Wall JFC48D3.3-500G Six-sided shielding Datasheet

JFC SERIES
15 Watts
DC DC Converter
Single and Dual Outputs
Rev F
Size: 1.0in x 1.0in x 0.39in (25.4mm x 25.4mm x 9.9mm)
OPTIONS
• Negative Logic Remote
On/Off
• Without Trim
• On/Off Pin
• Input Ranges
• Output Voltages
APPLICATIONS
•
•
•
•
•
FEATURES
•
•
•
•
•
•
•
•
Six-Sided Shielding
High Efficiency up to 91%
Fixed Switching Frequency
2:1 Wide Input Voltage Range
1600VDC Input to Output Isolation
Compliant to RoHS II & Reach
CE Marked
Useful in a variety of applications
•
•
•
•
•
•
Small Size and Low Profile: 1.0” x 1.0” x 0.39 inches
Industry Standard Pin-Out DM Series Compatible
Over Voltage, Over Load, and Short Circuit Protection
UL60950-1, EN60950-1, & IEC60950-1 Safety Approvals
CE Marked
Positive/Negative Logic Remote On/Off, Without Trim, Without
On/Off Pin options
• 9~18VDC, 18~36VDC, and 36~75VDC input ranges available
DESCRIPTION
Measurement
Telecom/Datacom
Industry Control Systems
Semiconductor Equipment
Distributed Power Architects
The JFC series of single and dual output DC/DC converters provide up to 15 watts of output power in an industry
standard package and footprint. These units are specifically designed to meet power needs in a low profile
package. All models feature a 2:1 wide input voltage range of 9~18VDC, 18~36VDC, or 36~75VDC. Some
features include positive or negative remote on/off, 1600VDC I/O isolation, and trimmable output voltage. All
models are protected against over current, input under voltage, over voltage, and short circuit conditions.
MODEL SELECTION TABLE
Single Output Models
Model Number
JFC12S3.3-4000
JFC12S5-3000
JFC12S12-1300
JFC12S15-1000
JFC12S24-625
JFC24S3.3-4000
JFC24S5-3000
JFC24S12-1300
JFC24S15-1000
JFC24S24-625
JFC48S3.3-4000
JFC48S5-3000
JFC48S12-1300
JFC48S15-1000
JFC48S24-625
1/9/2018
Input Voltage
Range
12VDC
(9~18VDC)
24VDC
(18~36VDC)
48VDC
(36~75VDC)
Output
Voltage
3.3VDC
5VDC
12VDC
15VDC
24VDC
3.3VDC
5VDC
12VDC
15VDC
24VDC
3.3VDC
5VDC
12VDc
15VDC
24VDC
Output Current
Ripple & Noise
4000mA
3000mA
1300mA
1000mA
625mA
4000mA
3000mA
1300mA
1000mA
625mA
4000mA
3000mA
1300mA
1000mA
625mA
75mVp-p
75mVp-p
100mVp-p
100mVp-p
100mVp-p
75mVp-p
75mVp-p
100mVp-p
100mVp-p
100mVp-p
75mVp-p
75mVp-p
100mVp-p
100mVp-p
100mVp-p
No Load
Input Current
120mA
90mA
30mA
30mA
12mA
50mA
65mA
20mA
20mA
10mA
25mA
35mA
12mA
12mA
10mA
Output Power
Up to 15W
Up to 15W
Up to 15W
Maximum
Capacitive Load
12000µF
6000µF
1000µF
660µF
200µF
12000µF
6000µF
1000µF
660µF
200µF
12000µF
6000µF
1000µF
660µF
200µF
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Efficiency
84%
88%
86%
88%
90%
86%
88%
87%
88%
90%
86%
88%
88%
88%
91%
Page 1 of 11
JFC SERIES
15 Watts
DC DC Converter
Single and Dual Outputs
Rev F
MODEL SELECTION TABLE
Dual Output Models
Input Voltage
Range
Model Number
JFC12D5-1500
JFC12D12-625
JFC12D15-500
JFC12D24-315
JFC24D5-1500
JFC24D12-625
JFC24D15-500
JFC24D24-315
JFC48D5-1500
JFC48D12-625
JFC48D15-500
JFC48D24-315
12VDC
(9~18VDC)
24VDC
(18~36)
48VDC
(36~75VDC)
Output
Voltage
Output Current
Ripple & Noise
±5VDC
±12VDC
±15VDC
±24VDC
±5VDC
±12VDC
±15VDC
±24VDC
±5VDC
±12VDC
±15VDC
±24VDC
±1500mA
±625mA
±500mA
±315mA
±1500mA
±625mA
±500mA
±315mA
±1500mA
±625mA
±500mA
±315mA
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
Maximum
Capacitive
Load(2)
±3000µF
±520µF
±330µF
±100µF
±3000µF
±520µF
±330µF
±100µF
±3000µF
±520µF
±330µF
±100µF
No Load
Output Power
Input Current(1)
30mA
30mA
30mA
17mA
15mA
15mA
25mA
12mA
12mA
15mA
20mA
10ma
Up to 15W
Up to 15W
Up to 15W
Efficiency(3)
85%
87%
88%
90%
85%
88%
88%
90%
85%
89%
88%
91%
SPECIFICATIONS
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
Typ
Max
9
18
36
12
24
48
18
36
75
9
18
36
Unit
INPUT SPECIFICATIONS
Operating Input Voltage Range
Start-Up Voltage
Shutdown Voltage
12Vin(nom)
24Vin(nom)
48Vin(nom)
12Vin(nom)
24Vin(nom)
48Vin(nom)
12Vin(nom)
24Vin(nom)
48Vin(nom)
Input Surge Voltage
100ms, max.
Input Reflected Ripple Current
Input Filter
OUTPUT SPECIFICATIONS
Output Voltage
Voltage Accuracy
Nominal Input and Full Load
Line Regulation
Low Line to High Line at Full Load
Load Regulation
No Load to Full Load
Voltage Adjustability(4)
Single Output
8
14.5
30.5
Transient Response Recovery Time
Start-Up Time
Temperature Coefficient
1/9/2018
VDC
VDC
12Vin(nom)
24Vin(nom)
48Vin(nom)
36
50
100
30
VDc
mAp-p
Pi Type
Single
Dual
Single
Dual
24Vout
Others
-1.0
-0.2
-0.5
-0.2
-1.0
-10
-10
Output Power
Output Current
Maximum Capacitive Load
Ripple & Noise (20MHz bandwidth)
VDC
Single
3.3Vout, 5Vout
12Vout, 15Vout
24Vout
Dual
With a 4.7µF/50V X7R MLCC for each output
24Vout
With a 1µF M/C X7R and a 10µF T/C for each output Others
25% load step change
Power Up
Constant Resistive Load
Remote On/Off
With a 1µF M/C X7R and a 10µF T/C
With a 1µF M/C X7R and a 10µF T/C
With a 6.8µF/50V X7R MLCC
See Table
+1.0
+0.2
+0.5
+0.2
+1.0
+20
+10
See Table
See Table
See Table
75
100
100
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
%
%
%
mVp-p
100
100
250
-0.02
%
µs
30
30
+0.02
ms
%/ºC
Page 2 of 11
JFC SERIES
15 Watts
DC DC Converter
Single and Dual Outputs
Rev F
SPECIFICATIONS
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
Typ
Max
Unit
REMOTE ON/OFF CONTROL(5)
Positive Logic (standard)
Negative Logic (option)
DC-DC ON
DC-DC OFF
DC-DC ON
DC-DC OFF
Input Current of CTRL Pin
Remote OFF Input Current
PROTECTION
Short Circuit Protection
Over Load Protection
-0.5
Natural Convection (20LFM)
Thermal Shock
Relative Humidity
Vibration
MTBF
GENERAL SPECIFICATIONS
Efficiency
Switching Frequency
-40
+60
Without Heat-Sink
With Heat-Sink
MIL-HDBK-217F, Full Load
1 Minute
Isolation Resistance
Isolation Capacitance
PHYSICAL SPECIFICATIONS
Weight
500VDC
Input to Output
Input (Output) to Case
360
1600
1000
1
ºC
ºC
ºC
18.2
15.8
MIL-STD-810F
95
MIL-STD-810F
1.600 x 106 hrs
ºC/W
%RH
See Table
400
440
kHz
VDC
GΩ
pF
1000
0.53oz (15g)
1.0in x 1.0in x 0.39in
(25.4mm x 25.4mm x 9.9mm)
Nickel-Coated Copper
FR4 PCB
Epoxy (UL94 V-0)
Dimensions (L x W x H)
Case Material
Base Material
Potting Material
SAFETY & EMC CHARACTERISTICS
Safety Approvals
Pending: JFCxxS24-xxxx, JFCxxD24-xxxx
EMI(7)
EN55022
ESD
Radiated Immunity
Fast Transient(8)
Surge(8)
Conducted Immunity
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
Power Frequency Magnetic Field
EN61000-4-8
1/9/2018
+60
+105
105
+125
-55
5
Isolation Voltage
mA
mA
Continuous, Automatic Recovery
150
%
3.7
5.4
5.6
7.0
13.5
19.6
VDC
16.8
20.5
29.1
32.5
% of Lout Rated; Hiccup Mode
3.3Vout
5Vout
Over Voltage Protection
12Vout
15Vout
24Vout
ENVIRONMENTAL SPECIFICATIONS
Without Derating
Operating Ambient Temperature
With Derating
Maximum Case Temperature
Storage Temperature Range
Thermal Impedance(6)
Open or 3~15VDC
Short or 0~1.2VDC
Short or 0~1.2VDC
Open or 3~15VDC
1.0
2.5
Air ±8kV and Contact ±6kV
10 V/m
±2kV
±1kV
3 Vr.m.s
100A/m continuous; 1000A/m 1
second
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
UL60950-1
EN60950-1
IEC60950-1
Class A
Class B
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Page 3 of 11
JFC SERIES
15 Watts
DC DC Converter
Single and Dual Outputs
Rev F
NOTES
(1)
(2)
(3)
(4)
Typical Value at Nominal Input Voltage and No Load.
Test by Minimum Vin and Constant Resistive Load.
Typical Value at Nominal Input Voltage and Full Load.
Trimming allows the user to increase or decrease the output voltage set point of the module. This is accomplished by connecting an external
resistor between the Trim pin and either +Vout pin or –Vout pin.
(5) The ON/OFF Control pin voltage is referenced to –Vin. (See the “Product Standard Table” below for suffix options)
(6) For Heat Sink option add the suffix “HS” to the part number (Ex: JFC48S5-3000HS)(P/N: 7G-0047C-F). See attached for more details.
(7) The JFC series can meet EN55022 Class A and Class B with external capacitors connected in parallel to the input pins. See attached for more
details.
(8) An external filter capacitor is required if the module has to meet EN61000-4-4 and EN61000-4-5. The filter capacitor suggested is Nippon chemicon KY series, 220µF/100V.
Caution: This power module is not internally fused. An input line fuse must always be used.
*Due to advances in technology, specifications subject to change without notice.
DERATING CURVES
JFC48S5-3000 Derating Curve
JFC48S5-3000 Derating Curve With Heat-Sink
EFFICIENCY GRAPHS
JFC48S5-3000 Efficiency vs. Input Voltage
1/9/2018
JFC48S5-3000 Efficiency vs. Output Load
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 4 of 11
JFC SERIES
15 Watts
DC DC Converter
Single and Dual Outputs
Rev F
MECHANICAL DRAWINGS
PIN
1
2
3
4
5
6
PIN Connection
SINGLE
DUAL
+Vin
+Vin
-Vin
-Vin
Ctrl
Ctrl
+Vout
+Vout
Trim
Common
-Vout
-Vout
External Output Trimming
Output can be externally trimmed
by using the method shown below
Product Standard Table
1.
2.
3.
4.
1/9/2018
All dimensions in inch (mm)
Tolerance: x.xx±0.02 (x.x±0.5)
x.xxx±0.01 (x.xx±0.25)
Pin pitch tolerance ±0.01 (0.25)
Pin dimension tolerance ±0.004 (0.1)
Option
Negative Remote ON/OFF
Positive Remote ON/OFF
Without ON/OFF Pin
Without ON/OFF & TRIM Pin
Negative Remote ON/OFF without
TRIM pin
Positive Remote ON/OFF without
TRIM pin
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Suffix
R
Blank
D
G
RF
F
Page 5 of 11
JFC SERIES
15 Watts
DC DC Converter
Single and Dual Outputs
Rev F
HEATSINK OPTIONS
Equip heat-sink for lower temperature and higher reliability of the module. There are two types to choose from.
1” x 1” Heat-Sink
Dimensions in inch (mm)
2” x 1” Heat Sink
Dimensions in inch (mm)
1/9/2018
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 6 of 11
Rev F
JFC SERIES
15 Watts
DC DC Converter
Single and Dual Outputs
2” x 1.6” Heat-Sink
Dimensions in inch (mm)
2” x 2” Heat Sink
1/9/2018
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 7 of 11
JFC SERIES
15 Watts
DC DC Converter
Single and Dual Outputs
Rev F
RECOMMENDED FILTERS
Recommended External Filter for EN55022 Class A
MODEL
JFC12xx-xxxx
JFC24xx-xxxx
JFC48xx-xxxx
C1
10µF/25V
1812 MLCC
6.8µF/50V
1812 MLCC
2.2µF/100V
1812 MLCC
C2
N/A
6.8µF/50V
1812 MLCC
2.2µF/100V
1812 MLCC
C3
470pF/2kV
1808 MLCC
470pF/2kV
1808 MLCC
470pF/2kV
1808
C4
470pF/2kV
1808 MLCC
470pF/2kV
1808 MLCC
470pF/2kV
1808 MLCC
Recommended External Filter for EN55022 Class B
MODEL
JFC12xx-xxxx
JFC24xx-xxxx
JFC48xx-xxxx
1/9/2018
C1
10µF/25V
1812 MLCC
6.8µF/50V
1812 MLCC
2.2µF/100V
1812 MLCC
C2
N/A
N/A
2.2µF/100V
1812 MLCC
C3
10µF/25V
1812 MLCC
6.8µF/50V
1812 MLCC
2.2µF/100V
1812 MLCC
C4
470pF/2kV
1808 MLCC
470pF/2kV
1808 MLCC
1000pF/2kV
1808 MLCC
C5
470pF/2kV
1808 MLCC
470pF/2kV
1808 MLCC
1000pF/2kV
1808 MLCC
L1
145µH
Common Choke PMT-051
325µH
Common Choke PMT-050
325µH
Common Choke PMT-050
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 8 of 11
JFC SERIES
15 Watts
DC DC Converter
Single and Dual Outputs
Rev F
OUTPUT VOLTAGE ADJUSTMENT
Output voltage set point adjustment allows the user to increase or decrease the output voltage set point of the module. This is
accomplished by connecting an external resistor between the TRIM pin and either the +OUTPUT or –OUTPUT pins. With an external
resistor between the TRIM and –OUTPUT pin, the output voltage set point increases. With an external resistor between the TRIM and
+OUTPUT pin, the output voltage set point decreases. The external TRIM resistor needs to be at least 1/16W or rated power.
Trim Up Equation
Trim Down Equation
Module
JFCxxS3.3-xxxx
JFCxxS5-xxxx
JFCxxS12-xxxx
JFCxxS15-xxxx
JFCxxS24-xxxx
Trim Constants
G
H
5110
2050
5110
2050
10000 5110
10000 5110
56000 13000
K
0.8
2.5
9.5
12.5
21.5
L
2.5
2.5
2.5
2.5
2.5
Output Voltage Adjustment Configurations
JFCxxS3.3-xxxx TRIM-UP
Trim-Up (%)
1
Vout (V)
3.333
RU (kΩ)
385.071
2
3.366
191.511
TRIM-DOWN
Trim-Down (%)
Vout (V)
RD (kΩ)
2
3.234
54.779
1
3.267
116.719
JFCxxS5-xxxx TRIM-UP
Trim-Up (%)
1
Vout (V)
5.050
RU (kΩ)
253.450
TRIM-DOWN
Trim-Down (%)
Vout (V)
RD (kΩ)
1/9/2018
1
4.950
248.340
2
5.100
125.700
2
4.900
120.590
3
3.399
126.990
3
3.201
34.133
3
5.150
83.117
3
4.850
78.007
4
3.432
94.730
4
3.168
23.810
4
5.200
61.825
4
4.800
56.715
5
3.465
75.374
5
3.135
17.616
5
5.250
49.050
5
4.750
43.940
6
3.498
62.470
6
3.102
13.486
6
5.300
40.533
6
4.700
35.423
7
3.531
53.253
7
3.069
10.537
7
5.350
34.450
7
4.650
29.340
8
3.564
46.340
9
3.597
40.963
10
3.630
36.662
8
3.036
8.325
9
3.003
6.604
10
2.970
5.228
8
5.400
29.888
9
5.450
26.339
10
5.500
23.500
9
4.550
21.229
10
4.500
18.390
8
4.600
24.778
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 9 of 11
JFC SERIES
15 Watts
DC DC Converter
Single and Dual Outputs
Rev F
JFCxxS12-xxxx TRIM-UP
Trim-Up (%)
1
Vout (V)
12.120
RU (kΩ)
203.223
TRIM-DOWN
Trim-Down (%)
Vout (V)
RD (kΩ)
1
11.880
776.557
JFCxxS15-xxxx TRIM-UP
Trim-Up (%)
1
Vout (V)
15.150
RU (kΩ)
161.557
TRIM-DOWN
Trim-Down (%)
Vout (V)
RD (kΩ)
2
12.240
99.057
3
12.360
64.334
2
11.760
308.723
3
11.640
248.779
2
15.300
78.223
3
15.450
50.446
4
12.480
46.973
5
12.600
36.557
4
11.520
182.807
4
15.600
36.557
6
12.720
29.612
5
11.400
143.223
5
15.750
28.223
7
12.840
24.652
6
11.280
116.834
6
15.900
22.668
8
12.960
20.932
7
11.160
97.985
7
16.050
18.700
9
13.080
18.038
8
11.040
83.848
8
16.200
15.723
10
13.200
15.723
9
10.920
72.853
10
10.800
64.057
9
16.350
13.409
10
16.500
11.557
1
14.850
818.223
2
14.700
401.557
3
14.550
262.668
4
14.400
193.223
5
14.250
193.223
6
14.000
151.557
7
13.750
103.938
8
13.500
89.057
9
13.250
77.483
10
13.000
68.223
JFCxxS24-xxxx TRIM-UP
Trim-Up (%)
1
Vout (V)
24.240
RU (kΩ)
570.333
2
24.480
278.667
3
24.720
181.444
4
24.960
132.833
5
25.200
13.667
6
25.440
84.222
7
25.680
70.333
8
25.920
59.917
9
26.160
51.815
10
26.400
45.333
12
26.880
35.611
13
27.120
31.872
14
27.360
28.667
15
27.600
25.889
16
27.840
23.458
17
28.080
21.314
18
28.320
19.407
19
28.560
17.702
20
28.800
16.167
7
22.320
647.667
8
22.080
558.083
9
21.840
488.407
10
21.600
423.667
Trim-Up (%)
Vout (V)
RU (kΩ)
11
26.640
40.030
TRIM-DOWN
Trim-Down (%)
Vout (V)
RD (kΩ)
1
23.760
4947.667
2
23.520
2439.333
3
23.280
1603.222
4
23.040
1185.167
5
22.800
934.333
6
22.560
767.111
The power module should be connected to a low impedance input source. Highly inductive source impedance can affect the stability of the
power module.
Install CSIM and LSIM to simulate the impedance of power source. External input capacitors CFILTER serve primarily as energy-storage
elements, minimizing line voltage variations caused by transient IR drops in conductors from backplane to the DC/DC. The capacitor must
be as close as possible to the input terminals of the power module for lower impedance. For the input reflected-ripple current measurement
configuration is shown as below:
Input reflected-ripple current measurement setup
JFCxxSxx-xxxx
Component
LSIM
CSIM~CFILTER
1/9/2018
Value
12µH
10µF
Voltage
---100V
Reference
Inductor
Nippon chemi-con KY-series
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 10 of 11
JFC SERIES
15 Watts
DC DC Converter
Single and Dual Outputs
Rev F
MODEL NUMBER SETUP
JFC
24
Series Name Input Voltage
S
12
Output Quantity
Output Voltage
12: 9~18VDC
S: Single
24: 18~36VDC
D: Dual
48: 36~75VDC
-
3.3: 3.3VDC
1300
D
Ouptut Current
Suffix
4000: 4000mA
Blank: Pos. Remote ON/OFF
5: 5VDC/±5VDC
3000: 3000mA
R: Neg. Remote ON/OFF
12: 12VDC/±12VDC
1500: ±1500mA
D: Without ON/OFF Pin
15: 15VDC/±15VDC
1300: 1300mA
G: Without ON/OFF & TRIM pin
24: 24VDC/±24VDC
1000: 1000mA
625: 625mA/±625mA
RF: Neg. Remote ON/OFF without TRIM pin
F: Pos. Remote ON/OFF without TRIM pin
500: ±500mA
315: ±315mA
COMPANY INFORMATION
Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development
engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008
certification is just one example of our commitment to producing a high quality, well-documented product for our customers.
Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely
with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide
ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your
future projects.
Contact Wall Industries for further information:
Phone:
Toll Free:
Fax:
E-mail:
Web:
Address:
1/9/2018
(603)778-2300
(888)597-9255
(603)778-9797
[email protected]
www.wallindustries.com
37 Industrial Drive
Exeter, NH 03833
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 11 of 11
Similar pages