OPTEK OVM4GTXV Hi-reliability visible led lamp Datasheet

Hi-Reliability Visible LED Lamp
(TO46)
OVM4x, OVM4xTX, OVM4xTXV
•
•
•
•
Hermetically sealed TO-46 package
Choice of blue, green, red or yellow
High-brightness with well-defined spatial radiation patterns
ESD protection built in
Product Photo Here
Each OVM4x, OVM4xTX and OVM4xTXV device is a high-reliability, high-sensitivity visible LED that is mounted
in a hermetically sealed TO-46 package.
“Hi-Reliability” Visible LEDs function in the abnormally severe levels of mechanical, environmental and electrical
stress that are typical of military and harsh industrial applications.
OVM4xTX and OVM4xTXV devices are processed to OPTEK’s 100% screening and QCI program-patterned after
MIL-PRF-19500. Group A and B are performed on every lot. Group C is performed every six months.
Applications
• Automotive exterior and interior lighting
• Architectural lighting
• Electronic signs and signals
Blue
Intensity Typ.
(mcd)
2260
Clear Glass
InGaN
Green
6520
Clear Glass
OVM4RTXV
AlInGaP
Red
3300
Clear Glass
OVM4YTXV
AlInGaP
Yellow
2010
Clear Glass
Part Number
Part Number
Material
Emitted Color
OVM4BTX
OVM4BTXV
InGaN
OVM4GTX
OVM4GTXV
OVM4RTX
OVM4YTX
ANODE
(BRAZED)
CATHODE
(ISOLATED)
Pin 2
Pin 1
RoHS
Lens Color
Pin 1
Cathode
Pin 2
Anode
Dimensions are in inches [ mm]
DO NOT LOOK DIRECTLY AT
LED WITH UNSHIELDED EYES
OR DAMAGE TO RETINA MAY
OCCUR.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue A.4
05/10
Page 1 of 4
Hi-Reliability Visible LED Lamp
OVM4x, OVM4xTX, OVM4xTXV
Absolute Maximum Ratings
TA = 25o C unless otherwise noted
Storage Temperature Range
-65° C to +150° C
Operating Temperature Range
-55° C to +100° C
Reverse Voltage
5V
Continuous Forward Current
2
100 mA
Peak Forward Current (10% Duty Cycle, 1 KHz)
1.6 A
Power Dissipation
370 mW
Lead Soldering Temperature (3mm from the case)1
260° C
Current Linearity vs. Ambient Temperature
-0.2 mA/° C
LED Junction Temperature
115° C
Notes:
1. Solder time less than 5 seconds at temperature extreme.
2. Design of heat dissipation should be considered.
Electrical Characteristics
TA = 25o C unless otherwise noted
SYMBOL
Iv
VF
λP
λD
Δλ
2Θ½
PARAMETER
Luminous Intensity
Forward Voltage
Peak Wavelength
Dominant Wavelength
Spectral Half Width
50% Power Angle
MIN
TYP
MAX
Blue
----
2260
----
Green
----
6520
----
Red
----
3300
----
Yellow
----
2010
----
Blue
----
2.60
2.95
Green
----
2.60
2.95
Red
----
1.80
2.15
Yellow
----
1.80
2.15
Blue
----
463
----
Green
----
530
----
Red
----
630
----
Yellow
----
591
----
Blue
460
465
470
Green
520
530
540
Red
619
624
629
Yellow
584
589
594
Blue
----
22
----
Green
----
35
----
Red
----
15
----
Yellow
----
18
----
----
18
----
UNITS
CONDITIONS
mcd
IF = 20 mA
V
IF = 20 mA
nm
IF = 20 mA
nm
IF = 20 mA
nm
IF = 20 mA
deg
IF = 20 mA
Notes:
1. All ranks will be included per delivery, rank ratio will be based on the chip distribution.
2. To designate luminous intensity ranks, please contact OPTEK.
3. Pb content <1000 PPM.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.4 05/10
Page 2 of 4
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Hi-Reliability Visible LED Lamp
OVM4x, OVM4xTX, OVM4xTXV
Typical Electro-Optical Characteristics Curves
TJ = 25° C
4000
1.0
3500
0.8
3000
Red
0.6
Intensity (mcd)
Normalized Spectral Intensity
Input Current = 100 mA, TJ = 25° C
Yellow
Green
Blue
0.4
2500
Red
Yellow
2000
Green
Blue
1500
1000
0.2
0.0
380
500
430
480
530
580
630
680
730
0
780
0
20
40
Wavelength (nm)
Wavelength Characteristics
80
100
120
Intensity vs Forward Current
100
4.0
80
3.5
Red
3.0
60
Vf (V)
If (mA)
60
Forward Current (mA)
Red
Yellow
40
Green
Yellow
Green
2.5
Blue
Blue
20
2.0
0
1.5
1.4 1.6 1.8
2
2.2 2.4 2.6 2.8
3
-100
3.2 3.4 3.6
- 50
0
50
100
150
200
T e m pe r a t u r e ( D e g . C
Vf (V)
Forward Voltage vs Forward Current
Forward Voltage vs Temperature
10.0
TA = 25°C
IF = 20 mA
OVM4B
OVM4R
1.0
OVM4Y
OVM4G
0.1
-75
- 50
-25
0
25
50
75
100
125
150
Deg C
Relative Intensity vs Temperature
Spatial Intensity Distribution
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue A.4
05/10
Page 3 of 4
Hi-Reliability Visible LED Lamp
OVM4x, OVM4xTX, OVM4xTXV
Shipping Information:
Optek UV LEDs are shipped in either of the below noted conductive trays made for ESD sensitive devices.
Each tray contains up to 100 pieces and is then sealed in a plastic ESD bag. Tray dimensions are in inches
(mm).
14.76
4X 0.500 [12.70]
100X 0.250
100X 0.190
13.0
100X 0.250
100X 1.320
POCKET DETAIL
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.4 05/10
Page 4 of 4
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Similar pages