GLENAIR IPT01A18-11SZC In-line receptacle connector Datasheet

IPT Series
Bayonet Lock
Connectors
IPT 01 A
In-Line Receptacle Connector
with General Duty Backshell
IPT 01 A 18-11 S Z C XX
MIL-C-26482
Series l Type
Mod Code Options
See Table II
01 - In-Line
Receptacle
Contact Type
C - Crimp
(Omit for Solder Cup)
Connector Class
A - Non-Environmental
Alternate Insert Rotation (W, X, Y, Z)
Omit for Normal
Shell Size and
Insert Arrangements
Contact Gender
P - Pin
S - Socket
B
D
G
APPLICATION NOTES
1. In-line receptacle with general duty backshell.
2. Connector Class “A” (non-environmental­—no grommet supplied.
3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins.
4. Standard contact material consists of copper alloy with gold plating over nickel.
5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information.
6. Standard insert is high insulation synthetic rubber.
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
B-38
www.glenair.com
IPT Series
Bayonet Lock
Connectors
IPT 01 A
In-Line Receptacle Connector
with General Duty Backshell
TABLE I: DIMENSIONS
Shell size
B
min.
D
Max.
F
Thread in inches
G
±0.1
L
Max.
8
7.55
15.00
.5000 - 28 UNEF
17.3
40.9
10
10.70
18.20
.6250 - 24 UNEF
21.8
40.9
12
13.85
21.20
.7500 - 20 UNEF
25.1
40.9
14
16.85
24.60
.8750 - 20 UNEF
28.6
40.9
16
20.00
27.60
1.0000 - 20 UNEF
30.6
40.9
18
22.30
30.90
1.1875 - 18 UNEF
33.2
40.9
20
25.75
33.80
1.1875 - 18 UNEF
36.5
45.0
22
28.80
37.10
1.4375 - 18 UNEF
39.6
45.0
24
32.00
40.25
1.4375 - 18 UNEF
43.1
46.0
TABLE II: MODIFICATION CODES
Shell Finish
(Omit for Standard Cad/Olive Drab Finish)
Assembly with Accessories
(Omit for Standard Version)
F2 - Bright Nickel Plating (RoHs)
Key Polarization (Omit for N version)
W, X, Y, Z = Alternates
F6 - Black Electrodeposited Paint (RoHs)
N0 - Connector Less Backshell
F7 - Black Zn-Co Plating (RoHs)
GXXX - Custom Designed Connector
F8 - Olive Drab Zn-Co Plating
STANDARD FINISHES (For QQ-A-591 Aluminum Shells)
Requirements
IAW RoHS
Not IAW RoHS
F2 Electrolytic Nickel F6 Black Non Conductive F7 Black Conductive
G3 Cadmium with Olive F8 Zinc Cobalt with
Drab Passivation
Olive Drab Passivation
Thermal Shock
Salt Spray After
Thermal Shock
Electical Conductivity
Abrasion Resistance
© 2008 Glenair, Inc.
-40°C + 100°C
-55°C + 125°C
-55°C + 125°C
-55°C + 125°C
-40°C + 100°C
24 hour
500 hour
500 hour
500 hour
200 hour
Very Good
Very Good
NO
Very Good
Very Good
Good
Very Good
Very Good
Good
Good
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
B-39
www.glenair.com
Similar pages