ON L88M05T-E 17v, 5v / 0.5a low dropout voltage regulator Datasheet

Ordering number : EN5839C
L88M05T
Monolithic Linear IC
17V, 5V / 0.5A Low Dropout
Voltage Regulator
http://onsemi.com
Overview
The L88M05T is low dropout voltage regulator IC with output current of 0.5 A. Because they can operate with a low
input-output voltage difference, they contribute to smaller and more efficient set power supplies, and are optimum for
audio-visual and office automation equipment.
Functions
• Output voltage : 5V
• 500 mA output current
• Low minimum input-output voltage differential (0.4V typ) enables to save energy and miniaturize transformer size.
• Set size can be miniaturized with compact TP-3H power package.
• Surface mounting on board permits allowable power dissipation to be raised.
• Enhanced mount flexibility with range of formed products.
Specifications
Maximum Ratings at Ta = 25C
Parameter
Symbol
Conditions
Ratings
Unit
Input voltage
VIN max
18
V
Allowable power dissipation
Pd max
Ta ≤ 25°C, no heat sink
1
W
Tc = 25°C, with infinite heat sink
6.25
W
Thermal resistance (junction-atmosphere)
θj-a

125
C/W
20
C/W
Thermal resistance (junction-to-case)
θj-c
Operating temperature
Topr
20 to 85
C
Storage temperature
Tstg
55 to 150
C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating
Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.
TP3H
ORDERING INFORMATION
See detailed ordering and shipping information on page 8 of this data sheet.
Semiconductor Components Industries, LLC, 2014
February, 2014
21414HK 20070312-S00010,20060913-S00002/D3098HA(II) No.5839-1/8
L88M00T Series
Pin Assignment
Top view
Operating Conditions at Ta = 25 °C
Parameter
Input voltage
Symbol
Conditions
VIN
Output current
lOUT
Ratings
Unit
5.8 to 17
V
0 to 500
mA
Operating Characteristics at Tj = 25 °C, VIN = 8 V, IO = 500 mA, COUT = 100 μF, CIN = 1 μF,
see specified Test Circuit.
Output voltage
Parameter
Dropout voltage
Line regulation
Load regulation
Peak output current
Output short-circuit current
Quiescent current
Output noise voltage
Temperature coefficient of output voltage
Ripple rejection
Symbol
VOUT
VDROP1
VDROP2
ΔVOLN
ΔVOLD
lOP
lOSC
IQ1
IQ2
VNO
ΔVOUT/ΔTj
Rrej
Conditions
lO = 150 mA
5.8 V % VIN % 17 V
5 mA % IOUT % 500 mA
IOUT = 0
10 Hz % f % 100 kHz
Tj = 25 to 125 °C
f = 120 Hz, 6 V % VIN % 17 V
min
4.85
600
typ
5.0
0.4
0.2
10
30
900
100
2.0
24
40
±0.5
65
max
5.15
0.6
0.3
50
100
300
5.0
50
Unit
V
V
V
mV
mV
mA
mA
mA
mA
μVrms
mV/°C
dB
No.5839-2/8
L88M05T
Package Dimensions
unit : mm
IPAK / TP3H
CASE 369AF
ISSUE A
XXXXXXXXXX
YMDDD
2.6
XXXXX = Specific Device Code
Y = Year
M = Month
DDD = Additional Traceability Data
*This information is generic. Please refer to
device data sheet for actual part marking.
SOLDERING FOOTPRINT*
1.0
GENERIC
MARKING DIAGRAM*
(0.65)
may or may not be present.
(Unit: mm)
Package name
TP3H
1.45
NOTE: The measurements are not to guarantee but for reference only.
Through Hole Area
*For additional information on our Pb−Free strategy
and soldering details, please download the
ON Semiconductor Soldering and Mounting
Techniques Reference Manual, SOLDERRM/D.
No.5839-3/8
L88M00T Series
Reference voltage
Start-up circuit
Equivalent Circuit Block Diagram (Common to L88M00T Series)
Error
amp
Short circuit
protector
Thermal protector
Test Circuit (Common to L88M00T Series)
L88M00T
Notes: 1. To ensure operational stability, CIN and COUT should be placed as close to the IC as possible.
2. Because the output capacitor COUT is set at over 100 μF to prevent oscillation at low temperatures, a capacitor that
exhibits little change in capacity with temperature variations should be used (such as a tantalum capacitor).
3. When VIN is minus (–) and GND is plus (+) (reversed connection), excessive current flow will occur.
No.5839-4/8
Allowable power dissipation, Pd max – W
L88M00T Series
Pd max – Ta
Common for L88M00T Series
With infinite heat sink
Mounted on copper-clad
area of 2,000 mm2
Mounted on copper-clad
area 740 mm2
Mounted on copper-clad
area 180 mm2
Mounted on copper-clad
area 36 mm2
No heat sink
Ambient temperature, Ta – °C
1) The allowable power dissipation is 1.0 W (Ta = 25°C) with no fin attached, but when mounted on a hybrid IC board or printed
circuit board, high allowable power dissipation is achieved, despite the compact package.
The graph below depicts the relationship between the copper-clad area and allowable power dissipation when mounted on a
glass epoxy board (50 × 5 0 × 0.8 tmm3) with a copper thickness of 18 μm.
Allowable power dissipation, Pd max – W
Pd max – S
Common for L88M00T series
PCB
Copper-clad
area, S – (mm2)
Copper-clad area, S – mm2
2) Pd is the value for when the solder on the surface of the IC heat sink has melted completely and the surface mount is
horizontal.
3) Please be advised that the flow solder application system (full-heat method) cannot be recommended.
Lead Formings
LR forming
FA forming
No.5839-5/8
L88M00T Series
VO – VIN
Output voltage, VO – V
Output voltage, VO – V
VO – VIN
Input voltage, VIN – V
VO – VIN
Input voltage, VIN – V
VDROP – IO
Output voltage, VO – V
Dropout voltage, VDROP – V
Common for L88M00T Series
Output current, IO – A
VO – IO
Output voltage, VO – V
Output voltage, VO – V
Input voltage, VIN – V
VO – I O
Output current, IO – A
VO – IO
Output voltage, VO – V
Quiescent current, IQ – mA
Output current, IO – A
IQ – VIN
Output current, IO – A
Input voltage, VIN – V
No.5839-6/8
L88M00T Series
VO – Ta
Output voltage, VO – V
Quiescent current, IQ – mA
IQ – IO
Ambient temperature, Ta – °C
IQ – Ta
Output voltage, VO – V
Quiescent current, IQ – mA
Output current, IO – A
VO – Ta
Ambient temperature, Ta – °C
Rrej – f
Common for L88M00T Series
Ambient temperature, Ta – °C
Ripple rejection, Rrej – dB
Peak output current, IOP – A
Output short-circuit current, IOSC – A
Ambient temperature, Ta – °C
IOP, IOSC – Ta
Frequency, f – Hz
No.5839-7/8
L88M05T
ORDERING INFORMATION
Device
L88M05T-E
Package
TP3H
(Pb-Free)
Shipping (Qty / Packing)
L88M05TL-FA-E
TP3H
(Pb-Free)
500 / Bulk Bag
L88M05TLL-E
TP3H
(Pb-Free)
500 / Bulk Bag
L88M05TL-LR-E
TP3H
(Pb-Free)
500 / Bulk Bag
L88M05TL-TL-E
TP3H
(Pb-Free)
700 / Tape & Reel
L88M05T-TL-E
TP3H
(Pb-Free)
700 / Tape & Reel
500 / Bulk Bag
ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at
www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no
warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the
application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental
damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual
performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical
experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use
as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in
which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for
any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors
harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or
death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the
part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PS No.5839-8/8
Similar pages