PRODUCT DATASHEET Florentina series last update 24/8/2016 DETAILS Product Number FC14973_FLORENTINA-2X2-M Family Florentina Type Pack Color black Diameter 95,57x95,57 mm Height 17,72 mm Style square Optic Material Holder Material Fastening screw, pin Status production ready ROHS Comliant Yes Date Updated 24/08/2016 OPTICAL PROPERTIES Viewing Light Effi- LED Angle Beam ciency cd/lm Connector XP-L 30 deg 75 % 2.400 - XHP35 HD 31 deg 77 % 2.300 - LUXEON TX 30 deg 80 % 2.700 - LUXEON MZ 30 deg 75 % 2.500 - NVSxx19B/NVSxx19C 30 deg 79 % 2.600 - Oslon Square EC 30 deg 80 % 2.700 - Oslon Square Gen3 30 deg 75 % 2.600 - June 9th 2017 5:36 Copyright Ledil Oy - Subject to change without prior notice - Page 1/1 Ledil Oy Salorankatu 10 24240 SALO, Finland http://www.ledil.com email: [email protected] FAX: +358-2-733 8001 A B C D E F G H 95.57 2 4 40 4 20 LED middle position 1 67 40 83.52 95.57 3 3 3 3 . 2 2 Optional attachment 1 Optional attachment 2 Isometric view Scale: 1:1 Assembly: 1. Attach lenses by pressing them down until they snap into place. 2. Screw the holder (with lenses assembled) to PCB. Inspect that the positioning pins are securely in their holes. 3. Press the shade down on the holder until they are securely attached. 2 Optional side attachment: The holder can also be attached with DIN 7985 M3 nuts 3. 1. One nut per side for rotational attachment 2. Two per side for fixed beam direction 9.9 31.17 2 83.59 3 Recommendations: Side view 16.88 20 40 Screw type DIN 7985 M3, max. torque 0.6Nm Compatible with Strada-2X2MX PCB Tolerances if not otherwise shown According to DIN ISO 2768-1 Linear measures: up to 30mm class M, otherwise class C According to DIN ISO 2768-2 Form and position: class L 1 THIRD ANGLE PROJECTION: INDEX PART NO DESCRIPTION 1 2 3 H Isometric view Scale: 1:1 G C14734 C14735 CMC / MRK lenses FLORENTINA-2X2-SHD FLORENTINA-2X2-HLD MATERIAL PC PC COLOUR black black This drawing is the property of LEDiL Oy. It may not be reproduced, copied or communicated without a written agreement with LEDiL Oy. Ledil Oy Salorankatu 10 FIN 24240 SALO Finland DRAWING TITLE FLORENTINA-2x2 assembly SIZE A3 SCALE 1 PART NUMBER 1:1 WEIGHT - B SHEET A 1/1 NOTE: The typical divergence will be changed by different color, chip size and chip position tolerance. The typical total divergence is the full angle measured where the luminous intensity is half of the peak value.