SAW Components SAW duplexer Band III Series/type: Ordering code: B8088 B39182B8088P810 Date: Version: August 05, 2013 2.4 EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company. SAW Components B8088 1747.5 / 1842.5 MHz SAW duplexer Data Sheet Application ■ Low-loss SAW duplexer for mobile telephone Band III systems Low insertion attenuation Low amplitude ripple Usable passband 75 MHz Single ended to balanced transformation in Antenna - Rx path ■ Impedance transformation 50Ω to 100Ω in Antenna - Rx path ■ high Tx - Rx isolation ■ ■ ■ ■ 0.43 0.33 1 Package size 2.0 x 1.6 Component height 0.45 mm max. RoHS compatible Approximate weight 0.006 g Package for Surface Mount Technology (SMT) ■ Ni, gold-plated terminals ■ Electrostatic Sensitive Device (ESD) ■ Moisture Sensitive Level 3 ■ ■ ■ ■ ■ 2 3 0.35 Features 4 7 6 5 0.45 max. 0.7 bottom view 0.29 8 0.29 9 side view 2.0 ■ ■ ■ ■ ■ 1,8 3 6 2, 4, 5 7, 9 5 4 1 Pin configuration 6 8 1.6 7 2 3 3 1 RX Output (balanced) TX Input (single ended) Antenna To be grounded To be grounded 8 4,5,9 2,7 6 Please read cautions and warnings and important notes at the end of this document. 2 August 05, 2013 top view SAW Components B8088 1747.5 / 1842.5 MHz SAW duplexer Data Sheet Characteristics Temperature range for specification: ANT terminating impedance: RX terminating impedance: TX terminating impedance: T = –20 ˚C to +85 ˚C ZANT = 50 Ω || 3.9nH. ZRX = 100 Ω (balanced)|| 12nH. ZTX = 50 Ω Characteristics TX-ANT min. Center frequency fC Maximum insertion attenuation 1714.0 ... 1781.0 – typ. @ 25˚C 1747.5 max. – MHz αmax MHz 2.0 3.0 dB MHz 2.5 4.0 dB Amplitude ripple per 5MHz channel ∆α 1710.0 ... 1785.0 MHz 0.55 1.3 dB VSWR TX port 1710.0 ... 1785.0 1710.0 ... 1785.0 MHz 1.5 2.0 ANT port 1710.0 ... 1785.0 MHz 1.5 2.0 α Attenuation 10.0 ... 1565.42 MHz 207.5 ... 222.0 MHz 470.0 ... 770.0 MHz 1565.42 ... 1573.374MHz 1573.374... 1577.466MHz 1577.466... 1585.42 MHz 1597.5515...1605.886MHz 1605.886... 1680.0 MHz 1805.0 ... 1880.0 MHz 1920.0 ... 1980.0 MHz 2110.0 ... 2170.0 MHz 2400.0 ... 2500.0 MHz 2620.0 ... 2690.0 MHz 3420.0 ... 3570.0 MHz 5130.0 ... 5355.0 MHz 5725.0 ... 5850.0 MHz Please read cautions and warnings and important notes at the end of this document. 30 50 35 40 42 40 35 20 43 20 27 30 27 20 15 15 3 33 62 40 46 47 44 39 30 47 33 41 34 31 25 20 20 August 05, 2013 dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB SAW Components B8088 1747.5 / 1842.5 MHz SAW duplexer Data Sheet Characteristics Temperature range for specification: ANT terminating impedance: RX terminating impedance: TX terminating impedance: T = –20 ˚C to +85 ˚C ZANT = 50 Ω || 3.9nH. ZRX = 100 Ω (balanced)|| 12nH. ZTX = 50 Ω Characteristics ANT-RX min. Center frequency fC Maximum insertion attenuation 1805.0 ... 1880.0 – typ. @ 25˚C 1842.5 max. – αmax MHz Amplitude ripple per 5MHz channel ∆α 1805.0 ... 1880.0 MHz 3.0 4.3 dB 0.65 1.7 dB Common mode rejection ratio 1805.0 ... 1880.0 MHz VSWR RX port 1805.0 ... 1880.0 MHz 1.6 2.0 ANT port 1805.0 ... 1880.0 MHz 1.6 2.0 10.0 1710.0 1965.0 2400.0 2484.0 ... ... ... ... ... MHz MHz MHz MHz MHz 1710.0 1785.0 2400.0 2484.0 5650.0 IMD Product Level Limits2) at fTX=1747.5MHz, fRX=1842.5MHz Blocker 1 95.0 Blocker 2 1652.5 Blocker 3 3590.0 Blocker 4 5337.5 2) 231) 25 dB α Attenuation 1) MHz 35 45 15 30 30 58 54 58 60 52 dB dB dB dB dB α MHz MHz MHz MHz -115 -114 -110 -116 dBm dBm dBm dBm A combination of 10˚ phase balance and 1 dB amplitude balance corresponds to 19.6 dB CMRR IMD product level limits for power levels PTX=21dBm (antenna port output power) and PBlocker= 15dBm (antenna port input power) Please read cautions and warnings and important notes at the end of this document. 4 August 05, 2013 SAW Components B8088 1747.5 / 1842.5 MHz SAW duplexer Data Sheet Characteristics Temperature range for specification: ANT terminating impedance: RX terminating impedance: TX terminating impedance: T = –20 ˚C to +85 ˚C ZANT = 50 Ω || 3.9nH. ZRX = 100 Ω (balanced)|| 12nH. ZTX = 50 Ω Characteristics TX-RX Differential Mode Isolation 1710.0 ... 1785.0 min. typ. @ 25˚C 58 53 dB 57 dB α MHz ... 1880.0 MHz 53 50 Common Mode Isolation 1710.0 ... 1785.0 MHz 50 1805.0 max. Please read cautions and warnings and important notes at the end of this document. 5 August 05, 2013 dB SAW Components B8088 1747.5 / 1842.5 MHz SAW duplexer Data Sheet Characteristics Temperature range for specification: ANT terminating impedance: RX terminating impedance: TX terminating impedance: T = 25 ˚C ZANT = 50 Ω || 3.9nH. ZRX = 100 Ω (balanced)|| 12nH. ZTX = 50 Ω Characteristics TX-ANT min. Center frequency fC Maximum insertion attenuation 1714.0 ... 1781.0 – typ. @ 25˚C 1747.5 max. – MHz αmax MHz 2.0 2.4 dB MHz 2.5 2.6 dB Amplitude ripple per 5MHz channel ∆α 1710.0 ... 1785.0 MHz 0.55 1.3 dB VSWR TX port 1710.0 ... 1785.0 1710.0 ... 1785.0 MHz 1.5 2.0 ANT port 1710.0 ... 1785.0 MHz 1.5 2.0 α Attenuation 10.0 ... 1565.42 MHz 207.5 ... 222.0 MHz 470.0 ... 770.0 MHz 1565.42 ... 1573.374MHz 1573.374... 1577.466MHz 1577.466... 1585.42 MHz 1597.5515...1605.886MHz 1605.886... 1680.0 MHz 1805.0 ... 1880.0 MHz 1920.0 ... 1980.0 MHz 2110.0 ... 2170.0 MHz 2400.0 ... 2500.0 MHz 2620.0 ... 2690.0 MHz 3420.0 ... 3570.0 MHz 5130.0 ... 5355.0 MHz 5725.0 ... 5850.0 MHz Please read cautions and warnings and important notes at the end of this document. 30 50 35 40 42 40 35 20 43 20 27 30 27 20 15 15 6 33 62 40 46 47 44 39 30 47 33 41 34 31 25 20 20 August 05, 2013 dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB SAW Components B8088 1747.5 / 1842.5 MHz SAW duplexer Data Sheet Characteristics Temperature range for specification: ANT terminating impedance: RX terminating impedance: TX terminating impedance: T = 25 ˚C ZANT = 50 Ω || 3.9nH. ZRX = 100 Ω (balanced)|| 12nH. ZTX = 50 Ω Characteristics ANT-RX min. Center frequency fC Maximum insertion attenuation 1805.0 ... 1880.0 – typ. @ 25˚C 1842.5 max. – αmax MHz Amplitude ripple per 5MHz channel ∆α 1805.0 ... 1880.0 MHz 3.0 3.3 dB 0.65 1.6 dB Common mode rejection ratio 1805.0 ... 1880.0 MHz VSWR RX port 1805.0 ... 1880.0 MHz 1.6 2.0 ANT port 1805.0 ... 1880.0 MHz 1.6 2.0 10.0 1710.0 1965.0 2400.0 2484.0 ... ... ... ... ... MHz MHz MHz MHz MHz 1710.0 1785.0 2400.0 2484.0 5650.0 IMD Product Level Limits2) at fTX=1747.5MHz, fRX=1842.5MHz Blocker 1 95.0 Blocker 2 1652.5 Blocker 3 3590.0 Blocker 4 5337.5 2) 231) 25 dB α Attenuation 1) MHz 35 46 15 30 30 58 54 58 60 52 dB dB dB dB dB α MHz MHz MHz MHz -115 -114 -110 -116 dBm dBm dBm dBm A combination of 10˚ phase balance and 1 dB amplitude balance corresponds to 19.6 dB CMRR IMD product level limits for power levels PTX=21dBm (antenna port output power) and PBlocker= 15dBm (antenna port input power) Please read cautions and warnings and important notes at the end of this document. 7 August 05, 2013 SAW Components B8088 1747.5 / 1842.5 MHz SAW duplexer Data Sheet Characteristics Temperature range for specification: ANT terminating impedance: RX terminating impedance: TX terminating impedance: T = 25 ˚C ZANT = 50 Ω || 3.9nH. ZRX = 100 Ω (balanced)|| 12nH. ZTX = 50 Ω Characteristics TX-RX Differential Mode Isolation 1710.0 ... 1785.0 min. typ. @ 25˚C 58 53 dB 57 dB α MHz ... 1880.0 MHz 53 50 Common Mode Isolation 1710.0 ... 1785.0 MHz 50 1805.0 max. Please read cautions and warnings and important notes at the end of this document. 8 August 05, 2013 dB SAW Components B8088 1747.5 / 1842.5 MHz SAW duplexer Data Sheet Maximum ratings Storage temperature range Tstg DC voltage VDC 5 V VESD VESD PIN 501) V V ESD voltage Input Power at 1710.0 ... 1785.0 MHz elsewhere –40 / +85 ˚C 3002) 29 10 dBm dBm machine model, 10 pulses human body model, 1 pulse } 1) acc. to JESD22-A115B (machine model), 10 negative & 10 positive pulses. 2) acc. to JESD22-A114F (human body model), 1 negative & 1 positive pulse. Please read cautions and warnings and important notes at the end of this document. 9 August 05, 2013 continuous wave T = 55˚C, 5.000 h SAW Components B8088 1747.5 / 1842.5 MHz SAW duplexer Data Sheet Frequency Response TX-ANT Frequency Response TX-ANT (wideband) Please read cautions and warnings and important notes at the end of this document. 10 August 05, 2013 SAW Components B8088 1747.5 / 1842.5 MHz SAW duplexer Data Sheet Frequency Response RX-ANT Frequency Response RX-ANT (wideband) Please read cautions and warnings and important notes at the end of this document. 11 August 05, 2013 SAW Components B8088 1747.5 / 1842.5 MHz SAW duplexer Data Sheet Frequency Response TX-RX (differential mode) Frequency Response TX-RX (differential mode, wideband) Please read cautions and warnings and important notes at the end of this document. 12 August 05, 2013 SAW Components B8088 1747.5 / 1842.5 MHz SAW duplexer Data Sheet Frequency Response TX-RX (common mode) Frequency Response Common Mode Rejection Ration Please read cautions and warnings and important notes at the end of this document. 13 August 05, 2013 SAW Components B8088 1747.5 / 1842.5 MHz SAW duplexer Data Sheet VSWR at TX-, RX- and Antenna Please read cautions and warnings and important notes at the end of this document. 14 August 05, 2013 SAW Components B8088 1747.5 / 1842.5 MHz SAW duplexer Data Sheet References Type B8088 Ordering code B39182B8088P810 Marking and Package C61157-A8-A64 Packaging F61074-V8247-Z0000 Date Codes L_1126 S-Parameters B8088_NB_UN.s4p, B8088_WB_UN.s4p See file header for pin/port assignment. Soldering profile S_6001 RoHS compatible defined as compatible with the following documents: "DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2005/618/EC from April 18th, 2005, amending Directive 2002/95/EC of the European Parliament and of the Council for the purposes of establishing the maximum concentration values for certain hazardous substances in electrical and electronic equipment." Moldability Before using in overmolding environment, please contact your EPCOS sales office. Matching coils See Inductor pdf-catalog http://www.tdk.co.jp/tefe02/coil.htm#aname1 and Data Library for circuit simulation http://www.tdk.co.jp/etvcl/index.htm For further information please contact your local EPCOS sales office or visit our webpage at www.epcos.com . Published by EPCOS AG Systems, Acoustics, Waves Business Group P.O. Box 80 17 09, 81617 Munich, GERMANY EPCOS AG 2013. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. Please read cautions and warnings and important notes at the end of this document. 15 August 05, 2013 Important notes The The following following applies applies to to all all products products named named in in this this publication: publication: The following applies to all products named in this publication: 1. 1. Some Some parts parts of of this this publication publication contain contain statements statements about about the the suitability suitability of of our our products products for for certain areas of application. These statements are based on our knowledge 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of of typical typical requirements often on products the areas of concerned. We certain areasthat of are application. These statements are our knowledge of typical requirements that are often placed placed on our our products in in thebased areas on of application application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements the of products for nevertheless expressly point out that such statements cannot becustomer regarded application. as binding statements about about the suitability suitability of our our products for a a particular particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar familiar with them than customers themselves. For reasons, itit is ultimately As is either unfamiliar with individual customer applications or less familiar witha rule, them EPCOS than the the customers themselves. For these these reasons, is always always ultimately incumbent on to and whether an product with with them than customers themselves. For these reasons, it is always incumbent on the thethecustomer customer to check check and decide decide whether an EPCOS EPCOS productultimately with the the properties described in the product specification is suitable for use in a particular customer incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. properties application.described in the product specification is suitable for use in a particular customer 2. application. 2. We We also also point point out out that that in in individual individual cases, cases, a a malfunction malfunction of of electronic electronic components components or or failure before the end of their usual service life cannot be completely ruled 2. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out out in in the the current state art, they are as In failure thethe end ofeven their if life cannot be completely ruledapplications out in the currentbefore state of of the art, even ifusual they service are operated operated as specified. specified. In customer customer applications requiring a very high level of operational safety and especially in customer applications current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in in which or of component could endanger human or requiring very high level of operational safety and especially in customer which the theamalfunction malfunction or failure failure of an an electronic electronic component could endangerapplications human life life in or health (e.g. in must ensured which failure of or an life-saving electronic systems), componentitit could endangerbe human life by or health the (e.g.malfunction in accident accidentorprevention prevention or life-saving systems), must therefore therefore be ensured by means of suitable design of the customer application or other action taken by the customer health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. protective circuitry or that no damage is means of suitableof of the customer application or other actionor by the customer (e.g. installation installation ofdesign protective circuitry or redundancy) redundancy) that no injury injury ortaken damage is sustained sustained by third parties in the event of malfunction or failure of an electronic component. (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. The warnings, cautions product-specific notes must be third parties in the eventand of malfunction or failure of an electronic component. 3. by The warnings, cautions and product-specific notes must be observed. observed. 4. In order to satisfy certain technical requirements, some of the products 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described described in in this this publication may contain substances subject to restrictions in certain jurisdictions 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. (e.g. because are classed as Useful information this be our publication may contain substances subject to restrictions inon certain jurisdictions because they they are classed as hazardous). hazardous). Useful information on this will will be found found in in(e.g. our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales Material Sheets on the Internet Should you have any more detailed Data questions, please contact our(www.epcos.com/material). sales offices. offices. 5. We constantly strive to improve our products. Consequently, the products detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described described in in this this publication may change from time to time. The same is true of the corresponding product 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore what extent product and publication may change from time toto same is truedescriptions of the corresponding product specifications. Please check therefore totime. whatThe extent product descriptions and specifications specifications contained in this publication are still applicable before or when you place an order. specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We the to production and Consecontained in this publication still applicable before or when you placeof order. We also also reserve reserve the right right are to discontinue discontinue production and delivery delivery ofanproducts. products. Consequently, we cannot guarantee that all products named in this publication will always We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be be available. The aforementioned apply case of agreements deviating quently, cannot guarantee does that not all products named this publication will always be available.we The aforementioned does not apply in in the the case in of individual individual agreements deviating from for products. available. The aforementioned does not apply in the case of individual agreements deviating from the the foregoing foregoing for customer-specific customer-specific products. 6. Unless otherwise agreed in individual contracts, from the foregoing for customer-specific products. 6. Unless otherwise agreed in individual contracts, all all orders orders are are subject subject to to the the current current version of the “General Terms of Delivery for Products and Services in the 6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Electrical Industry” by the Electrical and Industry Association version of published the “General of Delivery for Products and Services in the Electrical Industry” published by Terms the German German Electrical and Electronics Electronics Industry Association (ZVEI). Industry” published by the German Electrical and Electronics Industry Association (ZVEI). 7. The 7. (ZVEI). The trade trade names names EPCOS, EPCOS, BAOKE, BAOKE, Alu-X, Alu-X, CeraDiode, CeraDiode, CeraLink, CeraLink, CeraPlas, CeraPlas, CSMP, CSMP, CSSP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, 7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CeraPlas, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MKK, MLSC, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, CTVS, DeltaCap, FilterCap, FormFit, MiniBlue, MKD, MKK, MLSC, MotorCap, PCC, DigiSiMic, PhaseCap,DSSP, PhaseCube, PhaseMod, PhiCap, MiniCell, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are registered or in and in countries. Further SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5K, ThermoFuse, WindCap are trademarks trademarks registered or pending pending in Europe Europe andSIP5D, in other other countries. Further information information will be found on the Internet at www.epcos.com/trademarks. are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. will be found on the Internet at www.epcos.com/trademarks. 16 August 05, 2013