Wall JFC48D15-10 10 watt dc/dc power converter Datasheet

JFC10 SERIES
10 Watt DC/DC Power Converters
Rev B
Wall Industries, Inc.
FEATURES
Size:
1.00 x 1.00 x 0.39 inches
(25.4 x 25.4 x 9.9 mm)
• High Efficiency up to 91%
• Built-in EN55022 Class B Filter
• Remote On/Off Control
• 10 Watts Maximum Output Power
• 2:1 Wide Input Voltage Ranges
• Short Circuit, Over Voltage, Over Load, & Under-Voltage Protection
• Six-Sided Continuous Shielding
• Wide Operating Temperature Range: -40°C to +85°C
• Ultra Low Quiescent Current
• Compliant to RoHS EU Directive 2011/65/EU
• No Minimum Load Requirements
• UL60950-1, EN60950-1, & IEC60950-1 Safety Approvals
• Single and Dual Outputs
• CE Mark meets 2006/95/EC, 2011/95/EC, and 2004/108/EC
• Fixed Switching Frequency
• Optional Heatsink Available (Suffix “HC”)
DESCRIPTION
Options:
• Negative Logic Remote ON/OFF
• Without Trim pin
• Without CTRL Pin
• Heatsink
The JFC10 series of DC/DC power converters provides 10 Watts of output power in an industry standard 1.00” x
1.00” x 0.39” package and footprint. This series has single and dual output models with 2:1 wide input voltage
ranges of 9-18VDC, 18-36VDC, and 36-75VDC. Some features include high efficiency up to 91%, 1600VDC I/O
isolation, six-sided shielding, and remote on/off control. These converters are also protected against short circuit,
over voltage, over load, and under-voltage. All models are RoHS compliant and have UL60950-1, EN60950-1, and
IEC60950-1 safety approvals. This series is best suited for use in wireless networks, telecom/datacom, industry
control systems, measurement equipment, and semiconductor equipment.
MODEL SELECTION TABLE
SINGLE OUTPUT MODELS
Model Number
Input Voltage Range
Output
Voltage
Output Current
Min Load
Max Load
Output
Ripple & Noise
No Load
Input Current
Output
Power
Efficiency
Maximum
Capacitive Load
JFC12S33-10
3.3 VDC
0mA
3000mA
40mVp-p
10mA
9.9W
83%
3500µF
JFC12S05-10
5 VDC
0mA
2000mA
40mVp-p
10mA
10W
86%
2500µF
12 VDC
0mA
830mA
60mVp-p
10mA
10W
89%
430µF
15 VDC
0mA
670mA
60mVp-p
10mA
10W
90%
350µF
JFC12S24-10
24 VDC
0mA
416mA
60mVp-p
10mA
10W
91%
125µF
JFC24S33-10
3.3 VDC
0mA
3000mA
40mVp-p
6mA
9.9W
85%
3500µF
5 VDC
0mA
2000mA
40mVp-p
6mA
10W
86%
2500µF
12 VDC
0mA
830mA
60mVp-p
6mA
10W
91%
430µF
15 VDC
0mA
670mA
60mVp-p
6mA
10W
90%
350µF
JFC24S24-10
24 VDC
0mA
416mA
60mVp-p
6mA
10W
91%
125µF
JFC48S33-10
3.3 VDC
0mA
3000mA
40mVp-p
4mA
9.9W
85%
3500µF
JFC48S05-10
5 VDC
0mA
2000mA
40mVp-p
4mA
10W
87%
2500µF
12 VDC
0mA
830mA
60mVp-p
4mA
10W
90%
430µF
15 VDC
0mA
670mA
60mVp-p
4mA
10W
90%
350µF
24 VDC
0mA
416mA
60mVp-p
4mA
10W
91%
125µF
JFC12S12-10
JFC12S15-10
JFC24S05-10
JFC24S12-10
JFC24S15-10
JFC48S12-10
JFC48S15-10
12 VDC
(9 – 18 VDC)
24 VDC
(18 – 36 VDC)
48 VDC
(36 – 75 VDC)
JFC48S24-10
DUAL OUTPUT MODELS
Model Number
JFC12D05-10
JFC12D12-10
JFC12D15-10
JFC24D05-10
JFC24D12-10
JFC24D15-10
JFC48D05-10
JFC48D12-10
JFC48D15-10
02/03/2014
Input Voltage Range
12 VDC
(9 – 18 VDC)
24 VDC
(18 – 36 VDC)
48 VDC
(36 – 75 VDC)
Output Current
Output
Voltage
Min Load
Max Load
Output
Ripple & Noise
No Load
Input Current
Output
Power
Efficiency
Maximum
Capacitive Load
±5 VDC
0mA
±1000mA
40mVp-p
10mA
10W
86%
±1440µF
±12 VDC
0mA
±416mA
60mVp-p
10mA
10W
89%
±250µF
±15 VDC
0mA
±333mA
60mVp-p
10mA
10W
90%
±180µF
±5 VDC
0mA
±1000mA
40mVp-p
6mA
10W
86%
±1440µF
±12 VDC
0mA
±416mA
60mVp-p
6mA
10W
90%
±250µF
±15 VDC
0mA
±333mA
60mVp-p
6mA
10W
90%
±180µF
±5 VDC
0mA
±1000mA
40mVp-p
4mA
10W
87%
±1440µF
±12 VDC
0mA
±416mA
60mVp-p
4mA
10W
91%
±250µF
±15 VDC
0mA
±333mA
60mVp-p
4mA
10W
90%
±180µF
Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 1 of 5
JFC10 SERIES
10 Watt DC/DC Power Converters
Rev B
Wall Industries, Inc.
SPECIFICATIONS: JFC10 SERIES
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
Typ
Max
9
18
36
12
24
48
18
36
75
9
18
36
Unit
INPUT SPECIFICATIONS
Input Voltage Range
Start-Up Voltage
Shutdown Voltage
Input Surge Voltage (1sec, max.)
Input Reflected Ripple Current
Input Current
OUTPUT SPECIFICATIONS
Output Voltage
Voltage Accuracy
Line Regulation
12VDC nominal input models
24VDC nominal input models
48VDC nominal input models
12VDC nominal input models
24VDC nominal input models
48VDC nominal input models
12VDC nominal input models
24VDC nominal input models
48VDC nominal input models
12VDC nominal input models
24VDC nominal input models
48VDC nominal input models
8
16
33
30
See Table
Low line to high line at full load
No load to full load
Load Regulation
10% load to 90% load
Single Output Models
Dual Output Models
Single Output Models
Dual Output Models
Single Output Models
Dual Output Models
Cross Regulation (Dual Output Models) Asymmetrical load 25% / 100% FL
Voltage Adjustability (See Note 1)
Single Output Models
Output Power
Rated
With Trim up 10%
With Trim up 20%
Output Current
Minimum Load
Maximum Capacitive Load
Ripple & Noise (20MHz BW)
Transient Response Recovery Time
Start-Up Time
Temperature Coefficient
PROTECTION
Short Circuit Protection
Over Load Protection
See Table
+1.0
+0.2
+0.5
+0.2
+1.0
+0.1
+0.8
+5.0
+10
+20
10
11
12
See Table
0
Minimum input and constant resistive load
With 10µF/25V X7R 1206 MLCC
With 10µF/25V X7R 1206 MLCC
With 1µF/50V X7R 1206 MLCC
With 10µF/25V X7R 1206 MLCC for each output
With 10µF/25V X7R 1206 MLCC for each output
25% load step change
3.3V & 5V Output Models
12V & 15V Output Models
24V Output Models
±5V Output Models
±12V & ±15V Output Models
Nom. input and constant resistive load
Power Up
Remote ON/OFF
-0.02
% of rated full load at nominal input
Over Voltage Protection
Zener diode clamp
GENERAL SPECIFICATIONS
Efficiency
Switching Frequency
Nominal input voltage and full load
3.3V & 5V Output Models
Isolation Voltage
1 minute
Isolation Resistance
Isolation Capacitance
500VDC
02/03/2014
3.3V & 12V Output Models
Others
-1.0
-0.2
-0.5
-0.2
-1.0
-0.1
-0.8
-5.0
-10
-10
3.3V Output Models
5V Output Models
12V Output Models
15V Output Models
24V Output Models
Input to Output
Input to Case
Output to Case
VDC
VDC
25
50
100
No Load
VDC
VDC
mAp-p
%
%
%
%
%
%
W
%
See Table
40
60
60
40
60
250
30
30
+0.02
mVp-p
µs
ms
%/°C
continuous, automatic recovery
150
%
3.7
5.4
6.3
7.4
VDC
13.5
19.6
18.3
22.0
29.1
32.5
297
1600
1000
1000
1
See Table
330
363
Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
kHz
VDC
1500
GΩ
pF
Page 2 of 5
JFC10 SERIES
10 Watt DC/DC Power Converters
Rev B
Wall Industries, Inc.
SPECIFICATIONS: JFC10 SERIES
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
Typ
Max
Unit
REMOTE ON/OFF (See Note 4)
Positive Logic (standard)
The CTRL pin is referenced to –Input pin
Negative Logic (optional)
The CTRL pin is referenced to –Input pin
Input Current of Remote Control Pin
Nominal Vin
Remote OFF State Input Current
Nominal Vin
DC/DC ON
Open or 3V < Vr < 15 VDC
DC/DC OFF
Short or 0V < Vr < 1.2 VDC
DC/DC ON
Short or 0V <Vr < 1.2 VDC
DC/DC OFF
Open or 3V < Vr < 15 VDC
-0.5
1.0
mA
2.5
mA
ENVIRONMENTAL SPECIFICATIONS
Operating Ambient Temperature
With derating
-40
Maximum Case Temperature
Storage Temperature
Thermal Impedance (See Note 6)
-55
Natural Convection
Without Heatsink
16.18
With Heatsink
15.13
Relative Humidity
+85
°C
+105
°C
+125
°C
5
Thermal Shock
°C/W
95
% RH
MIL-STD-810F
Vibration
MIL-STD-810F
MTBF
MIL-HDBK-217F Ta=25°C, full load
3,308,000 hours
PHYSICAL SPECIFICATIONS
Weight
0.58oz (16.5g)
Dimensions (L x W x H)
1.00x1.00x0.39 inch (25.4x25.4x9.9 mm)
Case Material
Copper
Base Material
FR4 PCB
Potting Material
Silicon (UL94-V0)
Shielding
Six-sided
SAFETY & EMC CHARACTERISTICS
Safety Approvals
UL60950-1, IEC60950-1, EN60950-1
EMI (See Note 3)
EN55022
Class A, Class B
ESD
EN61000-4-2
Radiated Immunity
EN61000-4-3
Air ±8kV
Contact ±6kV
10 V/m
Fast Transient (See Note 2)
EN61000-4-4
±2kV
Perf. Criteria A
Surge (See Note 2)
EN61000-4-5
±1kV
Perf. Criteria A
Conducted Immunity
EN61000-4-6
3 Vrms
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
NOTES
1. Trimming allows the user to increase or decrease the output voltage set point of the module. This is accomplished by connecting an external resistor
between the Trim pin and either the +Vout pin or the –Vout pin.
2. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor suggested is Nippon chemi-con KY
series, 220µF/100V.
3. The JFC10 series standard modules meet EN55022 Class A without external components and meet Class B with external components. For more details
please call factory.
4. Both positive logic and negative logic remote on/off control is available. Positive logic remote on/off comes standard; for negative logic remote on/off add
the suffix “R” to the model number (Ex: JFC24S05-10R).
5. There are several different options available for this series. Please see the “Model Number Setup” on page 5 for all options and ordering information.
6. Optional heatsink is available. Please call factory for more information.
CAUTION: This power module is not internally fused. An input line fuse must always be used.
02/03/2014
Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 3 of 5
JFC10 SERIES
10 Watt DC/DC Power Converters
Rev B
Wall Industries, Inc.
DERATING & EFFICIENCY CURVES
JFC48S05-10 Derating Curve
JFC48S05-10 Derating Curve with Heatsink
100
100
Output Power (%)
120
Output Power (%)
120
80
60
Natural Convection
100LFM
200LFM
300LFM
400LFM
500LFM
40
20
0
-40
-20
0
80
60
Natural Convection
100LFM
200LFM
300LFM
400LFM
500LFM
40
20
20
40
60
Ambient Temperature (°C)
80
100
0
-40
120
-20
93
89
89
85
85
81
77
73
69
36
20
40
60
Ambient Temperature (°C)
80
44
48
52
56
60
Input Voltage (VDC)
64
68
120
81
77
Vin= 36V
Vin= 48V
Vin= 75V
73
40
100
JFC48S05-10 Efficiency vs Output Load
93
Efficiency (%)
Efficiency (%)
JFC48S05-10 Efficiency vs Input Voltage
0
72
69
10
75
20
30
40
50
60
% of Full Load
70
80
100
90
MECHANICAL DRAWING
0.22 (5.6)
0.39 (9.9)
PIN CONNECTIONS
SIDE VIEW
DIA.
0.04 (1.0)
1.00 (25.4)
2
5
1
4
02/03/2014
3
BOTTOM
VIEW
0.200 (5.08)
6
0.100 (2.54)
0.400 (10.16)
0.400 (10.16)
0.500 (2.7)
1.00 (25.4)
0.800 (20.32)
PRODUCT OPTIONS
PIN
SINGLE
DUAL
1
+INPUT
+INPUT
2
-INPUT
-INPUT
3
CTRL
CTRL
4
+OUTPUT
5
TRIM
6
-OUTPUT
-OUTPUT
OPTION
SUFFIX
Positive Logic Remote On/Off
None
Negative Logic Remote On/Off
R
Without CTRL Pin
D
+OUTPUT
Without CTRL and TRIM Pins
G
COMMON
Positive Logic without TRIM Pin
F
Negative Logic without TRIM Pin
RF
Heatsink
HC
EXTERNAL OUTPUT TRIMMING
Output can be externally trimmed by using the
method shown below
NOTES
1. Unit: inches (mm)
2. Tolerance: X.XX±0.02 (X.X±0.5)
X.XXX±0.01 (X.XX±0.25)
5. All dimensions are for reference only
5
6
3. Pin Pitch Tolerance: ±0.01 (±0.25)
4. Pin Dimension Tolerance: ±0.004 (±0.1)
TRIM DOWN
TRIM UP
RD
RU
5
4
Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 4 of 5
JFC10 SERIES
10 Watt DC/DC Power Converters
Rev B
Wall Industries, Inc.
EMI CONSIDERATIONS
Suggested Schematic for EN55022 Conducted & Radiated Emissions
+Vin
+INPUT
+Vout
DC/DC
CONVERTER
C1
-Vin
-INPUT
Recommended Layout with Input Filter
LOAD
-Vout
Component
Value
Voltage
Reference
C1
10µF
25V
1812 MLCC
MODEL NUMBER SETUP
JFC
24
S
05
Series Name
Input Voltage
Output Quantity
S: Single Output
12: 9-18 VDC
-
10
R
H
Ouptut Voltage
Output Power
Remote ON/OFF, CTRL, and TRIM Pins
Heatsink
33: 3.3 VDC
10: 10 Watts
None: Positive Logic Remote On/Off
24: 18-36 VDC
05: 5 VDC
R: Negative Logic Remote On/Off
48: 36-75 VDC
12: 12 VDC
D: Without CTRL Pin
15: 15 VDC
G: Without CTRL and TRIM Pins
D: Dual Output
24: 24 VDC
F: Positive Logic without TRIM Pin
05: ±5 VDC
RF: Negative Logic without TRIM Pin
None: No Heatsink
HC: Heatsink
12: ±12 VDC
15: ±15 VDC
COMPANY INFORMATION
Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a
solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our
commitment to producing a high quality, well-documented product for our customers.
Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to
ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and
beyond the design and production phases. Give us a call today to discuss your future projects.
Contact Wall Industries for further information:
Phone:
Toll Free:
Fax:
E-mail:
Web:
Address:
02/03/2014
(603)778-2300
(888)597-9255
(603)778-9797
[email protected]
www.wallindustries.com
5 Watson Brook Road
Exeter, NH 03833
Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 5 of 5
Similar pages