ±
.XXAPPROVED
±
.25
.25
APPROVED
DATE
APPROVED DATE
DATE
1.905
1.905 1.905
TITLE
.XXX ± .XXX
.125 ±
.XXX ±
.125
TITLE
.125
X°
± X°.5 ° ±
±
.5 °
.5X°°
1.905
1.905 1.905
THIRD ANGLE
PROJECTION
THIRD
ANGLE PROJECTION
THIRD
ANGLE
PROJECTION
MATERIAL MATERIAL
MATERIAL
FOR SHEET
METAL
PARTS
FOR ONLY
SHEET
METAL
FOR
SHEET
METAL
PARTS
ONLYPARTS ONLY
.X
±
.X
±
1.5
.X 1.5 ±
1.5
SIZE
SIZE
.XX ± .XX
.75 ±
.XX ±
.75
.75
RECOMMENDED
STENCILSTENCIL
PATTERN
RECOMMENDED
STENCIL
PATTERN
RECOMMENDED
PATTERN
.XXX ± .XXX
.25 ±
FINAL
FINISH
.XXX ±PROTECTIVE
.25
FINAL PROTECTIVE FINISH
.25
FINAL PROTECTIVE
FINISH
X°
± X°.5 ° ±
±
.5 °
.5X°°
B SOLDER
ED PCRECOMMENDED
BOARD
PAD
PC
BOARD
PAD
ECOMMENDED
PC BOARD
SOLDERSOLDER
PAD
6.000
50
4.85
±.25
8.90
.650
8.839
8.839
8.839
.500
8.900
8.90
8.908.90
.500 .500
.500
6.000
6.000
INITIAL RELEASE
8.90
8.900
C
DESCRIPTION
A
R4.100 R4.100 R4.100
C
C
REVISONS
9.113
8.900
2
REV
8.90
.500
D
.950
.950 .950
3
ANODE
MT-G 68.90
V
3/25/11
8.90
8.90 8.90
NOTICE
E CONFIDENTIAL. THIS PLOT AND THE INFORMATION
TAINED WITHIN ARE THE PROPRIETARY AND
FIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
UTHORIZED PERSON WITHOUTTHE WRITTEN CONSENT
CREE INC.
9.113
2/18/11
3
4.85
±.25
4.85
±.25
4.85
±.25
8.90
6
10/8/10
1/11/11
All measurements are ±.25 mm unless otherwise indicated.
.650
D
BY
DATE
DATE
APP'D
DATE
APP'D
XLamp MT-G EasyWhite LED
4
NOTICE
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
CONTAINED WITHIN ARE THE PROPRIETARY AND
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
UNAUTHORIZED PERSON WITHOUTTHE WRITTEN CONSENT
OF CREE INC.
8.90
BY
BY
D
Mechanical Dimensions
9.113
DESCRIPTIONDESCRIPTION
DESCRIPTION
DC
INITIAL RELEASE
DC 10/8/10
INITIAL RELEASE
DC 10/8/10
INITIAL RELEASE
DC
B
CHANGED
SOLDER
®
CHANGED
SOLDER PAD
VIEW PAD VIEW ® DC 1/11/11
DC 1/11/11
CHANGED SOLDER PAD VIEW
DC
C
ADDEDVIEW
STENCIL VIEW
DC
ADDED STENCIL
2/18/11
DC
ADDED STENCIL VIEW
2/18/11
CHANGED
OVERALL
MATCHAND
CUTWIDTH
LENGTH AND WIDTH
DIM TO
MATCH DIM
CUTTO
LENGTH
DC
DCHANGED OVERALL
DC
3/25/11
A
A
A
1
1
1
REVISONS REVISONS
REVISONS
REV
REV
REV
2
2
8.900
8.072
1.090
6.198
1.722
.937
3.175
3.175
.937
8.900
A
8.072
6.198
1.722
.950
.950
UNLESS OTHE
DIMENSIO
MILLIMETERS A
TOLERANCE U
.XX
.XXX
X°
1.072
1.905
3.175
.937
RECOMMENDED PC BOARD SOLDER PAD
1.905
UNLESS OTHERWISE SPECIFIED
RECOMMENDED STENCIL PATTERN
1.072
.950
6
1.905
5
4
1.905
RECOMMENDED PC BOARD SOLDER PAD
THIRD ANGLE PROJECTION
THIRD ANGLE PROJECTION
RECOMMENDED STENCIL PATTERN
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
.XX ±
.25
.XXX ±
.125
X°
±
.5 °
FOR SHEET METAL PARTS ONLY
.X
±
1.5
.XX ±
.75
.XXX ±
.25
X°
±
.5 °
DRAWN BY
D. CRONIN
FOR SHEET M
.X
.XX
.XXX
X°
DATE
10/8/10
CHECK
DATE
APPROVED
DATE
SURFACE FIN
3
TITLE
36V
MATERIAL
SIZE
FINAL PROTECTIVE FINISH
SCALE
Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree , XLamp and EasyWhite SURFACE
are registered
FINISH: 1.6trademarks and the Cree logo is a
trademark
of Cree, Inc. UL® and the UR logo are registered
trademarks of UL LLC.
6
5
4
3
2
®
®
®
16
C
9.000
DRAW
XLamp ® MT-G EasyWhite ® LED
6
5
4
3
2
1
REVISONS
NOTICE
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
CONTAINED WITHIN ARE THE PROPRIETARY AND
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
UNAUTHORIZED PERSON WITHOUTTHE WRITTEN CONSENT
OF CREE INC.
REV
Tape and Reel
DESCRIPTION
BY
DATE
A
Initial Release
DC
1/28/11
B
Added missing sprocket holes
DDS
10/17/11
APP'D
All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard.
D
All dimensions in mm.
D
1.5± .1
User Feed Direction
4±.10
12±.1
END
1.75
±.10
START
CATHODE SIDE
5.25
16
+.3
-.0
C
9.4
C
ANODE SIDE
6
6
Trailer
NOTICE NOTICE
160mm
(min) of
CREE CONFIDENTIAL.
CREE CONFIDENTIAL.
THIS PLOT
THIS
AND
PLOT
THEAND
INFORMATION
THE INFORMATION
emptyAND
pockets
CONTANED
CONTANED
WITHIN WITHIN
ARE THEARE
PROPRIETARY
THE PROPRIETARY
AND
CONFIDENTIAL
CONFIDENTIAL
INFORMATION
INFORMATION
OF CREE,
OFINC.
CREE,
THIS
INC.
PLOT
THIS PLOT
sealed
with
tape
MAY NOT
MAY
BE NOT
COPIED,
BE COPIED,
REPRODUCED
REPRODUCED
OR DISCLOSED
OR DISCLOSED
TO ANY TO ANY
(15WRITTEN
pockets
min.)
UNAUTHORIZED
UNAUTHORIZED
PERSONPERSON
WITHOUT
WITHOUT
THE
THE WRITTEN
CONSENT
CONSENT
5
5
4
4
3
Loaded Pockets
(500 Lamps)
3
2
2
1
1
2400-00009
2400-00009
Leader
400mm (min) of1
empty pockets2
sealed with tape
(35 pockets min.)
INDEX
OF CREE
OF
INC.
CREE INC.
QTYINDEX ITEM
QTY
11
22
ITEM
COMMENTS
COMMENTS
2400-00009-CORE
1
2400-00009-CORE
2400-00009-REEL
2
2400-00009-REEL
D
D
D
C
C
B
B
12.4 12.4
+.2
+.2
.0
.0
MEASURED
AT HUBAT HUB
MEASURED
C
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
.XX ±
.25
.XXX ±
.125
X°
±
.5 °
16.4 16.4
THIRD ANGLE PROJECTION
FOR SHEET METAL PARTS ONLY
+0.2 +0.2
.X ±
1.5
.0
.0
.XX ±
.75
.XXX
.25
MEASURED
AT HUB
MEASURED
AT±±HUB
X°
.5 °
A
330
+.25
-.75
330
+.25
-.75
DATE
DRAWN BY
D. CRONIN
CHECK
5
4
Phone (919) 313-5300
--
APPROVED
Fax (919) 313-5558
A
DATE
--
--
TITLE
MTG LOADING SPEC
MATERIAL
-- 1.9±.4 1.9±.4
SIZE
--
3
SCALE
REV.
DRAWING NO.
C
FINAL PROTECTIVE FINISH
SURFACE FINISH: 1.6
6
4600 Silicon Drive
Durham, N.C 27703
1/28/11
DATE
--
2402-00016
B
SHEET
3.000
2
OF
21 ±.41 / 121 ±.4
1
13.1 ±.2
13.1 ±.2
B
B
B
12.4 12.4
+1.0 +1.0
-.5
-.5
MEASURED
MEASURED
AT EDGE
AT EDGE
60°
60°
60°
60°
REVISONSREVISONS
REV
REV
DRAWN BY
DATE
DRAWN BY
DATE
BY
APP'D
DATE
APP'D
DATE
UNLESS OTHERWISE
UNLESS OTHERWISE
SPECIFIED SPECIFIED
D. CRONIND. CRONIN
09/29/09 09/29/09
DIMENSIONS
DIMENSIONS
ARE IN INCHES
ARE IN INCHES
CHECK DATE
DATE
AND AFTERAND
FINISH.
AFTER FINISH.CHECK
TOLERANCE
TOLERANCE
UNLESS SPECIFIED:
UNLESS SPECIFIED:
--- --.XX ±
.XX
.01 ±
.01APPROVED APPROVED
DATE
DATE
TITLE
.XXX ± .XXX
.005 ±
.005
--- --X°
±
X°
.5 ° ±
.5 °
THIRD ANGLE
THIRD
PROJECTION
ANGLE PROJECTION
MATERIAL
FOR SHEETFOR
METAL
SHEET
PARTS
METAL
ONLY
PARTS
ONLY MATERIAL
.X
±
.X.06 ±
.06
SIZE
ANTI-STATIC
ANTI-STATIC
HIPS
HIPS
.XX ±
.XX
.03 ±
.03
.XXX ± .XXX
.010 ±
.010
FINAL PROTECTIVE
FINAL
FINISH
PROTECTIVE FINISH
X°
±
X°
.5 ° ±
.5 °
A
BY
DESCRIPTION
DESCRIPTION
4600 Silicon Drive
4600 Silicon Drive
Durham, N.C 27703
Durham, N.C 27703
Phone (919) 313-5300
Phone (919) 313-5300
Fax (919) 313-5558
Fax (919) 313-5558
A
TITLE
A
REEL, REEL,
13" X 12MM,
13" X 12MM,
3 PIECE
3 PIECE
SNAP SNAP
SURFACE FINISH:
SURFACE63
FINISH:
6
6
5
5
4
4
3
63
3
-
-
2
2
C
SCALE
SIZE
SCALE
0.500
REV.
DRAWING NO.DRAWING NO.
C
0.500
SHEET
1
OF
SHEET
®
A
OF
1 /1
1
Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree , XLamp and EasyWhite are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
®
REV.
2400-00009
2400-00009 A
®
17
1 /1
XLamp ® MT-G EasyWhite ® LED
Humidity Indicator
Card (inside bag)
Packaging
Dessicant
(inside bag)
Unpackaged Reel
Label with Cree Bin Code,
Quantity, Reel ID
Packaged Reel
Label with Cree Bin
Code, Qty, Lot #
Vacuum-Sealed
Moisture Barrier Bag
Label with Cree Order Code,
Quantity, Reel ID, PO #
Label with Cree Bin Code,
Quantity, Reel ID
Label with Custom
Code, Qty, Reel I
Boxed Reel
Label with Cree Order Code,
Quantity, Reel ID, PO #
Patent Label
Label with Cree Bin Code,
Quantity, Reel ID
Patent Label
Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
18
Similar pages