MW62T series TCXO [ Temperature Compensated Crystal Oscillators ] 3.3 V SMD LVCMOS output 11.4 x 9.6 x 2.5 mm Features Wide frequency range : [ 200.01 MHz ~ 800.0 MHz ] Custom frequencies can easily be configued . ● ● General Specifications Paramenters Electrical Spec. Input Voltage ( V DD) 3.3 V ± 5 % Frequency Range 200.0 MHz ~ 800.0 MHz Output Wave Form LVCMOS output Initial Calibration Tolerance Models without mechanical trimmer : < ± 2.0 ppm at +25°C ±2°C. Frequency Stability ( ppm ) ± 0.5 ppm ± 1.0 ppm ± 1.5 ppm ± 2.0 ppm ± 2.5 ppm ± 3.0 ppm ± 5.0 ppm 0°C to 50°C ○ ○ ○ ○ ○ ○ -10°C to 60°C △ ○ ○ ○ ○ ○ ○ ○ : available -20°C to 70°C X ○ ○ ○ ○ ○ ○ △ : please contact us -30°C to 75°C X ○ ○ ○ ○ ○ ○ X : not available -40°C to 85°C X ○ ○ ○ ○ ○ ○ Frequency Stability vs Temperature vs Aging ± 1.0 ppm / year max. at 25C vs Voltage Change Frequency Stability vs Load Change vs Reflow ( SMD type ) ± 0.3 ppm max. , for a ±5% input voltage change . ± 0.3 ppm max. , for a ±10% load condition change . ± 1.0 ppm max. , 1 reflow and measured 24 hours afterwards . Current Consumption ( max. ) Output Logic Levels ○ 40.0 mA ( max. ) [ frequency dependent ] Logic High " 1 " 90% of VDD min. Logic Low " 0 " 10% of VDD max. Output Load 15 pF Start - Up Time ( Ts ) 5.0 m sec. ( typ.) , 10.0 m sec. ( max.) Output Format DC block , AC coupled Rise Time ( Tr ) / Fall Time ( Tf ) 1.2 n sec. ( typical ) [ 0.3 V ↔ 3.0 V, 15 pF load ] Duty Cycle Standard: 50 % ± 10 % ; Option: 50 % ± 5 % ; Measured at 50% V DD. Storage Temperature - 50°C to 100°C Aging ± 3 ppm per year (max.) Phase Noise ( typical ) [ 622.080 MHz ] General Specifications Offset 10 Hz 100 Hz 1K Hz 10 KHz 100KHz dBc / Hz -50 -78 -102 -115 -108 ( Unit : mm ) Mercury www .mercury-crystal.com ■Taiwan : (886)-2-2406-2779 / [email protected] ■U.S.A: (1)-909-466-0427 / [email protected] ■China : (86)-512-5763-8100 / [email protected]