Newhaven NHD-320240WG-ATMI-TZ Graphic liquid crystal display module Datasheet

NHD-320240WG-ATMI-TZ#
Graphic Liquid Crystal Display Module
NHD320240WGATMITZ#-
Newhaven Display
320 x 240 pixels
Display Type: Graphic
Model
White LED Backlight
STN-Blue (-)
Transmissive, 6:00 Optimal View, Wide Temperature
Built-in Negative Voltage and Temperature Compensation
RoHS Compliant
Newhaven Display International, Inc.
2661 Galvin Ct.
Elgin IL, 60124
Ph: 847-844-8795
Fax: 847-844-8796
www.newhavendisplay.com
[email protected]
[email protected]
Document Revision History
Revision
0
Date
9/25/15
Description
Initial Release
Functions and Features
•
•
•
•
•
•
•
320 x 240 pixels
Built-in Negative Voltage
No Controller
NT7086 Driver
+5.0V power supply
RoHS Compliant
Built-in Temperature Compensation Circuit
[2]
Changed by
SB
L
A
I
Mechanical Drawing
1
2
3
4
160.0 0.5
4.0
122.0(VA)
115.18(AA)
Red
White
190.0 10.0
p=1.25
P1.25*13=16.25
18.75
Contact Side
SCALE 2/1
1
206.0 3.0
5.0 1.0
O
C
w=0.8
0.36
0.34
0.36
0.34
C
D
F
N
4- 3.5PTH
4- 6.0PAD
B/L
Date
1
DB0
2
DB1
3
DB2
4
DB3
5 DISPOFF
6
FLM
7
NC
8
LP
9
CP
10
Vdd
Vss
11
12
Vee
13
Vo
14 FGND
A
B
C
37.9
1.0
(PCB)
1
3
A
K
0.30 0.05
D
DOT SIZE
SCALE 10/1
Date
09/25/15
The stiffen tape of the FFC cable is in the same diraction
as LCD panel side.and it's contact side as PCB component's side
2
T
N
E
D
I
320*240 Dots
Max13.0
6.5
10.0
4.0
8.5
11.31
101.0
92.0(VA)
86.38(AA)
2.15
104.7
109.0 0.5
B
141.0
25.0
28.41
6
Description
152.0
11.0
A
5
Rev
Unit
Gen. Tolerance
±0.3mm
3
4
mm
5
Model:
NHD-320240WG-ATMI-TZ#
6
The drawing contained herein is the exclusive property of Newhaven Display International, Inc. and shall not be copied, reproduced, and/or disclosed in any format without permission.
[3]
Pin Description and Wiring Diagram
Pin No.
1-4
5
6
7
8
9
10
11
12
13
14
A
K
Symbol
DB0-DB3
DISP OFF
FLM
M
LP
CP
VDD
VSS
VEE
V0
FGND
LED +
LED -
External
Connection
MPU
MPU
MPU
MPU
MPU
Power Supply
Power Supply
Power Supply
Adj. Power Supply
Power Supply
Power Supply
Function Description
Signal data bus
Display On/Off
Scan Start-up signal
No Connect
Data latch pulse
Data shift pulse
Supply voltage for logic (+5.0V)
Ground
Negative voltage output (-25V)
Supply voltage for contrast (approx. -18.6V)
No Connect
Backlight Anode (+3.5V)
Backlight Cathode (Ground)
Recommended LCD connector: 1.25mm pitch, 14-pos FFC connector Mates with: Molex p/n 0039532144
Backlight connector: JST p/n: XHP-3
Mates with: JST p/n: B 3B-XH-A
[4]
Electrical Characteristics
Item
Operating Temperature Range
Storage Temperature Range
Supply Voltage
Supply Current
Supply for LCD (contrast)
“H” Level input
“L” Level input
“H” Level output
“L” Level output
Backlight Supply Voltage
Backlight Supply Current
Optical Characteristics
Item
Viewing Angle – Top
Viewing Angle – Bottom
Viewing Angle – Left
Viewing Angle – Right
Contrast Ratio
Response Time (rise)
Response Time (fall)
Symbol
Top
Tst
VDD
IDD
VDD-V0
VIH
VIL
VOH
VOL
VLED
ILED
Symbol
Condition
Absolute Max
Absolute Max
-
Min.
-20
-30
2.7
60
23
0.8*VDD
0
VDD-0.4
-
Typ.
5.0
75
23.6
-
Max.
+70
+80
5.5
80
24.2
VDD
0.2*VDD
VDD
0.4
Unit
⁰C
⁰C
V
mA
V
V
V
V
V
VLED=3.5V
3.4
-
3.5
128
3.6
160
V
mA
Max.
300
350
Unit
°
°
°
°
Ta=25°C, VDD=5.0V
Ta=25°C
Condition
Cr ≥ 2
Cr
Tr
Tf
-
Driver Information
Min.
-
Typ.
20
40
30
30
3
200
250
Built-in NT7086 driver.
Please download specification at http://www.newhavendisplay.com/app_notes/NT7086.pdf
[5]
ms
ms
Timing Characteristics
[6]
[7]
[8]
Quality Information
Test Item
Content of Test
High Temperature storage
Endurance test applying the high storage
temperature for a long time.
Endurance test applying the low storage
temperature for a long time.
Endurance test applying the electric stress
(voltage & current) and the high thermal
stress for a long time.
Endurance test applying the electric stress
(voltage & current) and the low thermal
stress for a long time.
Endurance test applying the electric stress
(voltage & current) and the high thermal
with high humidity stress for a long time.
Endurance test applying the electric stress
(voltage & current) during a cycle of low
and high thermal stress.
Endurance test applying vibration to
simulate transportation and use.
Low Temperature storage
High Temperature
Operation
Low Temperature
Operation
High Temperature /
Humidity Operation
Thermal Shock resistance
Vibration test
Static electricity test
Test Condition
Endurance test applying electric static
discharge.
Note 1: No condensation to be observed.
Note 2: Conducted after 4 hours of storage at 25⁰C, 0%RH.
Note 3: Test performed on product itself, not inside a container.
2
-30⁰C , 200hrs
1,2
+70⁰C 200hrs
-20⁰C , 200hrs
1
+60⁰C , 90% RH , 96hrs
1,2
-20⁰C,30min -> 25⁰C,5min ->
70⁰C,30min = 1 cycle
10 cycles
10-55Hz , 15mm amplitude.
60 sec in each of 3 directions
X,Y,Z
For 15 minutes
VS=800V, RS=1.5kΩ, CS=100pF
One time
Precautions for using LCDs/LCMs
See Precautions at www.newhavendisplay.com/specs/precautions.pdf
Warranty Information and Terms & Conditions
http://www.newhavendisplay.com/index.php?main_page=terms
[9]
Note
+80⁰C , 200hrs
3
Similar pages