Coilcraft A01TKL Mini springâ ¢ air core inductor Datasheet

Document 107-1
Mini Spring™ Air Core Inductors
• Small air core inductors feature high Q and tight tolerances
• Acrylic jacket provides a flat top for pick and place
• Solder coated leads ensure reliable soldering
Designer’s Kit C302 contains 12 each of all 5% values.
Kit C302-2 contains12 each of all 2% values.
Terminations RoHS compliant tin-silver over copper. Other
terminations available at additional cost.
Ambient temperature –40°C to +125°C with Irms current, +125°C
to +140°C with derated current
Storage temperature Component: –40°C to +140°C.
Packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL) +5 to +70 ppm/°C
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
One per billion hours / one billion hours, calculated per Telcordia SR-332
Packaging A0xT: 700/7″ reel; 2500/13″ reel Plastic tape: 12 mm wide,
0.32 mm thick, 8 mm pocket spacing, 3.3 mm pocket depth
BxxT: 500/7″ reel; 2200/13″ reel Plastic tape: 16 mm wide, 0.28 mm
thick, 8 mm pocket spacing, 3.4 mm pocket depth
PCB washing Only pure water or alcohol recommended
SRF
DCR
Part
L2 Percent Q4 min5
max6 Irms7 Weight
1
3
number Turns (nH)
tol
min (GHz) (mOhm) (A)
(mg)
A01TKL_
1
2.5
10
145 12.5
1.1
4
31
A02T_L_
2
5.0
5,2
140
6.5
1.8
4
42
A03T_L_
3
8.0
5,2
140
5.0
2.6
4
52
A04T_L_
4
12.5
5,2
137
3.3
3.4
4
65
A05T_L_
5
18.5
5,2
132
2.5
3.9
4
78
B06T_L_
6
17.5
5,2
100
2.2
4.5
4
100
B07T_L_
7
22.0
5,2
102
2.1
5.2
4
110
B08T_L_
8
28.0
5,2
105
1.8
6.0
4
118
B09T_L_
9
35.5
5,2
112
1.5
6.8
4
133
B10T_L_
10
43.0
5,2
106
1.2
7.9
4
147
1. When ordering, please specify tolerance, termination and packaging codes:
A02TGLC
Tolerance: G = 2% J = 5% K = 10% (Table shows stock tolerances in bold.)
Termination: L = RoHS compliant tin-silver (96.5/3.5) over copper.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or
S = non-RoHS tin-lead (63/37).
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape,
700 (AxxT) or 500 (BxxT) parts per full reel.
B = Less than full reel. In tape, but not machine-ready. To have
a leader and trailer added ($25 charge), use code letter C
instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic tape.
Factory order only, not stocked, 2500 (AxxT) or 2200 (BxxT)
parts per full reel.
2. Inductance measured with an Agilent/HP 4286, a Coilcraft SMD-A and correlation.
3. Tolerances in bold are stocked for immediate shipment.
4. Q measured at 150 MHz using an Agilent/HP 4291A with an Agilent/HP 16193A
test fixture.
5. SRF tested on an Agilent/HP 8720D and a Coilcraft SMD-D test fixture.
6. DCR tested on the Cambridge Technology Model 510 Micro-ohmmeter.
7. Current that causes a 15°C temperature rise from 25°C ambient.
8. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
A
E
C
B
Size A max
A
0.155
3,94
B
F
B max
0.175
4,45
C max
0.124
3,15
D
E
0.125 ±0.010 0.115 ±0.010
3,18 ±0,25
2,92 ±0,25
F max
0.029
0,74
0.175
4,45
0.124
3,15
0.125 ±0.010 0.230 ±0.015
3,18 ±0,25
5,84 ±0,38
0.029
0,74
0.270
6,86
135°
Strip max
Length
0° min
Recommended Land Patterns
Size A
Size B
0.050
1,27
0.130
3,30
0.110
2,79
0.050
1,27
Dimensions are in
0.130
3,30
0.110
2,79
0.115
2,92
0.235
5,97
inches
mm
Specifications subject to change without notice.
Please check our website for latest information.
© Coilcraft, Inc. 2009
Encapsulant
D
Document 107-1
Revised 10/29/08
Document 107-2
Mini Spring™ Air Core Inductors
Typical L vs Frequency
25
60
43.0 nH
55
50
18.5 nH
Inductance (nH)
Inductance (nH)
20
15
12.5 nH
10
8.0 nH
5.0 nH
5
45
35.5 nH
40
35
28.0 nH
30
22.0 nH
25
20
2.5 nH
17.5 nH
15
0
10
100
200
400
600
1000
100
Frequency (MHz)
200
400
600
1000
Frequency (MHz)
Typical Q vs Frequency
135
220
130
2.5 nH
200
125
190
120
5.0 nH
180
170
8.0 nH
160
Q factor
Q factor
210
17.5 nH
22.0 nH
115
28.0 nH
35.5 nH
110
105
43.0 nH
12.5 nH
100
150
140
95
18.5 nH
90
130
100
200
400
600
1000
100
Frequency (MHz)
200
400
600
1000
Frequency (MHz)
Typical Irms Derating
120
110
90
80
70
60
50
40
30
25°C
Percent of rated Irms
100
20
10
0
-40
-20
0
20
40
60
80
100
120 140
Ambient temperature (°C)
Specifications subject to change without notice.
Please check our website for latest information.
© Coilcraft, Inc. 2009
Document 107-2
Revised 10/29/08
Similar pages