7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION BY - 6 5 4 3 2 20 LOC GP ALL RIGHTS RESERVED. CAGE ASSEMBLY HEAT SINK SLOT CAGE ASSEMBLY D 1 REVISIONS DIST 00 P LTR DESCRIPTION DATE DWN APVD A RELEASED PER ECO-13-007850 09MAY2013 PP SH A1 RELEASED PER ECO-13-015033 24SEP2013 JZ SH 1 MATERIAL: CAGE ASSEMBLY - NICKEL-SILVER ALLOY. EMI SPRINGS - COPPER ALLOY. 2 FINISH: EMI SPRINGS - 0.8um MIN MATTE TIN OVER 0.8um MIN NICKEL NON-PLATED EDGES PERMISSIBLE. D 3. MATES WITH SFP MSA COMPLIANT TRANSCEIVERS. 4 PADS AND VIAS CHASSIS GROUND. 5 DATUM AND BASIC DIMENSION ESTABLISHED BY CUSTOMER. 6. MINIMUM PC BOARD THICKNESS: SINGLE SIDED = 1.50 mm EMI SPRINGS EMI SPRINGS 2170128-1 9.00 7 REFERENCE APPLICATION SPEC. 114-13120, HOLE A, FOR RECOMMENDED DRILL HOLE DIAMETER AND PLATING THICKNESS. 8 REFERENCE APPLICATION SPEC. 114-13120, HOLE C, FOR RECOMMENDED DRILL HOLE DIAMETER AND PLATING THICKNESS. 2170128-2 0.20 C C ( 15.0 ) 16.50 14.00 0.10 PORT OPENING B 0.20 26.50 0.20 APPROXIMATE LOCATION OF DATE CODE 8.95 # 0.15 PORT OPENING B ( 9.7 ) ( 3.00 ) TYP ( 11.5 ) ( 48.7 ) WITH HEAT SINK SLOT 2170128-2 DESCRIPTION PART NUMBER WITHOUT HEAT SINK SLOT A THIS DRAWING IS A CONTROLLED DOCUMENT. DIMENSIONS: mm MATERIAL 4805 (3/11) -1 TOLERANCES UNLESS OTHERWISE SPECIFIED: 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH 0.25 0.20 0.15 0.15 -2 DWN 30AUG2011 CHK 30AUG2011 APVD 30AUG2011 TIM XUE C. WANG C. WANG PRODUCT SPEC 108-2364 APPLICATION SPEC - 114-13120 WEIGHT - Customer Drawing 2170128-1 A TE Connectivity NAME SFP+ 1X1 CAGE ASSEMBLY PRESS-FIT, EXTERNAL EMI SPRINGS - SIZE CAGE CODE A1 00779 DRAWING NO 2170128 SCALE 6:1 SHEET 1 RESTRICTED TO OF - 2 REV A1 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION 6 5 4 3 2 20 LOC GP ALL RIGHTS RESERVED. BY - 1 REVISIONS DIST 00 P LTR DESCRIPTION DATE SEE SHEET 1 - DWN APVD - - - 15.45 4X R 0.30 MAX EACH CUTOUT 3.2 10.40 20X D 20X 16.25 +0.10 0.23 -0.14 TOP OF PC BOARD TO INSIDE OF BEZEL MIN 0.50 3.50 0.30 BACK OF BEZEL TO FRONT OF PC BOARD RECOMMENDED BEZEL CUTOUT SCALE 4:1 5 0.05 D 0.03 PIN #20 PIN #1 3.33 8.13 RECOMMENDED BEZEL AND PC BOARD ORIENTATION SCALE 4:1 -X- 2.00 7.1 2.80 10.925 ( 11.93 ) 34.5 10.525 ( 9.6 ) 2.80 5 -Y- THIS AREA DENOTES COMPONENT KEEP-OUT (TRACES ALLOWED) C 5 ( Y.YY 1.05 ) 4 3X 7.2 7 PLATING REQUIRED -B- CROSS-HATCHED AREA DENOTES COMPONENT AND TRACE KEEP-OUT (EXCEPT CHASSIS GROUND) 10.0 ( 2.5 0.85 ) 4 18X 8 PIN #10 PLATING REQUIRED -A- 2.5 C 0.8 1.55 PIN #11 0.90 0.05 2 HOLES DETAIL A SCALE 8:1 5.68 8.58 11.925 11.08 B 9.6 14.25 4.8 16.25 9X 4 11X 0.95 0.05 PLATING REQUIRED o 2.00 9X ( 4 11X 2.00 1.05 ) 4 7 5.0 PLATING REQUIRED SEE DETAIL A 10.0 26.8 A B A 6X 41.3 THIS DRAWING IS A CONTROLLED DOCUMENT. 3X 42.3 RECOMMENDED PCB LAYOUT SCALE 8:1 4805 (3/11) DIMENSIONS: mm MATERIAL - TOLERANCES UNLESS OTHERWISE SPECIFIED: 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH 0.25 0.20 0.15 0.15 - DWN 30AUG2011 CHK 30AUG2011 APVD 30AUG2011 TIM XUE C. WANG C. WANG PRODUCT SPEC 108-2364 APPLICATION SPEC - 114-13120 WEIGHT - Customer Drawing TE Connectivity NAME SFP+ 1X1 CAGE ASSEMBLY PRESS-FIT, EXTERNAL EMI SPRINGS - SIZE CAGE CODE A1 00779 DRAWING NO 2170128 SCALE 6:1 SHEET 2 RESTRICTED TO OF - 2 REV A1