RF OS10040280GW-016 Gaas optical receiver 40mhz to 1000mhz Datasheet

OS10040280GW
OS10040280GW
GaAs Optical Receiver
40MHz to 1000MHz
Package: SOT-115J
The OS10040280GW is a hybrid high dynamic range optical
receiver amplifier module. Two of the module pins are for
connection to 24V (DC), one for amplifier supply voltage, the other
for the PIN diode bias. The module contains a single mode optical
input suitable for wavelengths from 1290nm to 1600nm, a terminal
to monitor the PIN diode current, and an electrical output with an
impedance of 75Ω.
BIAS
V+
Features
■
Superior Return Loss Performance
■
Extremely Low Distortion
■
Optimal Reliability
■
Low Noise
■
Standard CATV Outline
■
Excellent Flatness
■
255mA Max. at 24V+
OUTPUT
Applications
OPTICAL INPUT
■
MONITOR
40MHz to 1000MHz CATV
Amplifier Systems
Ordering Information
OS10040280GW-012
Box with 3 Pieces
OS10040280GW-013
Box with 3 Pieces
OS10040280GW-014
Box with 3 Pieces
OS10040280GW-015
Box with 3 Pieces
OS10040280GW-016
Box with 3 Pieces
OS10040280GW-017
Box with 3 Pieces
See Page 3
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or [email protected].
®
DS140317
®
RF MICRO DEVICES and RFMD are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names,
trademarks, and registered trademarks are the property of their respective owners. ©2013, RF Micro Devices, Inc.
1 of 4
OS10040280GW
Absolute Maximum Ratings
Parameter
Frequency Range
Rating
Unit
40 to 1000
MHz
Optical Input Power (continuous)
5
mW
500
V
Storage Temperature
-40 to +85
°C
Operating Mounting Base Temperature
-20 to +85
°C
Minimum Fiber Bending Radius
35
mm
Maximum Tensile Strength
5
N
ESD Sensitivity (Human Body Model; R = 1.5kΩ, C = 100pF)
Caution! ESD sensitive device.
RoHS (Restriction of Hazardous
Substances): Compliant per EU Directive
2011/65/EU.
Exceeding any one or a combination of the Absolute
Maximum Rating conditions may cause permanent
damage to the device. Extended application of Absolute
Maximum Rating conditions to the device may reduce
device reliability. Specified typical performance or
functional operation of the device under Absolute
Maximum Rating conditions is not implied.
Nominal Operating Parameters
Specification
Parameter
Unit
Min
Typ
Condition
Max
V+ = 24V; TMB = 30°C; ZL = 75Ω
General Performance
Responsivity
1700
Slope Straight Line
1900
0
Flatness Straight Line
0.7
Optical Input Return Loss
45.0
Output Return Loss
15.0
V/W
2.0
dB
f = 40MHz to 1000MHz
1.0
dB
f = 40MHz to 1000MHz
dB
17.0
Equivalent Input Noise
7.5
dB
f = 40MHz to 1000MHz
pA/ √Hz
f = 40MHz to 1000MHz
0.85
A/W
λ = (1310 ± 20)nm
0.90
A/W
λ = (1550 ± 20)nm
Spectral Sensitivity
Optical Wavelength
1290
Total Current Consumption (DC)
f = 1000MHz, λ = 1310nm
2100
245
PIN Diode Bias Current
1600
nm
255
mA
10.0
mA
Total current into hybrid with both pins 4 and 5 connected to V+ = 24V
V+ = 24V; TMB = 30°C; ZL = 75Ω
Distortion Data
Second Order Distortion[1]
Third Order Distortion
1.
2.
[2]
-74.0
-72.0
dBc
fm = 54MHz; f1 = 187.25MHz; f2 = 133.25MHz
-70.0
-68.0
dBc
fm = 446.5MHz; f1 = 97.25MHz; f2 = 349.25MHz
-70.0
-67.0
dBc
fm = 548.5MHz; f1 = 109.25MHz; f2 = 439.25MHz
-66.0
-63.0
dBc
fm = 746.5MHz; f1 = 133.25MHz; f2 = 613.25MHz
-65.0
-62.0
dBc
fm = 854.5MHz; f1 = 133.25MHz, f2 = 721.25MHz
-80.0
-78.0
dBc
fm = 55.25MHz; f1 = 109.25MHz; f2 = 133.25MHz; f3 = 187.25MHz
-82.0
-80.0
dBc
fm = 445.25MHz; f1 = 193.25MHz; f2 = 349.25MHz; f3 = 97.25MHz.
-82.0
-80.0
dBc
fm = 547.25MHz; f1 = 217.25MHz; f2 = 439.25MHz; f3 = 109.25MHz
-80.0
-78.0
dBc
fm = 745.25MHz; f1 = 133.25MHz; f2 = 265.25MHz; f3 = 613.25MHz
-78.0
-76.0
dBc
fm = 853.25MHz; f1 = 133.25MHz; f2 = 265.25MHz; f3 = 721.25MHz
Two laser test; each laser with 40% OMI; Popt = 1mW (total).
Three laser test; each laser with 60% OMI; Popt = 1mW (total).
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or [email protected].
DS140317
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
2 of 4
OS10040280GW
Cable Lengths and Connector Types
Tab
Inches
Dimension A
Tolerance
mm
Tolerance
Optical Connector
Type
-012
33.4
-4 to +0.5
848
-102 to +13
FC/APC
-013
33.4
-4 to +0.5
848
-102 to +13
SC/APC
-014
37.5
-3.5 to +0.5
952
-89 to +13
FC/APC
-015
37.5
-3.5 to +0.5
952
-89 to +13
SC/APC
-016
21.1
-1.5 to +0.5
536
-38 to +13
FC/APC
-017
21.1
-1.5 to +0.5
536
-38 to +13
SC/APC
Cable Lengths and Connector Types (continued)
Tab
Dimension B
Inches
mm
-012
No outer jacket
-013
No outer jacket
-014
0.315 to 0.710
8.0 to 18.0
-015
0.315 to 0.710
8.0 to 18.0
-016
0.315 to 0.710
8.0 to 18.0
-017
0.315 to 0.710
8.0 to 18.0
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or [email protected].
DS140317
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
3 of 4
OS10040280GW
Package Drawing (Dimensions in millimeters)
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or [email protected].
DS140317
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
4 of 4
Similar pages