Murata LQH5BPN1R0NT0P Chip inductor (chip coil) power inductor (wire wound type) Datasheet

Inductors (Coils) > Chip Inductor (Chip Coil) > Power Inductor (Wire Wound Type)
Data Sheet
1
Chip Inductor (Chip Coil) Power Inductor (Wire Wound Type)
LQH5BP_T0 Series (2020 Size)
c Dimensions
c Packaging
Code
Packaging
Minimum Quantity
L
180mm Embossed Tape
500
K
330mm Embossed Tape
3000
(0.2)
2.0±0.2
5.0±0.2
5.0±0.2
5.0±0.2
1.5±0.2
1.5±0.2
(in mm)
c Rated Value (p: packaging code)
Part Number
Inductance
Rated Current
(Based on Inductance Change)
Rated Current
(Based on Temperature Rise)
DC Resistance
Self Resonance
Frequency (min.)
LQH5BPNR47NT0p
0.47µH ±30%
7.7A
4.0A
0.012ohm ±20%
220MHz
LQH5BPN1R0NT0p
1.0µH ±30%
5.8A
3.1A
0.019ohm ±20%
90MHz
LQH5BPN1R2NT0p
1.2µH ±30%
5.4A
3.1A
0.019ohm ±20%
90MHz
LQH5BPN1R5NT0p
1.5µH ±30%
5.0A
3.0A
0.024ohm ±20%
70MHz
LQH5BPN2R2NT0p
2.2µH ±30%
4.0A
2.6A
0.030ohm ±20%
55MHz
LQH5BPN2R7NT0p
2.7µH ±30%
3.8A
2.5A
0.035ohm ±20%
50MHz
LQH5BPN3R3NT0p
3.3µH ±30%
3.5A
2.3A
0.044ohm ±20%
40MHz
LQH5BPN4R7NT0p
4.7µH ±30%
3.0A
2.0A
0.058ohm ±20%
40MHz
LQH5BPN6R8NT0p
6.8µH ±30%
2.5A
1.65A
0.083ohm ±20%
30MHz
LQH5BPN100MT0p
10µH ±20%
2.0A
1.60A
0.106ohm ±20%
25MHz
LQH5BPN150MT0p
15µH ±20%
1.6A
1.20A
0.187ohm ±20%
18MHz
LQH5BPN220MT0p
22µH ±20%
1.4A
1.05A
0.259ohm ±20%
15MHz
Test Frequency: 100kHz
Class of Magnetic Shield: Magnetic shield of magnetic powder in resin
Operating Temperature Range (Self-temperature rise is included): -40 to +125°C
Operating Temperature Range (Self-temperature rise is not included): -40 to +85°C
Only for reflow soldering.
c Notice (Rated Current)
When Rated Current is applied to the Products,
Inductance will be within ±30% of nominal
Inductance value.
When Rated Current is applied to the Products,
self-generation of heat will rise to 40°C or less.
Continued on the following page.
oThis data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2011.11.2
http://www.murata.com/
Inductors (Coils) > Chip Inductor (Chip Coil) > Power Inductor (Wire Wound Type)
Data Sheet
2
Continued from the preceding page.
c Inductance-Frequency Characteristics (Typ.)
c Inductance-Current Characteristics (Typ.)
10
10
3.3μH
2.7μH
2.2μH
1.5μH
3.3μH
2.2μH
Inductance (μH)
Inductance (μH)
2.7μH
1.5μH
1.0μH/1.2μH
1
0.47μH
0.1
0.1
1.0μH/1.2μH
1
0.47μH
0.1
1
10
100
1
Frequency (MHz)
10
100
Current (mA)
1000
10000
c Temperature Rise Characteristics (Typ.)
40
2.7μH
2.2μH
Temperature Rise (°C)
30
3.3μH
1.5μH
1.0μH/1.2μH
0.47μH
20
10
0
0
1000
2000
3000
Current (mA)
4000
5000
c !Caution/Notice
!Caution (Rating)
Do not use products beyond the rated current as
this may create excessive heat.
Notice
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profile
where peak solder temperature is below the Tin melting
point is used. Please confirm the solderability of Tin
plating termination chip before use.
oThis data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2011.11.2
http://www.murata.com/
Similar pages