Amphenol NPI-15H-500-A-V Solid state, high reliability Datasheet

NPI-15VC
Series
Voltage Compensated,
Media Isolated, High
Pressure Sensors
Applications
Features
• Process control systems
• Solid state, high reliability
• Hydraulic systems and valves
• High sensitivity with 100 mV ± 1% FSO at 10
VDC
• Automobiles and trucks
• 316L stainless steel, IsoSensor design
• Biomedical instruments
• Linearity 0.1% FSO typical
• Refrigeration and HVAC controls
• Thermal accuracy 0.2% FSO typical
• Appliances and consumer electronics
• Ship and marine systems
• Four standard ranges: 500, 1000, 3000, and
5000 psi (34.5, 69, 207, and 345 bar) available
in absolute or sealed gage
• Aircraft and avionic systems
• Standard configurations include:
—1/2–20 UNF threaded male port with 1.0 in
(24.4 mm) flange
—0.59 in (14.98 mm) diameter x 0.87 in (22.09
mm)
long cylinder with o-ring seals
—1/4–18 NPT male port with 7/8 in flange
—1/8–27 NPT male port with 7/8 in flange
Amphenol
Advanced Sensors
• Custom configurations and other pressure
ranges available. Please consult factory
NPI-15VC Series Specifications
Description
The NovaSensor voltage compensated NPI-15VC
Series offers the performance of our current
compensated sensors with the convenience of using
a voltage supply. Voltage compensation allows
the sensor to be connected directly to the power
supply, thereby eliminating the need for additional
components to construct a constant current source.
These sensors enable field interchangeability with a
calibrated FSO of 100 mV ±1 %.
As with all NPI media isolated sensors, they are
designed to operate in hostile environments and
yet give the outstanding sensitivity, linearity, and
hysteresis of a silicon sensor. The piezoresistive
sensor chip is housed in a fluid-filled cylindrical
cavity and isolated from the measured media by
a stainless steel diaphragm and body. The NPI
Series employs SenStable® processing technology,
providing excellent output stability.
The modular design allows for a variety of pressure
port modules which are hermetically welded to the
sensor head module. Standard types A, B, H, and J
are shown to the right.
For compensation of temperature effects, a resistor
network is supplied on a hybrid ceramic substrate.
The
IsoSensor design minimizes temperature errors to
provide a maximum offset error of 1.0% FSO and a
maximum full scale output error of 0.75% FSO over
the
32°F to 158°F (0°C to 70°C) compensated range.
NPI-15VC Series dimensions
NPI-15VC Series schematic diagram
NPI-15VC Series Specifications
Parameter
General
Pressure Range
Value
Units
Notes
0 to 500 psi
3,447 kPa
0 to 1,000 psi
6,894 kPa
0 to 3,000 psi
20,682 kPa
0 to 5,000 psi
34,470 kPa
Maximum Pressure
2 x
rated pressure
Electrical @ 77°F (25°C) unless otherwise stated
Input Excitation
10
VDC
15 VDC maximum
Insulation Resistance 100M
Ω
@ 50 VDC Input
Impedance (minimum) 4,000
Ω
Output Impedance
5,000
Ω
± 20%
Bridge Impedance
5,000
Ω
± 20%
Environmental
Temperature Range
Operating (9)
–40 to 257°F
(–40°C to 125°C)
Compensated Range
32 to 158°F
(0°C to 70°C)
Vibration
10
gRMS 20 to 2000Hz
Shock
100
g
11 milliseconds
Life (Dynamic Pressure Cycle)
10 x 106 cycles
Mechanical (1)
Weight
0.06
lb
(28 g) NPI–15A–XXX
0.10
lb
(47 g) NPI–15B/H/J–XXX
Media Compatibility
All corrosive media compatible with
316L stainless steel
Case and
Diaphragm Material
316L stainless steel
Recommended O-Ring Type A: 0.472 in (12 mm) ID x 0.059 in
(1.5 mm) wall
Type B: 2-013 per ISO 3601/1
Parameter
Units
Min. Typical
Max. Notes
Performance Parameters 500, 1,000, 3,000, & 35,000 psi
(Note 1,8)
Full Scale Output
mV
99
100
101
2
Linearity
%FSO
–0.35
0.1
0.35
3
Hysteresis and
Repeatability
%FSO
–0.05
0.01
0.05
Thermal Accuracy
of Offset
%FSO
–1.0
0.2
1.0
4
Thermal Accuracy
of FSO
%FSO
–0.75
–0.2
0.75
4
Thermal Hysteresis %FSO
–0.2
±0.1
0.2
5
Short-Term Stability
of Offset
µV/V
5
6
Short-Term Stability
of FSO
µV/V
5
6
Long-Term Stability
of Offset
%FSO
0.1
7
Long-Term Stability
of FSO
%FSO
0.1
7
1.
2.
3.
4.
5.
6.
7.
8.
9.
Warranty
NovaSensor warrants its products against defects in material
and
workmanship for 12 months from the date of shipment .
Products not subjected to misuse will be repaired or replaced.
NovaSensor reserves the right to make changes without further
notice to any products herein. NovaSensor makes no warranty,
representation or guarantee regarding the suitability of its
products for any particular application, nor does NovaSensor
assume any liability arising out of the application or use of any
product or circuit and specifically disclaims and all liability
without limitation consequential or incidental damages. The
foregoing warranties are exclusive and in lieu of all other
warranties, whether written, oral, implied or statutory. No Implied
statutory warranty of merchantability or fitness for particular
purpose shall apply.
Ordering Information
NPI-15
Code Pressure Port Type
A
No port
B
1/2-20 UNF
H
1/4-18 NPT
J
1/8-27 NPT
Code
Pressure Ranges in psi
500
500 psi (3447 kPa)
1KØ
1000 psi (6894 kPa)
3KØ
3000 psi (20,632 kPa) NPI-15A only
5KØ
5000 psi (34,470 kPa) NPI-15A only
Code
Compensation
A
Absolute
S
Sealed gauge
Code
Voltage
V
Constant Voltage
Excitation
NPI-15
Performance with offset , thermal accuracy of offset and thermal accuracy of FSO compensation resistors.
FSO with 10 VDC.
Linearity by best fit straight line.
32°F to 158°F (0°C to 70°C) with reference to 77°F (25°C).
32°F to 158°F (0°C to 70°C), by design.
Normalized offset/bridge voltage_100 hours, typical value, not tested in production.
One year, typical value, not tested in production
All values measured at 77°F (25°C) and at 10 VDC, unless otherwise noted.
Reduced performance outside compensation range.
-
Typical model
number
Amphenol
Advanced Sensors
www.amphenol-sensors.com
© 2014 Amphenol Corporation. All Rights Reserved. Specifications are subject to change without notice.
Other company names and product names used in this document are the registered trademarks or
trademarks of their respective owners.
AAS-920-258C-10/2015
Similar pages