Abracon ASPI-2010-R68 Wire wound magnetically shielded smd power inductor Datasheet

Wire Wound Magnetically Shielded SMD Power Inductor
ASPI-2010 series
Pb
ASPI-2010
RoHS/RoHS II Compliant
2.0 x 1.6 x 1.0 mm
FEATURES:
APPLICATIONS:
•
•
•
•
•
• Mobile phones
• MP3 & 4 and other portable communication equipment
• Digital cameras.
Small size and low profile: 1.0mm
Small DCR and high rated current
High reliability to mechanical stress
Magnetically shielded by magnetic powder molding
Suitable for RoHS reflow profile
ELECTRICAL SPECIFICATIONS:
ASPI-2010 Series
-40˚C ~ +125˚C (including self heating)
-10˚C ~ +40˚C and 70% R.H. max.
Abracon P/N:
Operating Temperature & Humidity :
Storage Temperature & Humidity:
Part Number
ASPI-2010Inductance
Code
Inductance
L Tolerance
DC Resistance
Typ
DC Resistance
Max
Saturation
Current Typ
Saturation
Current Max
Temperature
Rise Current
Typ
Temperature
Rise Current
Max
Units
μH
−
Ω Typ
Ω Max
A Typ
A Max
A Typ
A Max
Symbol
L
M
ASPI-2010-R47
0.47
M
0.049
0.059
2.30
2.85
2.35
2.60
ASPI-2010-R68
0.68
M
0.063
0.076
1.95
2.45
2.05
2.25
ASPI-2010-1R0
1.0
M
0.095
0.114
1.65
1.85
1.45
1.60
ASPI-2010-1R5
1.5
M
0.145
0.174
1.35
1.65
1.25
1.40
ASPI-2010-2R2
2.2
M
0.220
0.264
1.20
1.45
1.10
1.20
ASPI-2010-3R3
3.3
M
0.279
0.335
0.90
1.05
0.88
0.98
ASPI-2010-4R7
4.7
M
0.399
0.479
0.70
0.85
0.74
0.82
ASPI-2010-6R8
6.8
M
0.680
0.816
0.60
0.70
0.52
0.58
DCR
Isat
Irms
Test Conditions:
a. Ambient Temperature: 20± 15oC
b. Relative Humidity: 65%±20%
c. Air Pressure: 86KPa to 106KPa
Inductance (L): WK3260B LCR meter or equivalent, 1MHz
Direct Current Resistance (DCR): HIOKI 3540 or equivalent
Saturation Current (Isat): WK3260B LCR meter or equivalent
Isat: Based on inductance change (∆ L/Lo ≈ -30%)
Temperature rise current (Irms): Electric Power, Electric current meter, Thermometer
Irms: Based on temperature rise (∆ T : 40 oC TYP. )
ABRACON IS
ISO9001:2008
CE RTIFIED
Revised: 02.20.13
Visit www.abracon.com for Terms & Conditions of Sale
30332 E speranza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001| www.abracon.com
Wire Wound Magnetically Shielded SMD Power Inductor
ASPI-2010 series
RoHS/RoHS II Compliant
Pb
ASPI-2010
2.0 x 1.6 x 1.0 mm
ELECTRICAL CHARACTERISTICS CURVES
PART IDENTIFICATION:
ASPI-2010-
-
Tolerance
M: ±20%
Inductance Code
Please refer to the
table above
Packaging
T: Tape and Reel
(2kpcs / reel)
OUTLINE DIMENSION:
Recommended Land Pattern
A
B
C Max.
D
E
F
a Typ.
b Typ.
c Typ.
2.0±0.2
1.6±0.2
1.0
1.2±0.2
0.60±0.2
0.80±0.2
0.70
0.70
1.70
Dimensions: mm
ABRACON IS
ISO9001:2008
CE RTIFIED
Revised: 02.20.13
Visit www.abracon.com for Terms & Conditions of Sale
30332 E speranza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001| www.abracon.com
Wire Wound Magnetically Shielded SMD Power Inductor
ASPI-2010 series
Pb
ASPI-2010
RoHS/RoHS II Compliant
2.0 x 1.6 x 1.0 mm
MATERIAL:
No
Components
Material
1
Ferrite Core
2
Wire
3
Magnetic Glue
4
Plating Electrodes
Plating: Ag/Ni/Sn
5
Outer Electrodes
Top surface solder coating:
Sn96.5%/Ag3%/Cu0.5%
Ni-Zn Ferrite
Polyurethane System enameled copper
wire
Epoxy resin and magnetic powder
OUTLINE PROFILE:
DIMENSION:
REFLOW
∆ Preheat condition: 150 ~200˚C /60~120sec.
∆ Allowed time above 217˚C: 60~90sec.
∆ Max temp: 260˚C
∆ Max time at max temp: 5sec.
∆ Solder paste: Sn/3.0Ag/0.5Cu
∆ Allowed Reflow time: 2x max
ABRACON IS
ISO9001:2008
CE RTIFIED
Revised: 02.20.13
Visit www.abracon.com for Terms & Conditions of Sale
30332 E speranza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001| www.abracon.com
Wire Wound Magnetically Shielded SMD Power Inductor
ASPI-2010 series
ASPI-2010
RoHS/RoHS II Compliant
Pb
2.0 x 1.6 x 1.0 mm
TAPE & REEL:
T: 2,000pcs / reel
Ao
Bo
W
E
F
Po
P1
1.90±0.05
2.20±0.05
8.0±0.1
1.75±0.1
3.5±0.05
4.0±0.1
4.0±0.1
P2
2.0±0.05
Do
T
K
1.5+0.1/-0.0
0.25±0.02
1.20±0.05
Storage Conditions
a.
b.
c.
d.
To maintain the solderability of terminal electrodes and to keep the packing material in good condition, temperature and
humidity in the storage area should be controlled.
Recommended conditions: -10oC ~ +40 oC, 70% RH (Max.)
Even under ideal storage conditions, solderability of products electrodes may decrease as time passes. For this reason, product
should be used within one year from the time of delivery.
In case of storage over 6 months, solderability shall be checked before actual usage.
Dimension: mm
ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications.
Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component
failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from
Abracon Corporation is required. Please contact Abracon Corporation for more information.
ABRACON IS
ISO9001:2008
CE RTIFIED
Revised: 02.20.13
Visit www.abracon.com for Terms & Conditions of Sale
30332 E speranza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001| www.abracon.com
Similar pages