Wall DTEM1036E1 100 - 240vac input voltage range c14, c8, and c6 ac inlet connector type Datasheet

DATASHEET
Rev. A
DTEM1036 SERIES
100~240VAC Input Voltage Range
C14, C8, and C6 AC Inlet Connector Types
15~36 Watts, Single Outputs
Medical AC/DC Desktop Power Supplies
IEC-320-C14
IEC-320-C8
IEC-320-C6
FEATURES
 Single Outputs
 100~240VAC Input Voltage Range
 CEC/Energy Star Level IV Compliant
 C14, C8, and C6 AC Inlet Connectors Available
 RoHS & WEEE Compliant
 Dimensions: 3.86” x 1.77” x 1.22”
 Short Circuit and Over Voltage Protection
 UL60601-1 Medical Approvals
 MTBF: > 30,000 Hours
 Optional Output Connectors Available
DESCRIPTION
The DTEM1036 series of medical AC/DC desktop power supplies provides up to 36 Watts of continuous output
power in a 3.86” x 1.77” x 1.22” package. This series consists of single output models with a wide input voltage
range of 100~240VAC. The DTEM1036 series is RoHS, WEEE, and CEC/Energy Star Level IV compliant and
has UL60601-1 medical approvals. These models are also protected against over voltage and short circuit
conditions. This series has three AC inlet connector types available: IEC-320-C14, IEC-320-C8, and IEC-320-C6.
Please call factory for ordering details.
05/24/2012
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
Page 1 of 4
DTEM1036 Series
C14, C8, & C6 Inlet Types
15~36 Watts, Single Outputs
Medical AC/DC Desktop Power Supplies
Rev. A
SPECIFICATIONS: DTEM1036 SERIES
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
INPUT SPECIFICATIONS
Input Voltage Range
Input Frequency
Input Current
Inrush Current
OUTPUT SPECIFICATIONS
Output Voltage (See Note 2)
Line Regulation
TEST CONDITIONS
Min
Max
Unit
100
240
VAC
50
60
Hz
1.0
A
60
A
See Table
defined by changing ±10% of input voltage
from nominal line and rated load.
Load Regulation
-1
+1
%
-5
+5
%
Output Current
See Table
Minimum Load
0
A
Output Power
Ripple & Noise
Typ
See Table
Measured at nominal line and full load with
20MHz limited bandwidth and 0.1µF ceramic
and 47µF aluminum capacitors in parallel
across the output.
240
Hold-up Time
mVp-p
8.3
ms
Turn-on Time
3
s
PROTECTION
Over Voltage Protection
Automatic recovery
Short Circuit Protection
Automatic recovery
GENERAL SPECIFICATIONS
Efficiency (typical)
82
%
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
Storage Temperature
Storage Humidity
MTBF
0
50
°C
-20
85
°C
5
95
%
30,000
hours
PHYSICAL SPECIFICATIONS
3.86 x 1.77 x 1.22 inches
(98 x 45 x 31 mm)
IEC-320-C14, C8, and C6
Dimensions (L x W x H)
AC Inlet Connector (See Note 1)
Weight
7.76oz (220g)
SAFETY & EMC
Safety Standards
Compliance
05/24/2012
UL60601-1
RoHS, WEEE, CEC/Energy Star Level IV
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
Page 2 of 4
DTEM1036 Series
C14, C8, & C6 Inlet Types
15~36 Watts, Single Outputs
Medical AC/DC Desktop Power Supplies
Rev. A
MODEL SELECTION TABLE
Model Number (1)
Input Voltage Range
Output Voltage (2)
Output Current
Min
Max
Maximum
Output Power
DTEM1036A1
9 ~ 15 VDC
0A
3A
36W
DTEM1036B1
9 ~ 15 VDC
0A
2.5A
30W
9 ~ 15 VDC
0A
2A
24W
DTEM1036D1
9 ~ 15 VDC
0A
1.5A
18W
DTEM1036E1
9 ~ 15 VDC
0A
1A
15W
DTEM1036A2
9 ~ 15 VDC
0A
3A
36W
DTEM1036B2
9 ~ 15 VDC
0A
2.5A
30W
9 ~ 15 VDC
0A
2A
24W
DTEM1036D2
9 ~ 15 VDC
0A
1.5A
18W
DTEM1036E2
9 ~ 15 VDC
0A
1A
15W
DTEM1036A3
9 ~ 15 VDC
0A
3A
36W
DTEM1036B3
9 ~ 15 VDC
0A
2.5A
30W
9 ~ 15 VDC
0A
2A
24W
DTEM1036D3
9 ~ 15 VDC
0A
1.5A
18W
DTEM1036E3
9 ~ 15 VDC
0A
1A
15W
DTEM1036C1
DTEM1036C2
DTEM1036C3
100 ~ 240 VAC
100 ~ 240 VAC
100 ~ 240 VAC
AC Inlet Type
IEC-320-C14
IEC-320-C8
IEC-320-C6
NOTES
1. The number in red represents the type of AC inlet connector: “1” for IEC-320-C14 type, “2” for IEC-320-C8
type, and “3” for IEC-320-C6 type.
2. The output voltage is specified as a range (Ex: 9~15VDC); the customer must specify what they want the
voltage set at.
3. Ripple and Noise is measured at nominal line and full load with 20MHz limited bandwidth and a 0.1µF ceramic
and 47µF aluminum capacitors in parallel on the output.
4. Optional output connectors are available. Please call factory for ordering details.
05/24/2012
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
Page 3 of 4
DTEM1036 Series
C14, C8, & C6 Inlet Types
15~36 Watts, Single Outputs
Medical AC/DC Desktop Power Supplies
Rev. A
MECHANICAL DRAWING
Unit: inches (mm)
1.22±0.04 (31±1)
IEC-320-C14
IEC-320-C8
1.22±0.04 (31±1)
1.22±0.04 (31±1)
1.77±0.04 (45±1)
1.22±0.04 (31±1)
3.86±0.04 (98±1)
IEC-320-C6
COMPANY INFORMATION
Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development
engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008
certification is just one example of our commitment to producing a high quality, well-documented product for our customers.
Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working
closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to
provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss
your future projects.
Contact Wall Industries for further information:
Phone:
Toll Free:
Fax:
E-mail:
Web:
Address:
05/24/2012
(603)778-2300
(888)587-9255
(603)778-9797
[email protected]
www.wallindustries.com
5 Watson Brook Rd.
Exeter, NH 03833
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
Page 4 of 4
Similar pages