IRSM505-044 IRSM515-044 Series 1.0Ω, 250V Integrated Power Module for Small Appliance Motor Drive Applications Description IRSM505-044 and IRSM515-044 are 3-phase Integrated Power Modules (IPM) designed for advanced appliance motor drive applications such as energy efficient fans and pumps. These advanced IPMs offers a combination of low RDS(on) Trench FREDFET technology and the industry benchmark half-bridge high voltage, rugged driver in a familiar package. The modules are optimized for low EMI characteristics. IRSM505-044 includes temperature feedback while IRSM515-044 does not. Features 250V 3-phase inverter including high voltage gate drivers Integrated bootstrap functionality Low 1.0Ω (max, 25°C) RDS(on) Trench FREDFET Under-voltage lockout for all channels Matched propagation delay for all channels Temperature feedback via NTC (IRSM505-044 only) Optimized dV/dt for loss and EMI trade offs Open-source for single and leg-shunt current sensing 3.3V logic compatible Driver tolerant to negative transient voltage (-Vs) Advanced input filter Rugged design for PM fan and pump motors Isolation 1900VRMS, 1min Standard Pack Base Part Number IRSM505-044 IRSM515-044 1 www.irf.com NTC Yes No Package Type Orderable Part Number Form Quantity SOP23 Tube 240 IRSM505-044PA DIP23 Tube 240 IRSM505-044DA DIP23A Tube 240 IRSM505-044DA2 SOP23 Tube 240 IRSM515-044PA DIP23 Tube 240 IRSM515-044DA DIP23A Tube 240 IRSM515-044DA2 © 2014 International Rectifier Submit Datasheet Feedback May 19, 2014 IRSM505-044 IRSM515-044 Series Internal Electrical Schematic 1 COM 17 V+ 1 COM 2 VB1 2 VB1 3 VCC1 3 VCC1 4 HIN1 18 U/V S1 Half-Bridge HVIC 5 LIN1 6 NC 19 V R1 Integrated in HVIC 7 VB2 20 V R2 8 VCC2 9 HIN2 Half-Bridge HVIC 10 LIN 2 21 V/VS 2 4 HIN1 5 LIN1 6 NC 18 U/V S1 Half-Bridge HVIC 19 V R1 Integrated in HVIC 7 VB2 20 V R2 8 VCC2 9 HIN2 10 LIN 2 11 VTH 17 V+ Half-Bridge HVIC 21 V/VS 2 11 NC 12 VB 3 12 VB 3 22 V R3 13 VCC3 14 HIN3 Half-Bridge HVIC 15 LIN 3 23 W/V S3 16 NC 22 V R3 13 VCC3 14 HIN3 15 LIN 3 Half-Bridge HVIC 23 W/V S3 16 NC IRSM505-044 IRSM515-044 Absolute Maximum Ratings Absolute maximum ratings indicate sustained limits beyond which damage to the module may occur. These are not tested at manufacturing. All voltage parameters are absolute voltages referenced to COM unless otherwise stated in the table. Symbol Description Min Max Unit BVDSS MOSFET Blocking Voltage --- 250 V IO @ TC=25°C DC Output Current per MOSFET --- 3.0 IOP @ TC =25°C Pulsed Output Current per MOSFET (Note 1) --- 15 Pd @ TC=25°C Maximum Power Dissipation per MOSFET --- 16 W VISO Isolation Voltage (1min) --- 1900 VRMS TJ Operating Junction Temperature -40 150 °C TC Operating Case Temperature -40 150 °C TS Storage Temperature -40 150 °C VS1,2,3 High Side Floating Supply Offset Voltage VB1,2,3 - 20 VB1,2,3 +0.3 V VB1,2,3 High Side Floating Supply Voltage -0.3 275 V VCC Low Side and Logic Supply voltage VIN Input Voltage of LIN, HIN A -0.3 25 V COM -0.3 VCC+0.3 V Note 1: Pulse Width = 100µs, Single Pulse 2 www.irf.com © 2014 International Rectifier Submit Datasheet Feedback May 19, 2014 IRSM505-044 IRSM515-044 Series Recommended Operating Conditions Symbol Description V+ Positive DC Bus Input Voltage VS1,2,3 High Side Floating Supply Offset Voltage VB1,2,3 High Side Floating Supply Voltage VCC Low Side and Logic Supply Voltage VIN Input Voltage of LIN, HIN, ITRIP, EN, FLT Min Max Unit --- 200 V (Note 2) 200 V VS+12 VS+20 V 13.5 16.5 V 0 5 V Fp PWM Carrier Frequency --20 Note 2: Logic operational for Vs from COM-8V to COM+250V. Logic state held for Vs from COM-8V to COM-VBS. kHz Static Electrical Characteristics (VCC-COM) = (VB-VS) = 15 V. TC = 25oC unless otherwise specified. The VIN and IIN parameters are referenced to COM and are applicable to all six channels. The VCCUV parameters are referenced to COM. The VBSUV parameters are referenced to VS. Symbol Description Min Typ Max Units Conditions BVDSS Drain-to-Source Breakdown Voltage 250 --- --- V TJ=25°C, ILK=250µA ILKH Leakage Current of High Side FET 0.5 µA TJ=25°C, VDS=250V ILKL Leakage Current of Low Side FET Plus Gate Drive IC 1 µA TJ=25°C, VDS=250V --- 0.8 1.0 Ω TJ=25°C, VCC=15V, Id=1.0A --- 1.8 --- Ω TJ=150°C, VCC=15V, Id=1.0A (Note 3) TJ=25°C, VCC=15V, ID=1.0A RDS(on) Drain to Source ON Resistance VSD Mosfet Body Diode Forward Voltage --- 0.8 --- V VIN,th+ Positive Going Input Threshold 2.2 --- --- V VIN,th- Negative Going Input Threshold --- --- 0.8 V VCCUV+, VBSUV+ VCC and VBS Supply Under-Voltage, Positive Going Threshold 8 8.9 9.8 V VCCUV-, VBSUV- VCC and VBS supply Under-Voltage, Negative Going Threshold 6.9 7.7 8.5 V VCCUVH, VBSUVH VCC and VBS Supply Under-Voltage Lock-Out Hysteresis --- 1.2 --- V IQBS Quiescent VBS Supply Current VIN=0V --- 42 60 µA IQBS, ON Quiescent VBS Supply Current VIN=4V --- 42 60 µA IQCC Quiescent VCC Supply Current VIN=0V --- 1.7 4 mA IQCC, ON Quiescent VCC Supply Current VIN=4V --- 1.8 4 mA IIN+ Input Bias Current VIN=4V --- 5.9 18 µA VIN=3.3V IIN- Input Bias Current VIN=0V --- --- 2 µA VIN=0V RBR Internal Bootstrap Equivalent Resistor Value --- 250 --- Ω TJ=25°C Note 3: Characterized, not tested at manufacturing 3 www.irf.com © 2014 International Rectifier Submit Datasheet Feedback May 19, 2014 IRSM505-044 IRSM515-044 Series Dynamic Electrical Characteristics (VCC-COM) = (VB-VS) = 15 V. TC = 25oC unless otherwise specified. Symbol Description Min Typ Max Units TON Input to Output Propagation Turn-On Delay Time --- 0.7 1.5 µs TOFF Input to Output Propagation Turn-Off Delay Time --- 0.8 1.5 µs TFIL,IN Input Filter Time (HIN, LIN) 200 300 --- ns DT Deadtime Inserted --- 400 --- ns EON Turn-on switching energy loss --- 11 --- µJ EOFF Turn-off switching energy loss --- 3 --- µJ EREC Recovery energy loss --- 3 --- µJ EON,150 Turn-on switching energy loss --- 15 --- µJ EOFF,150 Turn-off switching energy loss --- 4 --- µJ --- 5 --- µJ Conditions ID=120mA, V+=30V See Fig.1 EREC,150 Recovery energy loss Note 4: Characterized, not tested at manufacturing VIN=0 & VIN=3.3V VIN=0 & VIN=3.3V without external deadtime V+=150V, ID=0.5A, L=40mH, TC=25°C (Note 4) V+=150V, ID=0.5A, L=40mH, TC=150°C (Note 4) Thermal and Mechanical Characteristics Symbol Description Rth(J-C) Junction to Case Thermal Resistance Min Typ Max Units Conditions --- 7.9 --- °C/W High Side V-Phase Mosfet (Note 5) Note 5: Characterized, not tested at manufacturing. Case temperature (TC) point shown in Figure 2. Internal NTC – Thermistor Characteristics (IRSM505-044 Only) Symbol Description Min Typ Max Units R25 Resistance --- 47 --- kΩ TC=25°C, ±5% tolerance R125 Resistance --- 1.41 --- kΩ TC=125°C B B-constant (25-50°C) --- 4050 --- K ±2% tolerance (Note 6) -40 --- 125 °C Temperature Range Note 6: See application notes for usage 4 www.irf.com Conditions © 2014 International Rectifier Submit Datasheet Feedback May 19, 2014 IRSM505-044 IRSM515-044 Series Qualification Information† Qualification Level Industrial Moisture Sensitivity Level MSL3 RoHS Compliant Yes †† ††† Machine Model Class B Human Body Model Class 2 ESD † Qualification standards can be found at International Rectifier’s web site http://www.irf.com/ †† Higher qualification ratings may be available should the user have such requirements. Please contact your International Rectifier sales representative for further information. ††† SOP23 package only. Higher MSL ratings may be available for the specific package types listed here. Please contact your International Rectifier sales representative for further information. 5 www.irf.com © 2014 International Rectifier Submit Datasheet Feedback May 19, 2014 IRSM505-044 IRSM515-044 Series Module Pin-Out Description Pin 1 Name COM 2 VB1 High Side Floating Supply Voltage 1 3 VCC1 15V Supply 1 4 HIN1 Logic Input for High Side Gate Driver - Phase 1 5 LIN1 Logic Input for Low Side Gate Driver - Phase 1 6 NC Not Connected 7 VB2 High Side Floating Supply Voltage 2 8 VCC2 15V Supply 2 9 HIN2 Logic Input for High Side Gate Driver - Phase 2 10 Description Logic Ground LIN2 Logic Input for Low Side Gate Driver - Phase 2 VTH Thermistor Output (IRSM505-044DA) NC Not Connected (IRSM515-044DA) 12 VB3 High Side Floating Supply Voltage 3 13 VCC3 15V Supply 3 14 HIN3 Logic Input for High Side Gate Driver - Phase 3 15 LIN3 Logic Input for Low Side Gate Driver - Phase 3 16 NC Not Connected 17 V+ DC Bus Voltage Positive 18 U/VS1 Output - Phase 1, High Side Floating Supply Offset 1 19 VR1 Phase 1 Low Side Source 20 VR2 Phase 2 Low Side Source 21 V/VS2 Output - Phase 2, High Side Floating Supply Offset 2 22 VR3 Phase 3 Low Side Source 23 W/VS3 Output - Phase 3, High Side Floating Supply Offset 2 11 16 15 14 13 12 11 10 9 8 7 6 0 4 3 2 1 A 0123-412W IRSM505-044PA 23 22 21 20 19 www.irf.com 18 17 6 © 2014 International Rectifier Submit Datasheet Feedback May 19, 2014 IRSM505-044 IRSM515-044 Series Referenced Figures Figure 1a: Input to Output propagation turn-on delay time. Figure 1b: Input to Output propagation turn-off delay time. Figure 1c: Diode Reverse Recovery. Figure 1: Switching Parameter Definitions Figure 2: TC measurement point for Rth(j-C) 7 www.irf.com © 2014 International Rectifier Submit Datasheet Feedback May 19, 2014 IRSM505-044 IRSM515-044 Series Application Notes A basic application schematic is shown below. VB2 VB1 VB3 IRSM505-044 V B US 2M V CC X TA L0 X TA L1 S P D-RE F A IN2 HIN1 P WMV H HIN2 P WMWH HIN3 P WMUL LIN1 P WMV L LIN2 P WMWL + GA TE K ILL - A IN1 V DD V DDCA P U, VS1 V, VS2 W, VS3 LIN3 IRMCF171 Power Supply HVICs P WMUH 7.50k 3V IFB + V TH IFB - COM 6.04k IFB O VSS 1nF 7.68k 4.87k 0.25 Figure 3: Basic sensor-less motor drive circuit connection. Motor is connected to U, V, W A complete reference design board for running any permanent magnet motor via sensorless sinusoidal control is available. The board – photo below – features the µIPM™-DIP module and the iMotion™ digital control IC. Reference design kits are available on the International Rectifier website (irf.com > Design Resources > Reference Designs > Intelligent Power Modules) Figure 4: Reference design board featuring the µIPM™-DIP module and the iMotion™ IRMCF171 digital control IC 8 www.irf.com © 2014 International Rectifier Submit Datasheet Feedback May 19, 2014 IRSM505-044 IRSM515-044 Series Figures 5-6 show the typical current capability for this module at specified conditions. In all tests, the application board – the IRMCS1071-1-D reference board – was placed in a box to prevent cooling from ambient airflow. The figures represent current capability for the module as used without any heat sink. ∆TJA represents the difference in temperature between the junction of the high-side V-phase Mosfet and the ambient, measured 10cm above and 6cm away from the board. Ambient temperature kept within 28-29°C. 1000 900 RMS Phase Current (mA) 800 700 600 500 3-Phase Modulation 400 2-Phase modulation 300 200 100 0 6 8 10 12 14 Carrier Frequency (kHz) 16 18 20 Figure 5: Maximum sinusoidal phase current vs PWM switching frequency, no heat sink. Space Vector Modulation, V+=150V, TA=28°C, TJ=128°C 900 800 RMS Phase Current (mA) 700 600 500 3-Phase Modulation 400 2-Phase Modulation 300 200 100 0 6 8 10 12 14 Carrier Frequency (kHz) 16 18 20 Figure 6: Maximum sinusoidal phase current vs PWM switching frequency, no heat sink. Space Vector Modulation, V+=150V, TA=28°C, TJ=98°C 9 www.irf.com © 2014 International Rectifier Submit Datasheet Feedback May 19, 2014 IRSM505-044 IRSM515-044 Series The module contains an NTC – connected between COM and the VTH pin – which can be used to monitor the temperature of the module. The NTC is effectively a resistor whose value decreases as the temperature rises. The NTC resistance can be calculated at any temperature as follows: , where is 47kΩ and is 4050K An external resistor network is connected to the NTC, the simplest of which is one resistor pulled up to VCC as shown in Figure 3. The VTH vs NTC temperature, TTH curve for this configuration is shown in Figure 7 below. The min, typical and max curves result from the NTC having a ±5% tolerance on its resistance and ±2% tolerance on the B-parameter. Figure 8 shows the thermistor temperature, TTH plotted against the high-side V-phase junction temperature, TJ for a module without a heat sink. It is thus advisable to shut down the module when TTH reaches 125°C. 14.0 min 12.0 typical max 10.0 VTH (V) 8.0 6.0 4.0 2.0 0.0 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 TTH (°C) Figure 7: VTH vs TTH with VTH pin pulled up to VCC with a 7.50kΩ (1%, 100ppm) resistor. A 15V, 1% variation in VCC is assumed. 10 www.irf.com © 2014 International Rectifier Submit Datasheet Feedback May 19, 2014 IRSM505-044 IRSM515-044 Series 140 120 TTH (°C 100 80 60 40 20 0 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 TJ (°C) Figure 8: TTH vs TJ for a module without a heat sink. VCC=15.3V, R=7.50kΩ 11 www.irf.com © 2014 International Rectifier Submit Datasheet Feedback May 19, 2014 IRSM505-044 IRSM515-044 Series SOP23 Package Outline Dimensions in mm 12 www.irf.com © 2014 International Rectifier Submit Datasheet Feedback May 19, 2014 IRSM505-044 IRSM515-044 Series DIP23A Package Outline Dimensions in mm 13 www.irf.com © 2014 International Rectifier Submit Datasheet Feedback May 19, 2014 IRSM505-044 IRSM515-044 Series DIP23 Package Outline Dimensions in mm 14 www.irf.com © 2014 International Rectifier Submit Datasheet Feedback May 19, 2014 IRSM505-044 IRSM515-044 Series Top Marking A 0123-412P IRSM505-044PA Marking Code Date Code P = Pb Free; Y = Engineering Samples YWW format, where Y = least significant digit of the production year , WW = two digits representing the week of the production year Revision History Data and Specifications are subject to change without notice IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information 15 www.irf.com © 2014 International Rectifier Submit Datasheet Feedback May 19, 2014