IR7184SPBF 700V Half-Bridge Driver Features Product Summary Drives IGBT/MOSFET power devices Gate drive supplies up to 20V per channel Integrated deadtime protection Shoot-through (cross-conduction) protection Undervoltage lockout for VCC and for VBS 3.3V, 5V , 15V input logic compatible Tolerant to negative transient voltage Designed for use with bootstrap power supplies Matched propagation delays -40°C to 125°C operating range RoHS compliant Lead-Free Description ≤ 700V VOUT 10V – 20V Io+ & I o- (typ.) 1.9A / 2.3A tON & tOFF (typ.) 680ns & 270ns Deadtime (typ.) 400ns Package Options The IR7184S is a high voltage, high speed, power MOSFET and IGBT gate driver with high-side and low-side referenced output channel. This IC is designed to be used with low-cost bootstrap power supplies. Proprietary HVIC and latch immune CMOS technologies have been implemented in a rugged monolithic structure. The floating logic input is compatible with standard CMOS or LSTTL outputs (down to 3.3V logic). The output drivers feature a high-pulse current buffer stage designed for minimum driver cross-conduction. Shoot-through protection circuitry and a minimum deadtime circuitry have been integrated into this IC. Propagation delays are matched to simplify the HVIC’s use in high frequency applications. The floating channels can be used to drive N-channel power MOSFETs or IGBTs in the high-side configuration, which operate up to 700V. Base Part Number VOFFSET 8-Lead SOIC Typical Applications Appliance motor drives Servo drives Micro inverter drives General purpose three phase inverters Standard Pack Package Type Form Quantity IR7184SPBF SO8N Tube 95 IR7184SPBF SO8N Tape and Reel 2500 1 www.irf.com © 2015 International Rectifier Orderable Part Number IR7184SPBF IR7184STRPBF June 18, 2015 IR7184SPBF Typical Connection Diagram Up to 700V VCC VCC VB IN IN HO SD SD VS COM LO To Load (Refer to Lead Assignments for correct pin configuration). This diagram shows electrical connections only. Please refer tour Application Notes & DesignTips for proper circuit board layout. 2 www.irf.com © 2015 International Rectifier June 18, 2015 IR7184SPBF Absolute Maximum Ratings Absolute maximum ratings indicate sustained limits beyond which damage to the device may occur. All voltage parameters are absolute voltages referenced to COM unless otherwise stated in the table. The thermal resistance and power dissipation ratings are measured under board mounted and still air conditions. Symbol Definition Min. Max. VCC Low side and logic fixed supply voltage -0.3 25 Units VIN Logic input voltage (SD ¯¯ & IN) COM - 0.3 COM + 5.2 VB High side floating absolute voltage -0.3 725 † VS High side floating supply offset voltage VB- 25 VB + 0.3 VHO High side floating output voltage VS - 0.3 VB + 0.3 VLO Low side output voltage COM - 0.3 VCC + 0.3 VCC - 25 VCC + 0.3 V COM Power ground dVS/dt Allowable offset supply voltage transient — 50 V/ns Package power dissipation @ TA +25ºC — 0.625 W ºC/W PD Thermal resistance, junction to ambient — 200 TJ Junction temperature — 150 TS Storage temperature -55 150 TL Lead temperature (soldering, 10 seconds) — 300 RthJA † ºC All supplies are tested at 25V. Recommended Operating Conditions For proper operation, the device should be used within the recommended conditions. All voltage parameters are absolute voltages referenced to COM unless otherwise stated in the table. The offset rating is tested with supplies of (V CC - COM) = (VB - VS) = 15V. Symbol Min Max VCC Low-side supply voltage Definition 10 20 VIN IN, SD ¯¯ input voltage 0 5 VB High-side floating well supply voltage VS High-side floating well supply offset voltage VHO Floating gate drive output voltage VLO Low-side output voltage COM TA † VS + 10 † COM - 5 Units †† VS + 20 † 700 Vs VB COM VCC Power ground -5 5 Ambient temperature -40 125 V ºC Logic operation for VS of –8V to 600V. Logic state held for VS of –5 V to –VBS. Please refer to Design Tip DT97-3 for more details. IN and /SD are internally clamped with a 5.2V zener diode. †† 3 www.irf.com © 2015 International Rectifier June 18, 2015 IR7184SPBF Static Electrical Characteristics (VCC - COM) = (VB - VS) = 15V. TA = 25°C unless otherwise specified. The VIN and IIN parameters are referenced to COM. The VO and IO parameters are referenced to respective VS and COM and are applicable to the respective output leads HO or LO. The VCCUV parameters are referenced to COM. The VBSUV parameters are referenced to VS. Symbol Min. Typ. Max. VCCUV+ Definition VCC supply undervoltage positive going threshold 8 8.9 9.8 VCCUV- VCC supply undervoltage negative going threshold 7.4 8.2 9 VCC supply undervoltage hysteresis 0.3 0.7 — VBSUV+ VBS supply undervoltage positive going threshold 8 8.9 9.8 VBSUV- VBS supply undervoltage negative going threshold 7.4 8.2 9 VCCUVHY VBS supply undervoltage hysteresis 0.3 0.7 — ILK High-side floating well offset supply leakage — — 50 VBSUVHY IQBS Quiescent VBS supply current — 60 150 IQCC Quiescent VCC supply current — 1000 1600 VOH High level output voltage drop, VBIAS-VO — — 1.8 VOL Low level output voltage drop, VO — — 0.3 Io+ Output high short circuit pulsed current 1.4 1.9 — Units V VB = VS = 700V µA Output low short circuit pulsed current 1.8 2.3 VIH Logic “1” input voltage 2.7 — — VIL Logic “0” input voltage — — 0.8 VSD,TH+ Logic “1” input voltage 2.7 — — VSD, TH- Logic “0” input voltage — — 0.8 IIN+ Input bias current (HO = High) — 25 60 IIN- Input bias current (HO = Low) — — 1 VIN = 0V, VIN = 5V V IO = 0A A VO = 0V, PW ≤ 10µs VO = 15V,, PW ≤ 10µs — Io- Test Conditions V µA VIN = 5V, VSD = 0V VIN = 0V , VSD = 5V Dynamic Electrical Characteristics o VCC= VB = 15V, VS = COM, TA = 25 C, and CL = 1000pF unless otherwise specified. Symbol Min. Typ. tON Turn-on propagation delay — 680 900 VS = 0V tOFF Turn-off propagation delay — 270 400 VS = 0V or 700V Turn-on rise time — 40 60 Turn-off fall time — 20 35 Delay matching, HS & LS turn-on — 0 90 tR tF MTON Definition Max. Delay matching, HS & LS turn-off — 0 50 tSD Shut-down propagation delay — 80 270 DT Deadtime 280 400 520 — — 50 MTOFF MDT 4 Deadtime matching time www.irf.com © 2015 International Rectifier Units Test Conditions VS = 0V ns June 18, 2015 IR7184SPBF Functional Block Diagram VB UV DETECT HO R HV LEVEL SHIFTER VSS/COM LEVEL SHIFT IN R PULSE FILTER Q S VS PULSE GENERATOR DEAD TIME VCC +5V UV DETECT LO VSS/COM LEVEL SHIFT SD 5 www.irf.com © 2015 International Rectifier DELAY COM June 18, 2015 IR7184SPBF Lead Definitions Symbol VCC Description Low-side and logic supply voltage VB High-side gate drive floating supply VS High voltage floating supply return IN Logic inputs for high-side and low-side gate driver outputs /SD Logic inputs for shut-down HO High-side driver output LO Low-side driver output COM Low-side gate drive return Lead Assignments IN 1 8 VB SD 2 7 HO COM 3 6 VS LO 4 5 VCC 8-Lead SOIC 6 www.irf.com © 2015 International Rectifier June 18, 2015 IR7184SPBF Application Information and Additional Details IN (LO) IN 50% 50% SD IN (HO) toff tr tf ton 90% HO 90% LO HO LO 10% 10% Figure X. Switching Timing Waveform Diagram Figure 1. Input/Output Timing Diagram SD Figure 2. Switching Time Waveform Definitions 50% 50% 50% IN 90% tsd 10% 90% HO LO HO LO DT DT 90% 10% Figure 3. Shutdown Waveform Definitions Figure 4. Deadtime Waveform Definitions IN(LO) 50% 50% IN(HO) LO HO 10% MT MT 90% LO HO Figure X. Delay Matching Waveform Figure 5. Delay Matching Waveform Definitions 7 www.irf.com © 2015 International Rectifier June 18, 2015 IR7184SPBF Package Details 8 www.irf.com © 2015 International Rectifier June 18, 2015 IR7184SPBF Tape and Reel Details LOADED TAPE FEED DIRECTION A B H D F C NOTE : CONTROLLING DIMENSION IN MM E G CARRIER TAPE DIMENSION FOR 8SOICN Metric Imperial Code Min Max Min Max A 7.90 8.10 0.311 0.318 B 3.90 4.10 0.153 0.161 C 11.70 12.30 0.46 0.484 D 5.45 5.55 0.214 0.218 E 6.30 6.50 0.248 0.255 F 5.10 5.30 0.200 0.208 G 1.50 n/a 0.059 n/a H 1.50 1.60 0.059 0.062 F D C B A E G H REEL DIMENSIONS FOR 8SOICN Metric Code Min Max A 329.60 330.25 B 20.95 21.45 C 12.80 13.20 D 1.95 2.45 E 98.00 102.00 F n/a 18.40 G 14.50 17.10 H 12.40 14.40 9 www.irf.com Imperial Min Max 12.976 13.001 0.824 0.844 0.503 0.519 0.767 0.096 3.858 4.015 n/a 0.724 0.570 0.673 0.488 0.566 © 2015 International Rectifier June 18, 2015 IR7184SPBF Part Marking Information IR7184S Part number YWW ? Date code Pin 1 Identifier ? XXXX ? MARKING CODE P Lead Free Released Non-Lead Free Released 10 www.irf.com IR logo © 2015 International Rectifier Lot Code (Prod mode – 4 digit SPN code) Assembly site code Per SCOP 200-002 June 18, 2015 IR7184SPBF Qualification Information† †† Industrial Comments: This family of ICs has passed JEDEC’s Industrial qualification. IR’s Consumer qualification level is granted by extension of the higher Industrial level. Qualification Level ††† Moisture Sensitivity Level Human Body Model ESD Machine Model IC Latch-Up Test RoHS Compliant † †† 8 Lead SOIC MSL2 , 260C (per IPC/JEDEC J-STD-020) Class 1B (per JEDEC standard JEDEC JS-001-2012) Class B (per EIA/JEDEC standard EIA/JESD22-A115) Class I, Level A (per JESD78) Yes Qualification standards can be found at International Rectifier’s web site http://www.irf.com/ Higher qualification ratings may be available should the user have such requirements. Please contact your International Rectifier sales representative for further information. Higher MSL ratings may be available for the specific package types listed here. Please contact your International Rectifier sales representative for further information. ††† 11 www.irf.com © 2015 International Rectifier June 18, 2015