TRIAD FIT44-3 Switch mode/high frequency toroidal inductor Datasheet

Switchmode/High Frequency
Toroidal Inductor
FIT44-3
Description:
The FIT44-3 toroidal inductor is specifically designed to minimize transients.
It stores energy and therefore, conditions the output signal by leveling the current
waveform providing a more stable current supply. Generally used in high frequency
circuits, its standard design provides an economical solution in differential mode
applications or as an output inductor.
Electrical Specifications (@25C):
Min. Inductance (µH)
Rated
Max
No Bias
At Bias
DC Amps
DCR (mΩ)
12.30
7.75
4.0
23.4
Note: No Bias inductance measured at .25V, 10KHZ.
C
F
G (DIA.)
Dimensions:
A
B
C
D
E
F
G
.625
.350
.700
.250
.350
.125
.025±.003
A
Units: In inches
B
Weight: .008 lbs.
E
Technical Notes:
1. Nominal inductance values are typically 10% higher than minimal rating.
2. Biased inductance measured at rated DC amps.
3. Operation at rated current yields approximately 40°C temperature rise
over 20°C ambient.
LEADS TINNED TO
MTG SURFACE MIN.
D
RoHS Compliance: As of manufacturing date February 2005, all standard products
meet the requirements of 2011/65/EU, known as the RoHS initiative..
* Upon printing, this document is considered “uncontrolled”. Please contact Triad
Magnetics’ website for the most current version.
Web: www.TriadMagnetics.com
Phone 951-277-0757
Fax 951-277-2757
460 Harley Knox Blvd.
Perris, California 92571
Publish Date: December 4, 2013
Similar pages