EC810/EC811 SERIES ECLIPSE MAXI - LED 8” Pole/Wall mount TYPE: QUANTITY: PROJECT: CATALOG NUMBER: FIXTURE WATTAGE 1 2 3 4 VOLTAGE FINISH OPTION OPTION 1- Heavy cast aluminum top cover with integral LED heat dissipating pad. 2- 30” dia. x .090” (2.3) thick hard aluminum top shade. Underside surface is painted white enamel to optimize light performance (EC811 only). 3- High impact white translucent UV stabilized acrylic diffuser. 4- Set of 4 X 1/2” (13) solid aluminum struts. 5- Cast aluminum upper electrical housing. 6- Cast aluminum lower electrical housing. OPTION OPTION EC810 EC811 5 6 MATERIALS Eclipse is made of corrosion resistant 356 aluminum alloy with a copper (CU) content of less than 0.1%. Light source is enclosed in a high impact white translucent UV stabilized acrylic sealed diffuser. The lower cast aluminum housing fits with a 4” or 5” (102 or 127) pole and contains all electrical controls on a removable tray. CERTIFICATION Tested to UL1598 and CSA 22.2 #250. ETL listed wet location. Photometric testing performed by an independent laboratory in accordance with IES LM-79-08 standards at 25ºC. Lumen depreciation in accordance with IESNA LM80 standards. CE certification on request. Rated IP65. ELECTRICAL LED DRIVER Standard driver is 0-10V dimming-ready (dims to 10%) with: 120-277 multi-volt compatibility (50-60Hz), optional 347V on request, minimum operating temperature of -30ºC/-22ºF, output over voltage protection, output over current protection, output short circuit protection with auto-recovery, and over temperature protection (110ºC). LED Standard 4000K/80CRI. Optional 2700K, 3000K and 3500K. Removable modular LED platform. LIFE 30” (762) 12.5” (317) 29.4” (747) 29.4” (747) 75,000hrs L86B50 (based on IESNA TM-21 Test Method and LM-80 data). 145,000hrs L70B50 (calculated projection from LM-80 data). FINISH Five-stage preparation process including preheating of cast aluminum parts for air extraction, and an environmentally friendly alloy sealant. Polyester powder coating is applied through an electrostatic process and oven cured for long term finish. EC810 EPA: 0.96 EC811 EPA: 1.25 MOUNTING LUMINIS Toll free: 866.586.4647 Fax: 514.683.8872 260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5 Luminaires may be altered for design improvement or discontinued without prior notice. Nov 2017 Rev 0 Maximum weight: 25.5lbs (11.5kg) Eclipse is designed for ease of access and installation. Standard luminaire mounts on a 4” (102) or 5” (127) pole. Alternate poles or wall attachments are proposed with high quality components to meet multiple installation conditions. LUMINIS.COM 1 EC810/EC811 SERIES ECLIPSE MAXI - LED TYPICAL PHOTOMETRY SUMMARY Descriptive Information EC810-L1W65r1 EC811-L1W65r1 Total Lms: 4553 Lumens Total Input Watts: 60.1 W Source: LED Efficacy: 75.7 Lumens/Watt BUG: B2-U4-G3 CCT/CRI: 4000K/80 Maximum Candela: 584 @ 65ºV Please visit our web site www.luminis.com for complete I.E.S. formatted download data. LUMINAIRE SELECTION MODEL# LED LIGHT SELECTION SUFFIX L1W18r1 L1W30r1 L1W48r1 L1W65r1 VOLTAGE INPUT WATTS DELIVERED LUMENS 22W 38W 51W 60W 1805 3035 3891 4553 CRI CCT ºK 80 4000K FINISH 1 STANDARD COLORS 120V 277V WHT BKT BZT MST GRT DGT CHT Optional 347V EC810 Snow white Jet black Bronze Matte silver Titanium gray Gun metal Champagne OPTIONAL COLORS CS Custom color RAL RAL# color EC811 (Refer to color chart) OPTIONS ELECTRICAL FS PH 347L MOUNTING Fuse Photocell 2 347V input power driver 2 LIGHT Alternate CCT ºK LED (LCF: Lumen conversion factor) K27 K3 K35 2700K CCT 80 CRI (LCF: 0.91) 3000K CCT 80 CRI (LCF: 0.94) 3500K CCT 80 CRI (LCF: 0.98) NOTE: Other CCT & higher CRI available, please consult factory. AC8 2AC8 AW8 EC8P 2EC8P Pole mount attachment with 45º support Double pole mount attachment with 45º support at 180º Wall mount attachment with 45º support Pole mount attachment with stacked arms Double pole mount attachment with stacked arms at 180º EC8PS Pole mount attachment with short stacked arms (EC810 only) 2EC8PS Double pole mount attachment with short stacked arms at 180º (EC810 only) EC8W Wall mount attachment with stacked arms EC8WS Wall mount attachment with short stacked arms (EC810 only) TN3 3” Tenon pole adaptor3 PR8 Pedestal mount adaptor ACCESSORIES HS8 House side shield LUMINIS Toll free: 866.586.4647 Fax: 514.683.8872 260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5 Luminaires may be altered for design improvement or discontinued without prior notice. Nov 2017 Rev 0 NOTES 1- Luminaires are factory prewired for 120V (if no voltage is specified). For other voltages, please specify with catalog number or consult factory. 2- Fuse and photocell options are normally installed with poles when specified with Luminis luminaires (except for other types of mounting). 3- 3” tenon pole adaptor only required for 3” O.D. poles by others. LUMINIS.COM 2 EC810/EC811 SERIES ECLIPSE MAXI - LED POLE MOUNT 28” (711) 12” (304) 18” (457) 42.2” (1072) 42.2” (1072) 42.2” (1072) 30” 17.75” (762) (451) 12” (304) 12” (304) Power feed AC8 1” X 3” (25x76) extruded aluminum extended arm pole mounting adaptor designed to fit with 4 to 5” dia. poles. 1/2” dia. X 45º standard natural stainless steel rod support. (EPA: 0.7) 2AC8 Double pole mount attachments with 45º support at 180º 2EC8P Double pole mount attachment with arms at 180º NOTE: 8” Dia. (203) base 4” (102) dia. Power feed opening 6” (152) dia. Bolt circle Power feed Power feed EC8P (EC810 and EC811) Set of (2) 1” X 3” (25x76) extruded aluminum side pole straight mounting. Pole mounting adaptor fits with 4 to 5” dia. poles. (EPA: 0.97) EC8PS (EC810 only) Set of (2) 1” X 3” (25x76) extruded aluminum side pole straight mounting. Pole mounting adaptor fits with 4 to 5” dia. poles. (EPA: 0.72) 2EC8PS Double pole mount attachment with short arms at 180º (EC810 only) PST pole with AC8 or 2AC8 attachment requires a 30” (762) tenon extension over pole nominal height. EC8P, 2EC8P, EC8PS and 2EC8PS require an 18” tenon extension. Factory installed. 34.5” (876) PR8 8” Dia.(203) X 8 3/4” (222)H. extruded aluminum stand designed for short walls or pier mount. MATCHING POLE SELECTION Ø 4” Height PAA410 PAA510 PST10 ------- PSB10 10 Ft. (3 M) PAA412 PAA512 PST12 ------- PSB12 12 Ft. (3,6 M) PAA414 PAA514 PST14 ------- PSB14 14 Ft. (4,2 M) PAA416 PAA516 PST16 PTA16 PSB16 16 Ft. (4,8 M) PAA418 PAA518 ------- PTA18 PSB18 18 Ft. (5,5 M) PAA420 PAA520 ------- PTA20 PSB20 20 Ft. (6,0 M) ------- ------- ------- PTA25 ------- 25 Ft. (7,6 M) Nov 2017 Rev 0 Ø 4” Ø 5” Ø 4” Tapered Pole For additional pole details, please refer to separate pole specification sheet. Ø 4”= 100mm Ø5”= 127mm PSB Pole series LUMINIS Toll free: 866.586.4647 Fax: 514.683.8872 260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5 Luminaires may be altered for design improvement or discontinued without prior notice. PST Pole series PTA Pole Series PAA Pole series LUMINIS.COM 3 EC810/EC811 SERIES ECLIPSE MAXI - LED WALL MOUNT 28” (711) 11” (279) 18” (457) 42.2” (1072) 17.75” (451) 42.2” (1072) 42.2” (1072) Power feed Power feed Power feed AW8 1” X 3” (25X76) extruded aluminum extended arm wall mounting adaptor with cast aluminum covers and galvanized steel mounting plates. 1/2” dia. X 45º standard natural stainless steel rod support. EC8W (EC810 and EC811) Set of (2) 1” X 3” (25X76) extruded aluminum wall mount arms with cast aluminum wall plate. Mounting EC8WS (EC810 only) Set of (2) 1” X 3” (25X76) extruded aluminum wall mount arms with cast aluminum wall plate. Mounting 3” (76) 4.625” (118) 17.75” (451) Mounting 3” (76) 6.125” (156) 3” (76) 4.625” (118) Power feed 6.125” (156) 4.625” (118) Power feed Nov 2017 Rev 0 Power feed LUMINIS Toll free: 866.586.4647 Fax: 514.683.8872 260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5 Luminaires may be altered for design improvement or discontinued without prior notice. LUMINIS.COM 4