Panasonic EXCEMT222DC Emi filters small in size and taped type is available digital audio and video equipment Datasheet

EMI Filters
EMI Filters
Type:
EXCEMT
■ Features
■ Recommended Applications
● Small in size and taped type is available
● Excellent noise filtering characteristics using
● Digital equipment Personal Computers,Word
Processors, Printers, HDD, PPC, and
Communication equipment
● Digital audio and Video equipment
● AC adapters and Switching Power supplies
● Engine controls, Panels and Audio systems
● Electronic musical instruments and other
digital devices
T-network connections.
] Preformed leads provide better solderability
for through-hole P.W.B.
■ Explanation of Part Numbers
1
2
3
4
5
6
7
8
9
10
11
E
X
C
E
M
T
1
0
3
D
C
Product Code
Noise Filter
Series
EMT
T-circuit EMI Filter
■ Construction
Nominal Capacitance Temperature
Value
Characteristics
The first two digits are
significant figures of
capacitance value and the
third one denotes the
number of zeroes following
Code Tolerance
B
D
Suffix for
Packing
Code
Packing
C
Bulk Packing
T
Taped & Box
±10 %
+20 %
Ð30 %
■ Schematic
Exterior resin
Ferrite bead
Ferrite bead
Capacitor
Lead
Cylindrical capacitor
Rev.02/04
Design, Specifications are subject to change without notice.
Ask factory for technical specifications before purchase and/or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.
EMI Filters
■ Ratings
Category Temperature Range (Operating Temp. Range): Ð25 ¡C to +85 ¡C
(3)
Part Number
Rated
Voltage
(V DC)
EXCEMT220B1
EXCEMT470B1
EXCEMT101B1
EXCEMT221B1
EXCEMT271B1
EXCEMT471B1
EXCEMT102B1
EXCEMT222D1
EXCEMT332D1
EXCEMT103D1
50
50
50
50
50
50
50
16
16
16
(3)
(2)
Rated 25 dB Attenuation 15 dB Attenuation
Capacitance Tolerance Temperature
Current
Frequency
Frequency
(%)
(pF)
Characteristics
(A DC)
(MHz)
(MHz)
(1)
±20
±20
±20
±20
±20
±20
±20
±20
±20
±30
22
47
100
220
270
470
1000
2200
3300
10000
YB
YB
YB
YB
YB
YB
YB
YD
YD
YD
5
5
5
5
5
5
5
5
5
5
800
450
350
250
250
150
100
50
40
25
to
to
to
to
to
to
to
to
to
to
600
400
250
150
150
70
50
30
25
15
1000
700
550
400
400
350
250
200
160
120
to
to
to
to
to
to
to
to
to
to
1000
1000
900
500
500
500
400
400
400
400
Lead Cut Type: C, Taped Type: T
(1) Measurement Tepmerature: +20 °C, Measurement Frequency: 1 kHz
(2) Temperature Characteristics YB: Maximum capacitance change is ±10 % over the temperature range of –25 °C to +85 °C in reference to +20 °C
YD: Maximum capacitance change is +20, –30 % over the temperature range of –25 °C to +85 °C in reference to +20 °C
(3) Measurement Temperature: +20 °C
Note: Please inquire to the particular capacitance value, on a range of 22 to 10000 pF.
■ Dimensions in mm (not to scale)
■ Standard Lead Taping in mm (not to scale)
2.5±0.5 2.5±0.5
3.85±0.50
Center lead only f 0.45±0.05
12.7±0.2
5.0±0.5
■ Typical Attenuation Characteristics
Attenuation (dB)
0
Measurement Circuit
20
50 W
40
Sample
471
102
60
103
80
1M
5M
10 M
19.0±1.0 7 max.
471
471
f 0.50±0.05
50 M
332
222
100 M
220
470
101
221
271
500 M
~
50 W
1G
Frequency (Hz)
Design, Specifications are subject to change without notice.
Ask factory for technical specifications before purchase and/or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.
f4.0±0.2
18.0±0.5
4.5±1.0
Capacitance
9.5±1.0
471
7 max.
11 max.
2.5 max.
471
2.5 max.
6.5 max.
EMI Filters
■ Packaging Specifications
Part Number
Standard Quantity
Style
Weight (mg/pcs.)
EXCEMT1111C
200 pcs./Bag
Bulk
216
EXCEMT1111T
2000 pcs./Box
Flat box
291
Safety Precautions
● The filter may fail in a short-circuit mode (or open-circuit mode) when subjected to severe conditions
of electrical and/or environmental stresses beyond their specified rating. Burnout or glowing may result in
the worst case.
● Soldering Flux: Use rosin type or nonhalogen type flux.
● Cleaning Solvent: Use alcohol based solution. Consult with us before using any other type of cleaning agent.
● Avoid contact with static electricity.
● Filter characteristics may deteriorate if subjected to surge or other abnormal voltage.
● Excessive mechanical stress may damage the components. Handle with care.
● Store under temperatures ranging from Ð5 ¡C to +40 ¡C and relative humidity from 40 % to 60 %. Avoid
rapid changes of temperature and humidity.
● Use the components within one year of delivery.
● Before ordering, test sample components in your application to ensure proper function and compatibility.
Design, Specifications are subject to change without notice.
Ask factory for technical specifications before purchase and/or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.
Similar pages