MA-COM MABA-011039 Excellent temperature stability Datasheet

MABA-011039
1:4 Step up Flux Coupled Balun Transformer
1 - 300 MHz
Rev. V2
Features







Surface Mount
1:4 Impedance
RoHS Compliant and Lead free
260°C Reflow Compatible
Excellent temperature stability
Available on Tape and Reel
Suitable for all CATV, Broadband and FTTX
applications.
Description
MABA-011039 is a 1:4 flux coupled transmission.
This transformer is ideally suited for CATV and
Broadband applications.
Functional Schematic
Pin Configuration
Ordering Information
MABA-011039
Tape & Reel
MABA-011039-TB
Customer Test Board
1
Primary Dot (input)
2
Primary (ground)
3
Secondary (output2)
4
Centre Tap (ground)
5
Secondary Dot (output1)
1
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MABA-011039
1:4 Step up Flux Coupled Balun Transformer
1 - 300 MHz
Rev. V2
Electrical Specifications: TA = 25°C, Z0 = 75 Ω, Pin = 0dBm
Frequency Range
-
MHz
1
300
Impedance
-
Ω
-
75
-
Impedance Ratio
-
-
-
1:4
-
Insertion Loss 1
(Pin1 - Pin5)
1 - 300 MHz
dB
-
0.7
1.1
Insertion Loss 2
(Pin1 - Pin3)
1 - 300 MHz
dB
-
0.6
1.1
Amplitude Balance
1 - 300 MHz
dB
-
0.05
±0.5
Phase Balance
1 - 300 MHz
ͦ
-
0.2
±3.0
Input Return Loss
(Pin1)
1 - 300 MHz
dB
14
21
-
Recommended Maximum Ratings
Input RF Power
MW
-
2000
DC Current
mA
-
1500
Operating Temperature Range
ºC
-40
+125
Full temperature plots available on request
2
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MABA-011039
1:4 Step up Flux Coupled Balun Transformer
1 - 300 MHz
Rev. V2
PCB layout
Application Schematic
3
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MABA-011039
1:4 Step up Flux Coupled Balun Transformer
1 - 300 MHz
Rev. V2
Typical Performance Curves
Electrical Specifications: TA = 25°C, Z0 = 75 Ω, Pin = 0dBm
4
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MABA-011039
1:4 Step up Flux Coupled Balun Transformer
1 - 300 MHz
Rev. V2
Tape & Reel Information
Outline Drawing
Parameter
Units
Value
Qty per reel
-
2000
Reel Size
mm
330
Tape Width
mm
12.00
Pitch
mm
8.00
Ao
mm
4.40
Bo
mm
4.00
Ko
mm
3.90
Orientation
-
F26
Reference Application Note ANI-019 for orientation
1.
2.
3.
4.
Dimensions in mm.
Tolerance: ±0.2mm unless otherwise noted.
Model number and lot code are printed on the reel.
Lead plating: (CuSn6) Lead Finish SAC-305.
Carrier Tape Orientation
Pin1
5
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MABA-011039
1:4 Step up Flux Coupled Balun Transformer
1 - 300 MHz
Rev. V2
M/A-COM Technology Solutions Inc. All rights reserved.
Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM")
products. These materials are provided by MACOM as a service to its customers and may be used for
informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or
in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM
assumes no responsibility for errors or omissions in these materials. MACOM may make changes to
specifications and product descriptions at any time, without notice. MACOM makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to
any intellectual property rights is granted by this document.
THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR
WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR
INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR
OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY
OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN
THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS,
WHICH MAY RESULT FROM THE USE OF THESE MATERIALS.
MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM
customers using or selling MACOM products for use in such applications do so at their own risk and agree to
fully indemnify MACOM for any damages resulting from such improper use or sale.
6
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
Similar pages