7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION BY TYCO ELECTRONICS CORPORATION 6 5 4 3 2 20 LOC REVISIONS DIST GP ALL RIGHTS RESERVED. 1 00 P LTR A DESCRIPTION DATE RELEASD FOR PRODUCTION DWN APVD TX 29FEB2016 SH ( 73.16 ) EMI SPRING BRACKET CAGE ASSEMBLY D D 7 ( 27.75 ) ( 29.59 ) 25.22 0.25 ( 25.4 ) ( 1.2 ) TYP EMI GASKET ( 9.50 ) ( 12.08 ) 19.0 ( 2.3 ) TYP ( 2.0 ) TYP C ( 2.0 ) TYP ( 2.5 ) TYP CONTACT C HOUSING 1. MATERIALS: CAGE ASSEMBLY- NICKEL SILVER ALLOY PER ASTM B 122. BRACKET- STAINLESS STEEL. EMI SPRING- COPPER ALLOY, NICKEL PLATED. EMI GASKET- PLATED FILLED SILICONE WITH 94V-0. HOUSING- POLYESTER LCP WITH 94V-0. CHICKLET- POLYESTER LCP WITH 94V-0. CONTACT- COPPER ALLOY. LIGHTPIPE- POLYCARBONATE WITH 94V-0. B 2 3 CONTACT FINISH: 0.76µm GOLD ON MATING END, 1.25µm MATT TIN ON SOLDER TAIL, ALL OVER 1.27µm NICKEL. ( 24.05 ) 19.57 0.25 ( 19.85 ) CHICKLET B ( 3.55 ) DATUM AND BASIC DIMENSION ESTABLISHED BY CUSTOMER. 4. MINIMUM PCB THICKNESS OF 1.57. 5 THE ENTIRE AREA OF THE CONNECTOR FOOTPRINT, INDICATED BY THE DASHED LINE, TO BE CONSIDERED THE KEEPOUT AREA FOR COMPONENTS. 6 CROSS-HATCHED AREAS REPRESENT ZONES ON THE PCB THAT COME IN CONTACT WITH OR BE IN CLOSE PROXIMITY TO THE PLASTIC HOUSING OR THE CONNECTOR CAGE. INDICATED AREAS TO BE CONSIDERED TRACE FREE. 7 8 A 9 9 NO LIGHTPIPE 2198373-4 LEFT INDICATOR UP 9 2 2198373 -3 NO LIGHTPIPE 2198373 -1 LEFT INDICATOR UP 2 HATCHED AREA IS PLACEMENT ZONE FOR LED. LED SHOULD BE CENTERED WITHIN ZONE. RECOMMEND 0805 PACKAGE. CONTACT FINISH THIS DRAWING IS A CONTROLLED DOCUMENT. DIMENSIONING AND TOLERANCING PER ASME Y14.5M-2009 DIMENSIONS: mm SEE NOTE 1 TOLERANCES UNLESS OTHERWISE SPECIFIED: 0.25 0.15 - 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - 2198373-5 LEFT INDICATOR DOWN 2 MATERIAL 4805 (3/11) 2198373-6 9 PART NUMBER AND DATE CODE MARKED IN APPROXIMATE AREA SHOWN. CONTACT FINISH: 0.08µm MINIMUM GOLD OVER 0.68µm PALLADIUM-NICKEL ON MATING END, 1.25µm MATT TIN ON SOLDER TAIL, ALL OVER 1.27µm NICKEL. LEFT INDICATOR DOWN DESCRIPTION DWN 01NOV2011 CHK 01NOV2011 M.SHIRK D.SZCZESNY - APVD - NAME - APPLICATION SPEC - WEIGHT SIZE - CUSTOMER DRAWING PART NUMBER A TE Connectivity PRODUCT SPEC - 2198373 -2 CAGE AND CONNECTOR ASSEMBLY, WITH EMI GASKET, 2X1, ZQSFP+ STACKED CAGE CODE A1 00779 DRAWING NO 2198373 SCALE 4:1 SHEET RESTRICTED TO 1 OF - 4 REV A 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION BY TYCO ELECTRONICS CORPORATION 6 5 4 3 2 20 LOC 1 REVISIONS DIST ALL RIGHTS RESERVED. P LTR - DESCRIPTION DATE SEE SHEET 1 DWN APVD - - - D D 2198373-1 / 2198373-4 NO LIGHTPIPE IN ASSEMBLY C 2198373-2 / 2198373-5 LEFT LIGHTPIPE INDICATOR POINTING TO UPPER PORT 2198373-3 / 2198373-6 LEFT LIGHTPIPE INDICATOR POINTING TO LOWER PORT C LIGHTPIPE ( 4.65 ) 19.85 ( 0.81 ) HEIGHT OF LIGHT PIPE B B 25.51 SECTION SCALE 24.50 RECOMMENDED PANEL CUTOUT AND PC BOARD, PANEL POSITION A 0.19 BOTTOM OF CUTOUT IN PANEL TO TOP OF PC BOARD 1.57 ( 45.59 ) V-V 3:1 6.00 0.30 DISTANCE BETWEEN BACK OF PANEL AND FRONT OF PCB SECTION U-U A THIS DRAWING IS A CONTROLLED DOCUMENT. DIMENSIONING AND TOLERANCING PER ASME Y14.5M-2009 DIMENSIONS: mm MATERIAL SEE NOTE 1 4805 (3/11) MIN PCB TOLERANCES UNLESS OTHERWISE SPECIFIED: 0.25 0.15 - 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - DWN 01NOV2011 CHK 01NOV2011 M.SHIRK D.SZCZESNY TE Connectivity - APVD - NAME PRODUCT SPEC - APPLICATION SPEC - - WEIGHT SIZE - CUSTOMER DRAWING CAGE AND CONNECTOR ASSEMBLY, WITH EMI GASKET, 2X1, ZQSFP+ STACKED CAGE CODE A1 00779 DRAWING NO 2198373 SCALE 4:1 SHEET RESTRICTED TO 2 OF - 4 REV A 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION 6 5 4 3 2 20 LOC 1 REVISIONS DIST ALL RIGHTS RESERVED. BY TYCO ELECTRONICS CORPORATION P LTR D C 3X 60.95 2X 57.15 2X 53.15 2X 49.15 2X 44.30 4X 42.85 2X 37.70 19.00 8X 14.30 9.50 4X F SEE DETAIL 0.56 4.70 G SEE DETAIL 9X 9X 0.00 - 2.40 TYP 1.60 TYP 0.80 TYP 76X 0.37 DESCRIPTION DATE SEE SHEET 1 DWN APVD - - - 0.05 2.50 0.05 D 3X 4.00 2.50 0.05 C 1.40 TYP 0.70 E TYP 0.52 2X 2.50 27.00 0.05 4X 2X B 3X 4.375 D 9.00 2X 0.05 3.50 19.00 18.00 2X 0.81 38 1 0.00 37 36 2 3 35 34 DETAIL G SCALE 10:1 B UPPER PORT 4 5 4.65 A 9X 1.05 0.05 38 37 36 3 1.05 A LOWER PORT BSC 0.05 B C 35 34 3 RECOMMENDED PC BOARD LAYOUT COMPONENT SIDE OF BOARD SCALE 5:1 (PCB TOLERANCE: # 0.05) 1 2 3 4 5 A THIS DRAWING IS A CONTROLLED DOCUMENT. DIMENSIONING AND TOLERANCING PER ASME Y14.5M-2009 DIMENSIONS: DETAIL F SCALE 10:1 PIN ASSIGNMENTS mm MATERIAL SEE NOTE 1 4805 (3/11) TOLERANCES UNLESS OTHERWISE SPECIFIED: 0.25 0.15 - 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - DWN 01NOV2011 CHK 01NOV2011 M.SHIRK D.SZCZESNY TE Connectivity - APVD - NAME PRODUCT SPEC - APPLICATION SPEC - - WEIGHT SIZE - CUSTOMER DRAWING CAGE AND CONNECTOR ASSEMBLY, WITH EMI GASKET, 2X1, ZQSFP+ STACKED CAGE CODE A1 00779 DRAWING NO 2198373 SCALE 4:1 SHEET RESTRICTED TO 3 OF - 4 REV A 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION BY TYCO ELECTRONICS CORPORATION 6 5 4 3 2 20 LOC 1 REVISIONS DIST ALL RIGHTS RESERVED. P LTR - DESCRIPTION DATE SEE SHEET 1 DWN APVD - - - 15.24 7.10 4.80 1.78 1.98 2X 1.40 2X 1.28 6 D D 6 SEE DETAIL 2X 2.00 DETAIL H SCALE 10:1 H 2X 18.70 2X 1.00 2X ( 2.00 ) SEE DETAIL J 2X 3.30 C C 2X 2.60 8 2X 61.00 66.00 2X 1.40 5 5 DETAIL J LED PADS SCALE 10:1 32.35 0.30 SEE DETAIL TYP K 6 3.00 B 1.50 4.00 A ( 4.65 ) 6 B TYP B TYP 4X 4.00 6 3.15 4X 1.75 5 19.50 K DETAIL SCALE 10:1 KEEPOUT AREAS COMPONENT SIDE OF BOARD SCALE A 5:1 A THIS DRAWING IS A CONTROLLED DOCUMENT. DIMENSIONING AND TOLERANCING PER ASME Y14.5M-2009 DIMENSIONS: mm MATERIAL SEE NOTE 1 4805 (3/11) TOLERANCES UNLESS OTHERWISE SPECIFIED: 0.25 0.15 - 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - DWN 01NOV2011 CHK 01NOV2011 M.SHIRK D.SZCZESNY TE Connectivity - APVD - NAME PRODUCT SPEC - APPLICATION SPEC - - WEIGHT SIZE - CUSTOMER DRAWING CAGE AND CONNECTOR ASSEMBLY, WITH EMI GASKET, 2X1, ZQSFP+ STACKED CAGE CODE A1 00779 DRAWING NO 2198373 SCALE 4:1 SHEET RESTRICTED TO 4 OF - 4 REV A