GOOD-ARK F8A Surface mount glass passivated standard rectifier reverse voltage 1200~2000v forward current 1a Datasheet

F8A thru F10A
Surface Mount Glass Passivated Standard Rectifier
Reverse Voltage 1200~2000V Forward Current 1A
Features
•
•
•
•
•
•
Glass passivated Standard Rectifiers
Very low profile - typical height of 1.0 mm
Ideal for automated placement
Low leakage current
Moisture sensitivity: level 1, per J-STD-020
High temperature soldering guaranteed: 260℃/10 seconds
eSGA
(SOD‐123FL)
Typical Applications
For use of general purpose rectification in lighting, cellular phone, portable device,
power supplies and other consumer applications.
Maximum Ratings
(TA = 25 °C unless otherwise noted)
Parameter
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average
g forward rectified current
Peak forward surge current 8.3 ms single half
sine-wave superimposed on rated load
Operating junction and storage temperature
range
Symbol
F8A
F9A
F10A
Unit
VRRM
VRMS
VDC
IF(AV)
( )
1200
840
1200
1500
1050
1500
1.0
2000
1400
2000
V
V
V
A
IFSM
30
A
TJ, TSTG
- 55 to + 150
°C
Electrical Characteristics
Parameter
Test Conditions
Maximum instantaneous
1.0A ,TA=25℃
forward voltage
Maximum DC reverse current TA=25℃
at rated DC blocking voltage
Typical junction capacitance 4.0 V, 1 MHz
Typical thermal resistance
1)
j ti to
juntion
t ambient
bi t
(TA = 25 °C unless otherwise noted)
Symbol
F8A
F9A
F10A
Unit
VF
1.1
Volts
IR
5
µA
CJ
5.4
pF
RθJA
70
℃/W
Note:1),The thermal resistance from junction to ambient,mounted on P.C.B with 5×5mm copper pads,2 OZ,FR4 PCB
www.goodark.com
1/4
2015.07-Rev.A
F8A thru F10A
Surface Mount Glass Passivated Standard Rectifier
Reverse Voltage 1200~2000V Forward Current 1A
Ratings and Characteristics Curves
(TA = 25℃ unless otherwise noted)
Figure 2.Maximum Non‐Repetitive Peak
g Current
Forward Surge
Figure 1.Forward Current Derating Curve
Figure 4. Typical Reverse Characteristics
Figure 3. Typical Instantaneous Forward Characteristics
www.goodark.com
2/4
2015.07-Rev.A
F8A thru F10A
Surface Mount Glass Passivated Standard Rectifier
Reverse Voltage 1200~2000V Forward Current 1A
Package Outline Dimensions
DIM
A
Unit: mm
Unit: inch
MIN
MAX
MIN
MAX
0.9
1.08
0.035
0.043
A1
0
0.1
0.000
0.004
B
0.85
1.05
0.033
0.041
C
0.1
0.25
0.004
0.010
D
1.7
2
0.067
0.079
E
2.9
3.1
0.114
0.122
L
0.43
0.83
0.017
0.033
HE
3.5
3.9
0.138
0.154
Soldering footprint
Packing Information
Packing quantities:
3000 pcs/Reel, 40 Reels/Box; 8mm Tape, 7" Reel
Tape & Reel Specification
www.goodark.com
3/4
2015.07-Rev.A
F8A thru F10A
Surface Mount Glass Passivated Standard Rectifier
Reverse Voltage 1200~2000V Forward Current 1A
Disclaimers
These materials are intended as a reference to assist our customers in the selection of the Suzhou
Good-Ark product best suited to the customer’s application; they do not convey any license under
any intellectual property rights,
rights or any other rights,
rights belonging to Suzhou Good-Ark
Good Ark Electronics Co.,
Co
Ltd.or a third party.
Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement
of any third-party’s rights, originating in the use of any product data, diagrams, charts, programs,
algorithms, or circuit application examples contained in these materials.
All information contained in these materials, including product data, diagrams, charts, programs
and algorithms represents information on products at the time of publication of these materials, and
are subject to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product
improvements or other reasons. It is therefore recommended that customers contact Suzhou
Good-Ark Electronics Co., Ltd. or an authorized Suzhou Good-Ark Electronics Co., Ltd. for the
latest product information before purchasing a product listed herein. The information described
here may
ma contain technical inaccuracies
inacc racies or typographical
t pographical errors.
errors Suzhou
S ho Good-Ark
Good Ark Electronics Co.,
Co
Ltd. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies
or errors. Please also pay attention to information published by Suzhou Good-Ark Electronics Co.,
Ltd. by various means, including our website home page.
(http://www.goodark.com)
When using any or all of the information contained in these materials, including product data,
diagrams, charts, programs, and algorithms, Please be sure to evaluate all information as a total
system before making a final decision on the applicability of the information and products. Suzhou
Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability or other loss
resulting from the information contained herein.
The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or
reproduce
d
in
i whole
h l or in
i partt these
th
materials.
t i l
Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further
details on these materials or the products contained herein.
www.goodark.com
4/4
2015.07-Rev.A
Similar pages