Vishay MSP09A03RSEJ Thick film resistor networks, single-in-line, molded sip Datasheet

MSP
www.vishay.com
Vishay Dale
Thick Film Resistor Networks, Single-In-Line, Molded SIP
FEATURES
• Isolated, bussed, and dual terminator
schematics available
Available
• 0.195" (4.95 mm) “A” or 0.350" (8.89 mm) “C”
maximum seated height
• Thick film resisitive elements
• Low temperature coefficient (-55 °C to +125 °C)
± 100 ppm/°C
• Rugged, molded case construction
Available
• Reduces total assembly costs
• Compatible with automatic insertion equipment
and reduces PC board space
• Wide resistance range (10  to 2.2 M)
• Available in tube pack
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
Note
* This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-RoHS-compliant. For example, parts
with lead (Pb) terminations are not RoHS-compliant. Please see the information/tables in this datasheet for details.
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL
MODEL/
SCHEMATIC
PROFILE
POWER RATING RESISTANCE
ELEMENT
TOLERANCE (2)
RANGE
P70 °C
±%

W
0.20
10 to 2.2M
1, 2, 5
0.25
10 to 2.2M
1, 2, 5
0.30
10 to 2.2M
1, 2, 5
0.40
10 to 2.2M
1, 2, 5
0.20
10 to 2.2M
1, 2, 5
0.25
10 to 2.2M
1, 2, 5
TEMPERATURE
COEFFICIENT
(-55 °C to +125 °C)
± ppm/°C
100
100
100
100
100
100
MSPxxx01
A
MSPxxx01
C
MSPxxx03
A
MSPxxx03
C
MSPxxx05
A
MSPxxx05
C
Notes
(1) Tighter tracking available
(2) ± 2 % standard, ± 1 % and ± 5 % available
(3) Continuous working voltage shall be P x R or maximum working voltage, whichever is less
TCR
TRACKING (1)
(-55 °C to +125 °C)
± ppm/°C
50
50
50
50
150
150
MAXIMUM
WORKING
VOLTAGE (3)
VDC
100
100
100
100
100
100
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: MSP06A031K00GDA (preferred part numbering format)
M
GLOBAL
MODEL
MSP
S
P
PIN
COUNT
06 = 6 pin
08 = 8 pin
09 = 9 pin
10 = 10 pin
0
6
PACKAGE
HEIGHT
A = “A” profile
C = “C” profile
A
0
3
1
K
0
0
G
RESISTANCE
TOLERANCE
VALUE
CODE
01 = Bussed
R=
F=±1%
03 = Isolated
K = k
G=±2%
00 = Special
M = M
J=±5%
10R0 = 10 
S = Special
33K0 = 33 k
Z=0
1M00 = 1 M
Jumper
0000 = 0  Jumper
Historical Part Number Example: MSP06A03102G (will continue to be accepted)
MSP
D
SCHEMATIC
06
A
03
PACKAGING
SPECIAL
EJ = Lead (Pb)-free,
tube
DA = Tin/lead, tube
Blank = Standard
(Dash Number)
(Up to 3 digits)
From 1 to 999
as applicable
102
HISTORICAL MODEL PIN COUNT PACKAGE HEIGHT SCHEMATIC RESISTANCE VALUE
New Global Part Numbering: MSP08C05131AGDA (preferred part numbering format)
M
GLOBAL
MODEL
MSP
S
P
PIN
COUNT
06 = 6 pin
08 = 8 pin
09 = 9 pin
10 = 10 pin
0
8
0
5
1
3
1
A
G
RESISTANCE
TOLERANCE
VALUE
CODE
05 = Dual
3 digit impedance
F=±1%
terminator
code, followed by
G=±2%
alpha modifier
J=±5%
(see Impedance
Codes table)
Historical Part Number Example: MSP08C05221331G (will continue to be accepted)
MSP
08
PACKAGE
HEIGHT
A = “A” profile
C = “C” profile
C
C
SCHEMATIC
05
A
221
331
D
G
D03
TOLERANCE CODE
PACKAGING
A
PACKAGING
SPECIAL
EJ = Lead (Pb)-free,
tube
DA = Tin/lead, tube
Blank = Standard
(Dash Number)
(Up to 3 digits)
From 1 to 999
as applicable
G
D03
HISTORICAL
PIN
PACKAGE
RESISTANCE
RESISTANCE
TOLERANCE
SCHEMATIC
PACKAGING
MODEL
COUNT
HEIGHT
VALUE 1
VALUE 2
CODE
Note
• For additional information on packaging, refer to the Through-Hole Network Packaging document (www.vishay.com/doc?31542).
Revision: 13-Feb-15
Document Number: 31510
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MSP
www.vishay.com
Vishay Dale
DIMENSIONS in inches (millimeters)
A
Max.
0.090 (2.29)
Max.
Pin #1
0.015
(0.381)
Min.
0.040 ± 0.010
(1.02 ± 0.254)
0.100 ± 0.010
(2.54 ± 0.254)
Non-Accumulative
GLOBAL MODEL
D Max.
0.016 ± 0.003
(0.406 ± 0.076)
B
C Equal Space
0.135 + 0.015
- 0.010
(3.43 + 0.381
- 0.254)
0.012 ± 0.003
(0.305 ± 0.076)
A (Max.)
B
C
MSP06
0.590 (14.99)
0.500 (12.70)
5
MSP08
0.790 (20.07)
0.700 (17.78)
7
MSP10
0.990 (25.15)
0.900 (22.86)
9
MSP09
0.890 (22.61)
0.800 (20.32)
8
D (Max.)
MSPxxA = 0.195 (4.95)
MSPxxC = 0.350 (8.89)
0.195 (4.95) only
TECHNICAL SPECIFICATIONS
PARAMETER
UNIT
MSP SERIES
Package Power Rating
Maximum at +25 °C and +70 °C
See Derating Curves
Voltage Coefficient of Resistance
Veff
< 50 ppm typical
Dielectric Strength
VAC
200
Isolation Resistance (03 Schematic)

> 100 M
Operating Temperature Range
°C
-55 to +125
Storage Temperature Range
°C
-55 to +150
MECHANICAL SPECIFICATIONS
Marking Resistance to Solvents
Permanency testing per MIL-STD-202, Method 215
Solderability
Per MIL-STD-202, Method 208E, RMA flux
Body
Molded epoxy
Terminals
Copper alloy, solder plated
MSP06C = 0.7 g
MSP08C = 0.9 g
MSP10C = 1.1 g
MSP06A = 0.4 g
MSP08A = 0.5 g
MSP09A = 0.55 g
MSP10A = 0.6 g
Weight
IMPEDANCE CODES
CODE
R1 ()
R2 ()
CODE
R1 ()
R2 ()
500B
82
130
141A
270
270
750B
120
200
181A
330
390
800C
130
210
191A
330
470
990A
160
260
221B
330
680
101C
180
240
281B
560
560
111C
180
270
381B
560
1.2K
121B
180
390
501C
620
2.7K
121C
220
270
102A
1.5K
3.3K
131A
220
330
202B
3K
6.2K
Note
• For additional impedance codes, refer to the Dual Terminator Impedance Code Table document (www.vishay.com/doc?31530).
Revision: 13-Feb-15
Document Number: 31510
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MSP
www.vishay.com
Vishay Dale
CIRCUIT APPLICATIONS

5, 7, 8 (1), or 9 resistors with one pin common
01 Schematic
The MSPxxx01 circuit contains 5, 7, 8 (1), or 9 nominally equal resistors,
each connected between a common pin (pin no. 1) and a discrete PC
board pin. Commonly used in the following applications:
• MOS/ROM Pull-up/Pull-down 
• Open Collector Pull-up 
• TTL Unused Gate Pull-up
• “Wired OR” Pull-up
• Power Gate Pull-up
• TTL Input Pull-down
1
2
3
n-1
Note
Available in “A” Profile only
(1)
n
Standard E-24 resistance values stocked. Consult factory.


3, 4 or 5 isolated resistors
03 Schematic
The MSPxxx03 circuit contains 3, 4, or 5 resistors of nominally equal
value in a compact package. Each resistor is connected to two discrete
PC pins.
1
2 3
4
n-1
Standard E-24 resistance values stocked. Consult factory.

n


Pulse squaring and TTL dual-line terminators
05 Schematic
The MSPxxx05 circuits contain 4, 6, 7 (2), or 8 series pair of resistors.
Each series pair is connected between two common lines. The junction
of these resistor pairs is connected to the input terminals.
R2
R1
The 05 circuits are designed for TTL dual-line termination and pulse
squaring.
Note
(2) Available in “A” Profile only
1
2
3
n-1
n
Many dual terminator resistance values stocked. Consult factory.

DERATING
“A” Profile
1.90
MSP10A Package
1.50
1.15
Power Rating (Watts)
Power Rating (Watts)
“C” Profile
MSP08A Package
MSP06A Package
3.00
MSP10C Package
2.50
MSP08C Package
2.00
1.50
0.45
0.30
MSP06C Package
Single Resistor
03
01 and 05
0.60
0.38
- 50
Derating
Revision: 13-Feb-15
+ 25
+ 70
Single Resistor
03
01 and 05
+ 125 + 150
Ambient Temperature °C
- 50
Derating
+ 25
+ 70
+ 125 + 150
Ambient Temperature C
Document Number: 31510
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MSP
www.vishay.com
Vishay Dale
“A” PROFILE +70 °C PACKAGE RATINGS
“C” PROFILE +70 °C PACKAGE RATINGS
MSP10A
1.25 W
MSP10C
1.60 W
MSP09A
1.12 W
MSP08C
1.30 W
MSP08A
1.00 W
MSP06C
1.00 W
MSP06A
0.75 W
Note
• Higher power ratings available. Contact factory.
PERFORMANCE
TEST
Power Conditioning
Thermal Shock
Short Time Overload
Low Temperature Operation
Moisture Resistance
Resistance to Soldering Heat
CONDITIONS
MAX. R
(TYPICAL TEST LOTS)
1.5 x rated power, applied 1.5 h “ON” and 0.5 h “OFF”
for 100 h ± 4 h at +25 °C ambient temperature
± 0.50 % R
5 cycles between -65 °C and +125 °C
± 0.50 % R
2.5 x rated working voltage 5 s
± 0.25 % R
45 min at full rated working voltage at -65 °C
± 0.25 % R
240 h with humidity ranging from 80 % RH to 98 % RH
± 0.50 % R
Leads immersed in +260 °C solder to within 1/16" of device body for 10 s
± 0.25 % R
Total of 18 shocks at 100 g’s
± 0.25 % R
Vibration
12 h at maximum of 20 g’s between 10 Hz and 2000 Hz
± 0.25 % R
Load Life
1000 h at +70 °C, rated power applied 1.5 h “ON”, 0.5 h “OFF”
for full 1000 h period. Derated according to the curve.
± 1.00 % R
Terminal Strength
4.5 pound pull for 30 s
± 0.25 % R
Insulation Resistance
10 000 M (minimum)
-
-
-
Shock
Dielectric Withstanding Voltage
Revision: 13-Feb-15
Document Number: 31510
4
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 08-Feb-17
1
Document Number: 91000
Similar pages