ETC2 DCDM9SSB Dura-con high reliability all-plastic Datasheet

DURA-CON
All-Plastic
Strip Connectors
Metal Shell
Mil-C-83513 Connectors
Terminal Blocks
Microedge
.050" D-microminiature
Dura-Con
Introduction
Cinch Dura-ConTM connectors are designed for applications that require a rugged, durable, and high-performance interconnect.
Dura-Con is the ideal connector for applications where weight and space must be kept to a minimum while maintaining maximum
reliability. Miniaturized airborne electronics and data processing equipment, where shorter signal paths are needed, represent
typical applications for these unique connectors.
The heart of the Dura-Con system is the Dura-Con pin contact. The Cinch Dura-Con pin contact is made from a precision miniature spring cable with a welded tip. The expanded cable provides seven spring members peripherally around the pin so that contact is maintained with the mating socket wall no matter what radial forces are applied. This spring may be flexed many times
without any evidence of metal fatigue. Reliable mating is further ensured by protecting the pin contact in a tightly toleranced
recessed cavity.
Cinch’s family of Dura-Con connectors includes MIL-C-83513 Series connectors along with our own commercial equivalents.
The commercial Dura-Con product line offers an expanded range of termination and hardware options for all-plastic and metal
shell wire versions and right-angle and straight PC board mount “terminal blocks”. Cinch also packages the Dura-Con contact
in a very low profile plastic strip connector on .050" centers and in a line of high-density microminiature edge (Microedge) board
connectors that meet the requirements of MIL-C-55302. Cinch has created a line of plastic and metal shell Dura-Con
connector savers for very high mating cycle applications such as test equipment.
Termination Options:
Cinch offers the following termination methods for its Dura-Con connectors:
Insulated Wire - Insulated wire is crimped to the Dura-Con contacts then epoxy backpotted at the factory. Wire is available in
standard lengths of 18, 24, 36, and 48 inches.
Uninsulated Wire - 24 AWG, gold-plated, uninsulated wire is crimped to the Dura-Con contact at the factory. Wire is available in
standard lengths of 0.5, 1.0, and 2.0 inches. This option allows the user greater flexibility when installing the connector.
Solder Cup - For applications that require the lowest contact resistance, Cinch offers Dura-Con connectors with solder cups for
termination by the user.
5
Dura-Con is a trademark of Cinch Connectors.
5-1
Call Toll Free: 1 (800) 323-9612
Dura-Con
Introduction
Custom Capabilities:
Standard Cinch Dura-Con connectors satisfy a wide variety of applications. Cinch’s line of Dura-Con D-microminiature
connectors is one of the most versatile in the industry. There are over 50,000 possible combinations of Cinch standard options
such as connector type, size, materials, hardware, and termination.
When special application requirements arise, Cinch Dura-Con connectors take this versatility to the next level. Whether specific
needs entail new variations of simple end-to-end connector assemblies or more complex and intricate harness assemblies,
Cinch Connector Division has the state-of-the-art engineering resources and research facilities in place to meet your needs.
Cinch approaches your business with a well-defined goal: to ensure the integrity of your design and to execute our contribution to
it in a responsible, cost-effective manner. This philosophy has led Cinch to a position of industry leadership.
For complete information regarding the total capabilities of the Dura-Con connector series, or for custom application assistance,
contact your nearest Cinch Connectors sales office.
5
Call Toll Free: 1 (800) 323-9612
5-2
Dura-Con
High Reliability
All-Plastic
.050" (1.27mm) Density
Solder Cup/Wire
D-Microminiature
■ Both plug and socket available in 9, 15, 21, 25, 31, 37, and 51 positions.
FEATURES
■ Termination styles - solder cup, gold-plated solid wire, and insulated
stranded wire.
■ Several styles of mounting hardware are available for cable-to-cable,
cable-to-board mount, and cable-to-panel mount applications.
■ High-performance Dura-Con twist-pin contact.
■ Economical all-plastic shell for lightweight applications where no
shielding is required.
MECHANICAL
ELECTRICAL
ENVIRONMENTAL
MATERIALS
■ Meets requirements of MIL-C-83513 except where noted.
Insulator: UL94V-0 rated glass-filled polyester
Contacts: Pins - Copper alloy, Sockets - Copper alloy (machined)
Contact Plating: .000050 in gold
Operating Temperature: -55° C to +135° C
Current Rating:
Withstanding Voltage:
Contact Resistance:
3 Amps maximum
600 VAC RMS @ sea level
8 milliohms maximum change
Individual Contact: 6 oz. (170.40 g) maximum insertion;
0.5 oz. (14.20 g) minimum withdrawal
Mating / Unmating Force: See table
Call Toll Free: 1 (800) 323-9612
5-4
No. of
Contacts
9
15
21
25
31
37
51
Maximum
Mating Force
Lb.
Kg
5.63
2.56
9.38
4.26
13.13
5.96
15.63
7.10
19.38
8.80
23.13
10.50
31.88
14.47
Minimum
Unmating Force
Lb.
Kg
.28
.13
.47
.21
.66
.30
.78
.35
.97
.44
1.16
.53
1.59
.72
Dura-Con
High Reliability
All-Plastic
.050" (1.27mm) Density
Solder Cup/Wire
D-Microminiature
Contact Arrangements
(Face view of pin insulator)
(Use reverse order for socket)
Ordering Information
DC D A 37 P 6 E 2 -18.0 K
Cinch Dura-Con D Connector
Mounting Hardware**
B = No Hardware
F = Float Mount
R = Reverse Float Mount
K = Jackscrew (Standard)
L = Jackscrew (Low Profile)
P = Jackpost, MIL-C-83513/5-07
Insulator Type
*D = Thermoplastic
Glass Reinforced
Mounting Type
*A = Screw Mount Flange
Lead Length in inches***
00.5 Solid copper wire only
01.0 Solid copper wire only
02.0 Solid copper wire only
18.0 Stranded wire only
24.0 Stranded wire only
36.0 Stranded wire only
48.0 Stranded wire only
No. of Contacts
9, 15, 21, 25, 31, 37, 51
Contact Type
P – Pin (Plug)
S – Socket (Receptacle)
Wire Size in AWG
5 = 25 AWG Solid Copper
6 = 26 AWG Stranded
S = Solder Cup (Skip to Mounting Hardware)
Insulation
Color or Wire Finish
1 = White
*2 = Yellow (Stranded Wire)
3 = Tin-Plated
*4 = Gold-Plated (Solid Wire Only)
*5 = Color Coded Per MIL-Std. (681)
System 1. (Stranded Wire Only)
Wire Type
E = MIL-W-16878/4, 7 Strand
C = Solid Copper - Uninsulated
(Consult factory for non-standard wire types)
* - Indicates Cinch std. option.
** - See p. 5-12 for std. hardware dims. See p. 5-13 for non-std. hardware & p. 5-31 for Mil spec. hardware both sold separately.
***- Length Tolerance: solid wire = ± 3/32”, standard wire = ± 1/4”.
5-5
Call Toll Free: 1 (800) 323-9612
Dura-Con
High Reliability
All-Plastic
.050" (1.27mm) Density
Solder Cup/Wire
D-Microminiature
Connector Dimensions - Plastic Shell
Plug
Socket
5
A
No. of
Contacts
B Max.
+ .010 (.254)
in
mm
in
D
E
+.005 (.127)
in
mm
F Max.
+.010 (.254)
in
mm
in
mm
7.42
.398
10.11
.565
14.35
.208
5.28
.173
4.39
.376
9.55
.398
10.11
.565
14.35
.208
5.28
.173
4.39
.442
11.23
.548
13.92
.715
18.16
.208
5.28
.173
4.39
23.57
.526
13.36
.548
13.92
.715
18.16
.208
5.28
.173
4.39
1.078
27.38
.592
15.04
.698
17.73
.865
21.97
.208
5.28
.173
4.39
21 Socket
1.078
27.38
.676
17.17
.698
17.73
.865
21.97
.208
5.28
.173
4.39
25 Plug
1.178
29.92
.692
17.58
.798
20.27
.965
24.51
.208
5.28
.173
4.39
25 Socket
1.178
29.92
.776
19.71
.798
20.27
.965
24.51
.208
5.28
.173
4.39
31 Plug
1.328
33.73
.842
21.39
.948
24.08
1.115
28.32
.208
5.28
.173
4.39
31 Socket
1.328
33.73
.926
23.52
.948
24.08
1.115
28.32
.208
5.28
.173
4.39
37 Plug
1.478
37.54
.992
25.20
1.098
27.89
1.265*
32.13
.208
5.28
.173
4.39
37 Socket
1.478
37.54
1.076
27.33
1.098
27.89
1.265*
32.13
.208
5.28
.173
4.39
51 Plug
1.428
36.27
.942
23.93
1.048
26.62
1.215
30.86
.250
6.35
.220
5.59
51 Socket
1.428
36.27
1.026
26.06
1.048
26.62
1.215
30.86
.250
6.35
.220
5.59
9 Plug
.778
19.76
.292
9 Socket
.778
19.76
15 Plug
.928
23.57
15 Socket
.928
21 Plug
Call Toll Free: 1 (800) 323-9612
mm
C
+.010 (.254)
-.018 (.457)
in
mm
5-6
Dura-Con
High Reliability
All-Plastic
.050" (1.27mm) Density
Solder Cup/Wire
D-Microminiature
Panel Mounting Dimensions
Panel Cutout Dimensions
Figure 1. Front Mounting
Figure 3. Edgeboard Mounting
Figure 2. Rear Mounting
A
No. of
Contacts
9
15
21
25
31
37
51
Figure
Number
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
+.004
-.000
in
.408
.373
.558
.523
.708
.674
.808
.774
.958
.924
1.108
1.074
1.058
1.024
-
B
(.101)
(.000)
mm
10.36
9.47
14.17
13.28
17.98
17.12
20.52
19.66
24.33
23.47
28.14
27.28
26.87
26.01
-
5-7
+.004
-.000
in
.172
.216
.172
.216
.172
.216
.172
.216
.172
.216
.172
.216
.215
.259
-
C
(.101)
(.000)
mm
4.37
5.49
4.37
5.49
4.37
5.49
4.37
5.49
4.37
5.49
4.37
5.49
5.46
6.58
-
+.005
-.000
in
.570
.570
.570
.720
.720
.720
.870
.870
.870
.970
.970
.970
1.120
1.120
1.120
1.270
1.270
1.270
1.220
1.220
1.220
(.127)
(.000)
mm
14.48
14.48
14.48
18.29
18.29
18.29
22.10
22.10
22.10
24.64
24.64
24.64
28.45
28.45
28.45
32.26
32.26
32.26
30.99
30.99
30.99
Call Toll Free: 1 (800) 323-9612
5
Dura-Con
High Reliability
Metal Shell
.050" (1.27mm) Density
Solder Cup/Wire
D-Microminiature
■ Both plug and socket available in 9, 15, 21, 25, 31, 37, 51, and 100 positions.
FEATURES
■ Several styles of mounting are available for cable-to-cable, cable-to-panel
mount, and cable-to-board mount.
■ Aluminum shell provides extra strength and EMI/RFI shielding capability.
Plating options available.
■ Silicone elastomer compression interfacial seal protects contacts from
moisture and humidity and isolates contacts from each other and the
metal shell.
■ Meets requirements of MIL-C-83513 except where noted.
■ Rugged twist-pin contacts resistant to shock and vibration make metal
shell Dura-Con an excellent choice for harsh environments such as airborne
or space applications.
MATERIALS
Insulator: UL94V-0 rated glass-filled polyester or diallyl phthalate
Contacts: Pins - Copper alloy, Sockets - Copper alloy (machined)
Contact Plating: .000050 in gold
Shell: Aluminum alloy
Shell Plating: Yellow chromate over cadmium (std.) or
MECHANICAL
ELECTRICAL
ENVIRONMENTAL
electroless nickel
Operating Temperature: -55°C to +135°C
Current Rating:
Withstanding Voltage:
Contact Resistance:
3 Amps maximum
600 VAC RMS @ sea level
8 milliohms maximum
Individual Contact: 6 oz. (170.40 g) maximum insertion;
0.5 oz. (14.20 g) minimum withdrawal
Mating / Unmating Force: See table
Call Toll Free: 1 (800) 323-9612
5-8
No. of
Contacts
9
15
21
25
31
37
51
100
Maximum
Mating Force
Lb.
Kg
5.63
2.56
9.38
4.26
13.13
5.96
15.63
7.10
19.38
8.80
23.13
10.50
31.88
14.47
62.50
28.38
Minimum
Unmating Force
Lb.
Kg
.28
.13
.47
.21
.66
.30
.78
.35
.97
.44
1.16
.53
1.59
.72
3.13 1.42
Dura-Con
High Reliability
Metal Shell
.050" (1.27mm) Density
Solder Cup/Wire
D-Microminiature
Contact Arrangements
(Face view of pin insert)
(Use reverse order for socket side)
Ordering Information
DC D M 37 P 6 E 2-18.0 K N
Cinch Dura-Con D Connector
Shell Plating
*No Letter = Yellow Chromate
over Cadmium
N = Electroless Nickel
Insulator Type
C = Diallyl Phthalate
Glass-Reinforced
D = Thermoplastic
Glass-Reinforced
Mounting Hardware**
B = No Hardware
F = Float Mount
R = Reverse Float Mount
K = Jackscrew (Standard)
L = Jackscrew (Low Profile)
P = Jackpost, Size 9 through 51
MIL-C-83513/5-07
Size 100 MIL-C-83513/5-17
Mounting Type
M = Screw Mount Metal Shell
No. of Contacts
9, 15, 21, 25, 31, 37, 51, 100
Contact Type
P = Pin (Plug)
S = Socket (Receptacle)
Lead Length in inches***
00.5 Solid copper wire only
01.0 Solid copper wire only
02.0 Solid copper wire only
18.0 Stranded wire only
24.0 Stranded wire only
36.0 Stranded wire only
48.0 Stranded wire only
Wire Size in AWG
5 = 25 AWG Solid Copper
6 = 26 AWG Stranded
S = Solder cup
(Skip to Mounting Hardware)
Insulation
Color or Wire Finish
1 = White
*2 = Yellow (Stranded Wire)
3 = Tin-Plated
*4 = Gold-Plated (Solid Wire)
*5 = Color Coded Per MIL-Std.
681, System 1. (Stranded
Wire Only)
Wire Type
C = Solid Copper (Uninsulated)
E = MIL-W-16878/4, 7 Strand
(Consult factory for non-standard wire types)
* - Indicates Cinch std. option.
** - See p. 5-12 for std. hardware dims. See p. 5-13 for non-std. hardware & p. 5-31 for Mil spec. hardware both sold separately.
***- Length Tolerance: solid wire = ± 3/32”, standard wire = ± 1/4”.
5-9
Call Toll Free: 1 (800) 323-9612
Dura-Con
High Reliability
Metal Shell
.050" (1.27mm) Density
Solder Cup/Wire
D-Microminiature
Connector Dimensions - Metal Shell
Plug
Socket
A
5
B Max.
No. of
Contacts
9 Plug
+ .010 (.254)
in
mm
.775
19.68
in
.333
mm
8.46
C
+.010 (.254)
-.018 (.457)
in
mm
.390
9.91
9 Socket
.775
19.68
.396
10.06
.390
9.91
.565
14.35
.298
7.57
.270
6.86
15 Plug
.925
23.50
.483
12.27
.540
13.72
.715
18.16
.298
7.57
.270
6.86
15 Socket
.925
23.50
.546
13.87
.540
13.72
.715
18.16
.298
7.57
.270
6.86
21 Plug
1.075
27.30
.633
16.08
.690
17.53
.865
21.97
.298
7.57
.270
6.86
21 Socket
1.075
27.30
.696
17.68
.690
17.53
.865
21.97
.298
7.57
.270
6.86
25 Plug
1.175
29.84
.733
18.62
.790
20.07
.965
24.51
.298
7.57
.270
6.86
25 Socket
1.175
29.84
.796
20.22
.790
20.07
.965
24.51
.298
7.57
.270
6.86
31 Plug
1.325
33.66
.883
21.16
.940
23.88
1.115
28.32
.298
7.57
.270
6.86
31 Socket
1.325
33.66
.946
24.03
.940
23.88
1.115
28.32
.298
7.57
.270
6.86
37 Plug
1.475
37.46
1.033
26.24
1.090
27.69
1.265
32.13
.298
7.57
.270
6.86
37 Socket
1.475
37.46
1.096
27.84
1.090
27.69
1.265
32.13
.298
7.57
.270
6.86
51 Plug
1.425
36.20
.983
24.97
1.040
26.42
1.215
30.86
.341
8.66
.310
7.87
51 Socket
1.425
36.20
1.046
26.57
1.040
26.42
1.215
30.86
.341
8.66
.310
7.87
100 Plug
2.160
54.86
1.383
35.13
1.432
36.38
1.800
45.71
.384
9.75
.360
9.15
100 Socket
2.160
54.86
1.446
36.73
1.432
36.38
1.800
45.71
.384
9.75
.360
9.15
Call Toll Free: 1 (800) 323-9612
5-10
D
E
F Max.
+ .005 (.127)
in
mm
.565
14.35
+ .010 (.254)
in
mm
.298
7.57
in
.270
mm
6.86
Dura-Con
High Reliability
Metal Shell
.050" (1.27mm) Density
Solder Cup/Wire
D-Microminiature
Panel Mounting Dimensions
Panel Cutout Dimensions
A
No. of
Contacts
9
15
21
25
31
37
51
100
Figure
Number
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
+.004
-.000
in
.408
.408
.558
.558
.708
.708
.808
.808
.958
.958
1.108
1.108
1.058
1.058
1.450
1.562
-
B
(.101)
(.000)
mm
10.36
10.36
14.17
14.17
17.98
17.98
20.52
20.52
24.33
24.33
28.14
28.14
26.87
26.87
36.84
39.68
-
+.004
-.000
in
.270
.256
.270
.256
.270
.256
.270
.256
.270
.256
.270
.256
.315
.300
.361
.338
-
5-11
C
(.101)
(.000)
mm
6.86
6.50
6.86
6.50
6.86
6.50
6.86
6.50
6.86
6.50
6.86
6.50
8.00
7.62
9.17
8.58
-
+.005
-.000
in
.570
.570
.570
.720
.720
.720
.870
.870
.870
.970
.970
.970
1.120
1.120
1.120
1.270
1.270
1.270
1.220
1.220
1.220
1.805
1.805
1.805
D
(.127)
(.000)
mm
14.48
14.48
14.48
18.29
18.29
18.29
22.10
22.10
22.10
24.64
24.64
24.64
28.45
28.45
28.45
32.26
32.26
32.26
30.99
30.99
30.99
45.86
45.86
45.86
+.005
-.000
in
.089
.089
.089
.089
.089
.089
.089
.117
.117
.117
(1.27)
(.000)
mm
2.26
2.26
2.26
2.26
2.26
2.26
2.26
2.97
2.97
2.97
Call Toll Free: 1 (800) 323-9612
5
Dura-Con
High Reliability
Mounting Hardware
.050" (1.27mm) Density
Solder Cup/Wire
D-Microminiature
Mounting Hardware
For Plastic & Metal Shell
Dura-Con Connectors
Option “R”
Option “F”
5
Option “L”
Option “K”
Option “P”
Call Toll Free: 1 (800) 323-9612
5-12
Dura-Con
High Reliability
Mounting Hardware
.050" (1.27mm) Density
Solder Cup/Wire
D-Microminiature
P/N: DCSL1
Purchased Separately
Jackpost - Rear Panel Mount
(Purchased Separately)
Panel Cutout Dimensions
(Plug & Receptacle)
Jackpost
Part
Number
DCJPRM094
DCJPRM063
DCJPRM047
DCJPRM031
Part
Number
(by Shell
Size)
9
15
21
25
31
37
51
100
Panel Thickness
in
mm
.094
2.5
.063
1.6
.047
1.2
.031
0.8
A
+.004 (.101)
-.000 (.000)
in
mm
.398
10.11
.548
13.92
.698
17.73
.798
20.27
.948
24.08
1.098
27.89
1.048
26.62
1.448
36.78
5-13
A Dimension
in
mm
.092/.087
2.34/2.21
.061/.056
1.55/1.42
.047/.042
1.19/1.07
.030/.025
0.76/0.64
B
+.004 (.101)
-.000 (.000)
in
mm
.249
6.32
.249
6.32
.249
6.32
.249
6.32
.249
6.32
.249
6.32
.292
7.42
.336
8.53
C
+.005 (.127)
in
mm
.565
14.35
.715
18.16
.865
21.97
.965
24.51
1.115
28.34
1.265
32.13
1.215
30.86
1.800
45.72
Call Toll Free: 1 (800) 323-9612
5
Dura-Con
High Reliability
Metal Shell
.050" (1.27mm) Density
PCB Mount Terminal Block
■ Plug & socket versions available in 9, 15, 21, 25, 31, 37, 51, and 100 positions.
■ Flow-through design facilitates inspection and cleaning after soldering.
FEATURES
■ All terminal block connectors use standard mounting hardware.
■ Metal shell provides EMI/RFI shielding capability.
■ Available in 3 styles: Straight mount, 90° right-angle mount, and 90° rightangle narrow profile mounting.
■ Silicone elastomer interfacial seal protects contacts from moisture and
isolates them from each other and from the metal shell.
■ Meets requirements of MIL-C-83513.
■ Choice of insulator materials.
ELECTRICAL
ENVIRONMENTAL
MATERIALS
Insulator: UL94V-0 glass-filled polyester or diallyl phthalate
Contacts: Pins - Copper alloy, Sockets - Copper alloy (machined)
Contact Plating: .000050 in gold
Shell: Aluminum alloy
Shell Plating: Yellow chromate over cadmium (std.) or
electroless nickel
Operating Temperature: -55°C to +135°C
Current Rating:
Withstanding Voltage:
Contact Resistance:
3 Amps maximum
600 VAC RMS @ sea level, 150 VAC
@ 70,000 ft.
8 milliohms maximum
MECHANICAL
Insulation Resistance: 1,000 megohms min between adjacent pins
Individual Contact: 6 oz. (170.40 g) maximum insertion force;
0.5 oz. (14.20 g) minimum withdrawal force
Mating / Unmating Forces: See table
Call Toll Free: 1 (800) 323-9612
5-14
No. of
Contacts
9
15
21
25
31
37
51
100
Maximum
Mating Force
Lb.
Kg
5.63
2.56
9.38
4.26
13.13
5.96
15.63
7.10
19.38
8.80
23.13
10.50
31.88
14.47
62.50
28.38
Minimum
Unmating Force
Lb.
Kg
.28
.13
.47
.21
.66
.30
.78
.35
.97
.44
1.16
.53
1.59
.72
3.13 1.42
Dura-Con
High Reliability
Metal Shell
.050" (1.27mm) Density
PCB Mount Terminal Block
Contact Arrangements
Ordering Information
DC D M 25 S BR -- -Shell Finish*
No Letter = Standard Yellow
Chromate over Cadmium
N = Electroless Nickel
Cinch Dura-Con D
Connector
Insulator Type
C = Diallyl Phthalate
Glass Reinforced
D = Thermoplastic
Glass Reinforced
Hardware*
No Letter = Less Hardware
P = Jackpost
Termination Style
BR = 90° PCB
BS = Straight 180° PCB
CBR = 90° Narrow Profile PCB
Mounting Type
M = Screw Mount Metal Shell
No. of Contacts
9, 15, 21, 25, 31, 37, 51, & 100
Contact Type
P = Pin (Plug)
S = Socket (Receptacle)
* For other options consult factory.
5-15
Call Toll Free: 1 (800) 323-9612
Dura-Con
High Reliability
Metal Shell
.050" (1.27mm) Density
PCB Mount Terminal Block
Recommended Board Layout
Typ. Hole Dia. = .040" (1.02 mm)
NOTE: For additional connector dimensions, see page 5-10.
5
A
Max.
No. of
Contacts
in
mm
9 Plug
9 Socket
15 Plug
15 Socket
21 Plug
21 Socket
25 Plug
25 Socket
31 Plug
31 Socket
37 Plug
37 Socket
51 Plug
51 Socket
100 Plug
100 Socket
1.390
1.390
1.540
1.540
1.690
1.690
1.790
1.790
2.040
2.040
2.340
2.340
1.875
1.875
2.780
2.780
35.31
35.31
39.12
39.12
42.93
42.93
45.47
45.47
51.82
51.82
59.44
59.44
47.63
47.63
70.61
70.61
No. of
Contacts
9 Plug
9 Socket
15 Plug
15 Socket
21 Plug
21 Socket
25 Plug
25 Socket
31 Plug
31 Socket
37 Plug
37 Socket
51 Plug
51 Socket
100 Plug
100 Socket
B
+ .007 (0.18)
in
mm
1.150
1.150
1.300
1.300
1.450
1.450
1.550
1.550
1.800
1.800
2.100
2.100
1.600
1.600
2.500
2.500
G
Max.
in
.308
.308
.308
.308
.308
.308
.308
.308
.308
.308
.308
.308
.351
.351
.394
.394
mm
7.82
7.82
7.82
7.82
7.82
7.82
7.82
7.82
7.82
7.82
7.82
7.82
8.92
8.92
10.00
10.00
29.21
29.21
33.02
33.02
36.83
36.83
39.37
39.37
45.72
45.72
53.34
53.34
40.64
40.64
63.50
63.50
H
Max.
in
.190
.200
.190
.200
.190
.200
.190
.200
.190
.200
.190
.200
.190
.200
.190
.200
Call Toll Free: 1 (800) 323-9612
mm
4.83
5.08
4.83
5.08
4.83
5.08
4.83
5.08
4.83
5.08
4.83
5.08
4.83
5.08
4.83
5.08
C
+ .005 (0.13)
in
mm
.565
.565
.715
.715
.865
.865
.965
.965
1.115
1.115
1.265
1.265
1.215
1.215
1.800
1.800
14.35
14.35
18.16
18.16
21.97
21.97
24.51
24.51
28.32
28.32
32.13
32.13
30.86
30.86
45.72
45.72
J
+ .005 (0.13)
in
mm
.096
2.44
.096
2.44
.096
2.44
.096
2.44
.096
2.44
.096
2.44
.096
2.44
.096
2.44
.096
2.44
.096
2.44
.096
2.44
.096
2.44
.096
2.44
.096
2.44
.125
3.18
.125
3.18
5-16
F
Max.
in
mm
.465
.465
.465
.465
.465
.465
.465
.465
.465
.465
.465
.465
.565
.565
.765
.765
11.81
11.81
11.81
11.81
11.81
11.81
11.81
11.81
11.81
11.81
11.81
11.81
14.35
14.35
19.43
19.43
K
+ .015
in
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.225
.225
mm
3.18
3.18
3.18
3.18
3.18
3.18
3.18
3.18
3.18
3.18
3.18
3.18
3.18
3.18
5.72
5.72
Dura-Con
High Reliability
Metal Shell
.050" (1.27mm) Density
PCB Mount Terminal Block
Straight (180°) Termination
Recommended Board Layout
Typ. Hole Dia. = .040" (1.02 mm)
NOTE: For additional connector dimensions, see page 5-10.
No. of
Contacts
9 Plug
9 Socket
15 Plug
15 Socket
21 Plug
21 Socket
25 Plug
25 Socket
31 Plug
31 Socket
37 Plug
37 Socket
51 Plug
51 Socket
100 Plug
100 Socket
No. of
Contacts
9 Plug
9 Socket
15 Plug
15 Socket
21 Plug
21 Socket
25 Plug
25 Socket
31 Plug
31 Socket
37 Plug
37 Socket
51 Plug
51 Socket
100 Plug
100 Socket
A
Max.
in
1.390
1.390
1.390
1.390
1.690
1.690
1.740
1.740
2.040
2.040
2.340
2.340
2.270
2.270
3.070
3.070
mm
35.31
35.31
35.31
35.31
42.93
42.93
44.20
44.20
51.82
51.82
59.44
59.44
57.66
57.66
77.98
77.98
H
Max.
in
.190
.200
.190
.200
.190
.200
.190
.200
.190
.200
.190
.200
.190
.200
.190
.200
mm
4.83
5.08
4.83
5.08
4.83
5.08
4.83
5.08
4.83
5.08
4.83
5.08
4.83
5.08
4.83
5.08
B
+ .007 (0.18)
in
mm
1.150
29.21
1.150
29.21
1.150
29.21
1.150
29.21
1.450
36.83
1.450
36.83
1.500
38.10
1.500
38.10
1.800
45.72
1.800
45.72
2.100
53.34
2.100
53.34
2.000
50.80
2.000
50.80
2.800
71.12
2.800
71.12
J
+ .005 (0.13)
in
mm
.096
2.44
.096
2.44
.096
2.44
.096
2.44
.096
2.44
.096
2.44
.096
2.44
.096
2.44
.096
2.44
.096
2.44
.096
2.44
.096
2.44
.096
2.44
.096
2.44
.125
3.18
.125
3.18
C
+ .005 (0.13)
in
mm
.565
14.35
.565
14.35
.715
18.16
.715
18.16
.865
21.97
.865
21.97
.965
24.51
.965
24.51
1.115
28.32
1.115
28.32
1.265
32.13
1.265
32.13
1.215
30.86
1.215
30.86
1.800
45.72
1.800
45.72
D
Max.
in
.885
.885
.945
.945
1.185
1.185
1.275
1.275
1.575
1.576
1.875
1.875
1.775
1.775
2.585
2.585
K
Max.
in
.165
.165
.165
.165
.165
.165
.165
.165
.165
.165
.165
.165
.165
.165
.300
.300
5-17
mm
4.19
4.19
4.19
4.19
4.19
4.19
4.19
4.19
4.19
4.19
4.19
4.19
4.19
4.19
7.62
7.62
G
Max.
mm
22.48
22.48
24.0
24.0
30.09
30.09
32.38
32.38
40.00
40.00
47.62
47.62
45.08
45.08
65.55
65.65
in
.308
.308
.308
.308
.308
.308
.308
.308
.308
.308
.308
.308
.351
.351
.455
.455
mm
7.75
7.75
7.75
7.75
7.75
7.75
7.75
7.75
7.75
7.75
7.75
7.75
8.92
8.92
11.56
11.56
L
Max.
in
.355
.355
.355
.355
.355
.355
.355
.355
.355
.355
.355
.355
.355
.355
.550
.550
mm
9.02
9.02
9.02
9.02
9.02
9.02
9.02
9.02
9.02
9.02
9.02
9.02
9.02
9.02
13.97
13.97
Call Toll Free: 1 (800) 323-9612
5
Dura-Con
High Reliability
Metal Shell
.050" (1.27mm) Density
PCB Mount Terminal Block
Recommended Board Layout
NOTE: For additional connector dimensions, see page 5-10.
Typ. Hole Dia. = .040" (1.02 mm)
5
No. of
Contacts
9 Plug
9 Socket
15 Plug
15 Socket
21 Plug
21 Socket
25 Plug
25 Socket
31 Plug
31 Socket
37 Plug
37 Socket
51 Plug
51 Socket
100 Plug
100 Socket
A
Max.
in
.785
.785
.935
.935
1.085
1.085
1.085
1.185
1.335
1.335
1.485
1.485
1.435
1.435
2.175
2.175
mm
19.94
19.94
23.75
23.75
27.56
27.56
30.10
30.10
33.91
33.91
37.72
37.72
36.45
36.45
55.25
55.25
B
+ .005 (0.13)
in
mm
.565
14.35
.565
14.35
.715
18.16
.715
18.16
.865
21.97
.865
21.97
.965
24.51
.965
24.51
1.115
28.32
1.115
28.32
1.265
32.13
1.265
32.13
1.215
30.86
1.215
30.86
1.800
45.72
1.800
45.72
No. of
Contacts
9 Plug
9 Socket
15 Plug
15 Socket
21 Plug
21 Socket
25 Plug
25 Socket
31 Plug
31 Socket
37 Plug
37 Socket
51 Plug
51 Socket
100 Plug
100 Socket
F
+ .010 (0.25)
in
mm
.230
5.84
.230
5.84
.130
3.30
.130
3.30
.130
3.30
.130
3.30
.130
3.30
.130
3.30
.130
3.30
.130
3.30
.130
3.30
.130
3.30
.150
3.81
.150
3.81
.200
5.08
.200
5.08
G
+ .010 (0.25)
in
mm
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.300
7.62
.300
7.62
.400
10.16
.400
10.16
Call Toll Free: 1 (800) 323-9612
C
Max.
in
.308
.308
.308
.308
.308
.308
.308
.308
.308
.308
.308
.308
.351
.351
.394
.394
mm
7.82
7.82
7.82
7.82
7.82
7.82
7.82
7.82
7.82
7.82
7.82
7.82
8.92
8.92
10.00
10.00
H
Max.
in
.420
.420
.420
.420
.420
.420
.420
.420
.520
.520
.520
.520
.650
.650
1.000
1.000
mm
10.67
10.67
10.67
10.67
10.67
10.67
10.67
10.67
13.21
13.21
13.21
13.21
16.51
16.51
25.40
25.40
5-18
J
+ .005 (0.13)
in
mm
.096
2.44
.096
2.44
.096
2.44
.096
2.44
.096
2.44
.096
2.44
.096
2.44
.096
2.44
.996
2.44
.096
2.44
.096
2.44
.096
2.44
.096
2.44
.096
2.44
.125
3.18
.125
3.18
Dura-Con
High Reliability
MIL-C-83513
.050" (1.27mm) Density
Solder Cup/Wire
D-Microminiature
FEATURES
■ All-plastic and metal shell wire versions available in solder cup, gold-plated
solid wire, and insulated stranded wire.
■ PCB mount “terminal block” type connectors available in straight or
right angle.
■ Sizes offered - 9, 15, 21, 25, 31, 35, 51, and 100 (metal shell only).
■ All products are qualified to the requirements of MIL-C-83513 and marked with
the M83513 part number.
■ Optional shell platings and insulator materials offer high performance in harsh
environments.
MECHANICAL
ELECTRICAL
ENVIRONMENTA
L
MATERIALS
■ Mounting hardware per MIL-C-83513.
Insulator: UL94V-0 rated glass-filled polyester per MIL-M-24519 or
diallyl phthalate (DAP) per MIL-M-14.
Contacts: Pins - Copper alloy, Sockets - Copper alloy
Contact Plating: .000050 in gold per MIL-G-45204
Shell Material (Metal Shell Only): Aluminum alloy
Shell Plating (Metal Shell Only): Yellow chromate over cadmium
(std.) or electroless nickel
Operating Temperature: -55°C to +125°C
Current Rating:
Withstanding Voltage:
Contact Resistance:
3 Amps maximum
600 VAC RMS @ sea level
8 milliohms maximum
Durability: 500 mate/unmate cycles
Individual Contact: Forces 6 oz. (170.40 g) maximum insertion;
0.5 oz. (14.20 g) minimum withdrawal
Mating / Unmating Force: See table
Call Toll Free: 1 (800) 323-9612
5-20
No. of
Contacts
9
15
21
25
31
37
51
Maximum
Mating Force
Lb.
Kg
5.63
2.56
9.38
4.26
13.13
5.96
15.63
7.10
19.38
8.80
23.13
10.50
31.88
14.47
Minimum
Unmating Force
Lb.
Kg
.28
.13
.47
.21
.66
.30
.78
.35
.97
.44
1.16
.53
1.59
.72
Dura-Con
High Reliability
MIL-C-83513
.050" (1.27mm) Density
Solder Cup/Wire
D-Microminiature - Metal Shell
Metal Shell
Contact Arrangements
(Face view of pin insert)
(Use reverse order for socket side)
Ordering Information
M83513/04 - A 03 C
Shell Finish
C = Cadmium
N = Electroless Nickel
Connector Type
01 - Metal Shell D Plugs with
Solder Cup Termination
Wire Type (Use only for /03 & /04, otherwise omit)
01 - M22759/11-26-9, 18 inches, White (see note below)
02 - M22759/11-26-9, 36 inches, White (see note below)
03 - M22759/11-26-( ), 18 inches, Color Coded (see note below)
04 - M22759/11-26-( ), 36 inches, Color Coded (see note below)
05 - QQ-W-343, 25 AWG, 0.5 inch, Gold-Plated
06 - QQ-W-343, 25 AWG, 1.0 inch, Gold-Plated
07 - QQ-W-343, 25 AWG, 0.5 inch, Tin-Plated
08 - QQ-W-343, 25 AWG, 1.0 inch, Tin-Plated
09 - M22759/33-26-9, 18 inches, White
10 - M22759/33-26-9, 36 inches, White
11 - M22759/33-26-( ), 18 inches, Color Coded
12 - M22759/33-26-( ), 36 inches, Color Coded
13 - M22759/11-26-9, 72 inches, White
14 - M22759/11-26-( ), 72 inches, Color Coded
15 - M22759/33-26-9, 72 inches, White
16 - M22759/33-26-( ), 72 inches, Color Coded
02 - Metal Shell D Sockets with
Solder Cup Termination
03 - Metal Shell D Plugs
with Wire Leads
04 - Metal Shell D Sockets
with Wire Leads
Insert Arrangements
(No. of Contacts)
A=9
B = 15
C = 21
D = 25
E = 31
F = 37
G = 51
H = 100
Note: See page 5-31 for M83513 mounting hardware.
5-21
Call Toll Free: 1 (800) 323-9612
Dura-Con
High Reliability
MIL-C-83513
.050" (1.27mm) Density
Solder Cup/Wire
D-Microminiature - Metal Shell
Connector Dimensions - Metal Shell
Plug
Socket
A
5
B Max. (Plug)
Min. (Socket)
mm
8.48
C
+ .010" (.254)
- .018" (.457)
in
mm
.390
9.91
.3342
8.49
.390
9.91
.565
14.35
.298
7.57
.270
6.68
.4838
12.29
.540
13.72
.715
18.16
.298
7.57
.270
6.68
23.50
.4842
12.30
.540
13.72
.715
18.16
.298
7.57
.270
6.68
27.30
.6338
16.10
.690
17.53
.865
21.97
.298
7.57
.270
6.68
1.075
27.30
.6342
16.11
.690
17.53
.865
21.97
.298
7.57
.270
6.68
1.175
29.84
.7338
18.64
.790
20.07
.965
24.51
.298
7.57
.270
6.68
25 Socket
1.175
29.84
.7342
18.65
.790
20.07
.965
24.51
.298
7.57
.270
6.68
31 Plug
1.325
33.66
.8838
22.45
.940
23.88
1.115
28.32
.298
7.57
.270
6.68
31 Socket
1.325
33.66
.8842
22.46
.940
23.88
1.115
28.32
.298
7.57
.270
6.68
37 Plug
1.475
37.46
1.0338
26.26
1.090
27.69
1.265
32.13
.298
7.57
.270
6.68
37 Socket
1.475
37.46
1.0342
26.27
1.090
27.69
1.265
32.13
.298
7.57
.270
6.68
51 Plug
1.425
36.20
.9838
24.99
1.040
26.42
1.215
30.86
.341
8.66
.310
7.87
51 Socket
1.425
36.20
.9842
25.00
1.040
26.42
1.215
30.86
.341
8.66
.310
7.87
100 Plug
2.160
54.86
1.3838
35.15
1.432
36.38
1.800
45.71
.384
9.75
.360
9.15
100 Socket
2.160
54.86
1.3842
35.16
1.432
36.38
1.800
45.71
.384
9.75
.360
9.15
No.
of Contacts
9 Plug
± .010" (.254)
in
mm
.775
19.68
in
.3338
9 Socket
.775
19.68
15 Plug
.925
23.50
15 Socket
.925
21 Plug
1.075
21 Socket
25 Plug
Call Toll Free: 1 (800) 323-9612
5-22
D
E
F Max.
± .005" (.127)
in
mm
.565
14.35
± .010" (.254)
in
mm
.298
7.57
in
.270
mm
6.68
Dura-Con
High Reliability
MIL-C-83513
.050" (1.27mm) Density
Solder Cup/Wire
D-Microminiature - Metal Shell
Panel Mounting Dimensions - Metal Shell
Panel Mounting
Dimensions
Panel Cutout Dimensions - Metal Shell
No. of
Contacts
Front Mounting
9
15
21
25
31
37
51
100
No. of
Contacts
Rear Mounting
9
15
21
25
31
37
51
100
No. of
Contacts
Edgeboard Mounting
9
15
21
25
31
37
51
100
A
+.004" (.101mm)
-.000" (.000mm)
in
mm
.408
.558
.708
.808
.958
1.108
1.058
1.450
10.36
14.17
17.98
20.52
24.33
28.14
26.87
36.84
A
+.004" (.101mm)
-.000" (.000mm)
in
mm
.408
.558
.708
.808
.958
1.108
1.058
1.450
10.36
14.17
17.98
20.52
24.33
28.14
26.87
36.84
B
+.004" (.101mm)
-.000" (.000mm)
in
mm
.270
.270
.270
.270
.270
.270
.315
.361
6.86
6.86
6.86
6.86
6.86
6.86
8.00
9.17
6.50
6.50
6.50
6.50
6.50
6.50
7.62
8.58
C
+.005" (.127mm)
-.000" (.000mm)
in
mm
.570
.720
.870
.970
1.120
1.270
1.220
1.805
14.48
18.29
22.10
24.64
28.45
32.26
30.99
45.86
5-23
.570
.720
.870
.970
1.120
1.270
1.220
1.805
B
+.004" (.101mm)
-.000" (.000mm)
in
mm
.256
.256
.256
.256
.256
.256
.300
.338
C
+.005" (.127mm)
-.000" (.000mm)
in
mm
14.48
14.48
22.10
24.64
28.45
32.26
30.99
45.86
C
+.005" (.127mm)
-.000" (.000mm)
in
mm
.570
.720
.870
.970
1.120
1.270
1.220
1.805
D
+.005" (.127mm)
-.000" (.000mm)
in
mm
.089
.089
.089
.089
.089
.089
.089
.117
D
+.005" (.127mm)
-.000" (.000mm)
in
mm
14.48
18.29
22.10
24.64
28.45
32.26
30.99
45.86
.089
.089
.089
.089
.089
.089
.089
.117
D
+.005" (.127mm)
-.000" (.000mm)
in
mm
.089
.089
.089
.089
.089
.089
.089
.117
2.26
2.26
2.26
2.26
2.26
2.26
2.26
2.97
2.26
2.26
2.26
2.26
2.26
2.26
2.26
2.97
Call Toll Free: 1 (800) 323-9612
2.26
2.26
2.26
2.26
2.26
2.26
2.26
2.97
5
Dura-Con
High Reliability
MIL-C-83513
.050" (1.27mm) Density
Solder Cup/Wire
D-Microminiature - Plastic
Plastic Shell
Contact Arrangements
(Face view of pin insert)
(Use reverse order for socket side)
Ordering Information
M83513/06-A 04
Connector Type
Wire Type (Use only for /08 & /09, otherwise omit)
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
06 - Plastic Shell Plugs with
Solder Cup Termination
07 - Plastic Shell Sockets with
Solder Cup Termination
5
08 - Plastic Shell Plugs
with Wire Leads
09 - Plastic Shell Sockets
with Wire Leads
Insert Arrangements
(No. of Contacts)
A=9
B = 15
C = 21
D = 25
E = 31
F = 37
G = 51
Call Toll Free: 1 (800) 323-9612
-
M22759/11-26-9, 18 inches, White
M22759/11-26-9, 36 inches, White
M22759/11-26-( ), 18 inches, Color Coded
M22759/11-26-( ), 36 inches, Color Coded
QQ-W-343, 25 AWG, 0.5 inch, Gold-Plated
QQ-W-343, 25 AWG, 1.0 inch, Gold-Plated
QQ-W-343, 25 AWG, 0.5 inch, Tin-Plated
QQ-W-343, 25 AWG, 1.0 inch, Tin-Plated
M22759/33-26-9, 18 inches, White
M22759/33-26-9, 36 inches, White
M22759/33-26-( ), 18 inches, Color Coded
M22759/33-26-( ), 36 inches, Color Coded
M22759/11-26-9, 72 inches, White
M22759/11-26-( ), 72 inches, Color Coded
M22759/33-26-9, 72 inches, White
M22759/33-26-( ), 72 inches, Color Coded
Note: See page 5-31 for M83513 mounting hardware.
5-24
Dura-Con
High Reliability
MIL-C-83513
.050" (1.27mm) Density
Solder Cup/Wire/PCB
D-Microminiature - Plastic
Shell Dimensions - (All-Plastic Version)
Plug
Socket
A
No.
of Contacts
B Max. (Plug)
Min. (Socket)
±.010" (.254)
in
mm
in
mm
C
+.010" (.254)
-.018" (.457)
in
mm
D
E
±.005" (.127)
in
mm
F Max.
±.010" (.254)
in
mm
in
mm
9 Plug
.778
19.76
.2918
7.41
.398
10.11
.565
14.35
.208
5.28
.173
4.39
9 Socket
.778
19.76
.2922
7.42
.398
10.11
.565
14.35
.208
5.28
.173
4.39
15 Plug
.928
23.57
.4418
11.22
.548
13.92
.715
18.16
.208
5.28
.173
4.39
15 Socket
.928
23.57
.4422
11.23
.548
13.92
.715
18.16
.208
5.28
.173
4.39
21 Plug
1.078
27.38
.5918
15.03
.698
17.73
.865
21.97
.208
5.28
.173
4.39
21 Socket
1.078
27.38
.5922
15.04
.698
17.73
.865
21.97
.208
5.28
.173
4.39
25 Plug
1.178
29.92
.6918
17.57
.798
20.27
.965
24.51
.208
5.28
.173
4.39
25 Socket
1.178
29.92
.6922
17.58
.798
20.27
.965
24.51
.208
5.28
.173
4.39
31 Plug
1.328
33.73
.8418
21.38
.948
24.08
1.115
28.32
.208
5.28
.173
4.39
31 Socket
1.328
33.73
.8422
21.39
.948
24.08
1.115
28.32
.208
5.28
.173
4.39
37 Plug
1.478
37.54
.9918
25.19
1.098
27.89
1.265
32.13
.208
5.28
.173
4.39
37 Socket
1.478
37.54
.9922
25.20
1.098
27.89
1.265
32.13
.208
5.28
.173
4.39
51 Plug
1.428
36.27
.9418
23.92
1.048
26.62
1.215
30.86
.250
6.35
.220
5.59
51 Socket
1.428
36.27
.9422
23.93
1.048
26.62
1.215
30.86
.250
6.35
.220
5.59
5-25
Call Toll Free: 1 (800) 323-9612
5
Dura-Con
High Reliability
MIL-C-83513
.050" (1.27mm) Density
Solder Cup/Wire/PCB
D-Microminiature - Plastic
Panel Mounting Dimensions - All-Plastic
Panel Cutout Dimensions
No. of
Contacts
Front Mounting
A
+.004" (.101mm)
-.000" (.000mm)
in
mm
B
+.004" (.101mm)
-.000" (.000mm)
in
mm
C
+.005" (.127mm)
-.000" (.000mm)
in
mm
9
.408
10.36
.172
4.37
.570
14.48
15
.558
14.17
.172
4.37
.720
14.48
21
.708
17.98
.172
4.37
.870
22.10
25
.808
20.52
.172
4.37
.970
24.64
31
.958
24.33
.172
4.37
1.120
28.45
37
1.108
28.14
.172
4.37
1.270
32.26
51
1.058
26.87
.215
5.46
1.220
30.99
Rear Cutout Dimensions
No. of
Contacts
5
Rear Mounting
A
+.004" (.101mm)
-.000" (.000mm)
in
mm
B
+.004" (.101mm)
-.000" (.000mm)
in
mm
9
.373
9.47
.216
5.49
.570
14.48
15
.523
13.28
.216
5.49
.720
18.29
21
.674
17.12
.216
5.49
.870
22.10
25
.774
19.66
.216
5.49
.970
24.64
31
.924
23.47
.216
5.49
1.120
28.45
37
1.074
27.28
.216
5.49
1.270
32.26
51
1.024
26.01
.259
6.58
1.220
30.99
Edgeboard Mounting Cutout Dimensions
Edgeboard Mounting
C
+.005" (.127mm)
-.000" (.000mm)
in
mm
No. of
Contacts
D
+.005" (.127mm)
-.000" (.000mm)
in
mm
9
.570
14.48
15
.720
18.29
21
.870
22.10
25
.970
24.64
31
1.120
28.45
37
1.270
32.26
51
1.220
30.99
Call Toll Free: 1 (800) 323-9612
5-26
Dura-Con
High Reliability
MIL-C-83513
.050" (1.27mm) Density
D-Microminiature
PC Board Mount
Terminal Block
Contact Arrangements
(Face view of pin insert)
(Use reverse order for socket side)
Ordering Information
M83513/10 - C 02 C N
Hardware
N = No Jackpost
P = Jackpost Attached
Connector Description
10 = Plug, 9-37 Pos., Narrow Profile, Rt. Angle
11 = Plug, 51 Pos., Narrow Profile, Rt. Angle
12 = Plug, 100 Pos., Narrow Profile, Rt. Angle
13 = Socket, 9-37 Pos., Narrow Profile, Rt. Angle
14 = Socket, 51 Pos., Narrow Profile, Rt. Angle
15 = Socket, 100 Pos., Narrow Profile, Rt. Angle
16 = Plug, 9-37 Pos., Std. Profile, Rt. Angle
17 = Plug, 51 Pos., Std. Profile, Rt. Angle
18 = Plug, 100 Pos., Std. Profile, Rt. Angle
19 = Socket, 9-37 Pos., Std. Profile, Rt. Angle
20 = Socket, 51 Pos., Std. Profile, Rt. Angle
21 = Socket, 100 Pos., Std. Profile, Rt. Angle
22 = Plug, 9-37 Pos., Straight Mount
23 = Plug, 51 Pos., Straight Mount
24 = Plug, 100 Pos., Straight Mount
25 = Socket, 9-37 Pos., Straight Mount
26 = Socket, 51 Pos., Straight Mount
27 = Socket, 100 Pos., Straight Mount
Shell Finish
C = Cadmium
N = Electroless Nickel
Termination Length
01 = 0.109
02 = 0.140
03 = 0.172
Insert Arrangement Length
(No. of Contacts)
A=9
B = 15
C = 21
D = 25
E = 31
F = 37
G = 51
H = 100
5-27
Call Toll Free: 1 (800) 323-9612
5
Dura-Con
High Reliability
MIL-C-83513
.050" (1.27mm) Density
Solder Cup/Wire/PCB
D-Microminiature
Recommended Board Layout
(/16-/21)
Typ. Hole Dia. = .040" (1.02 mm)
NOTE: For additional connector dimensions, see page 5-22.
5
A
Max.
No. of
Contacts
in
mm
9 Plug
9 Socket
15 Plug
15 Socket
21 Plug
21 Socket
25 Plug
25 Socket
31 Plug
31 Socket
37 Plug
37 Socket
51 Plug
51 Socket
100 Plug
100 Socket
1.390
1.390
1.540
1.540
1.690
1.690
1.790
1.790
2.040
2.040
2.340
2.340
1.875
1.875
2.780
2.780
35.31
35.31
39.12
39.12
42.93
42.93
45.47
45.47
51.82
51.82
59.44
59.44
47.63
47.63
70.61
70.61
No. of
Contacts
9 Plug
9 Socket
15 Plug
15 Socket
21 Plug
21 Socket
25 Plug
25 Socket
31 Plug
31 Socket
37 Plug
37 Socket
51 Plug
51 Socket
100 Plug
100 Socket
B
± .007 (0.18)
in
mm
1.150
1.150
1.300
1.300
1.450
1.450
1.550
1.550
1.800
1.800
2.100
2.100
1.600
1.600
2.500
2.500
29.21
29.21
33.02
33.02
36.83
36.83
39.37
39.37
45.72
45.72
53.34
53.34
40.64
40.64
63.50
63.50
in
.190
.200
.190
.200
.190
.200
.190
.200
.190
.200
.190
.200
.190
.200
.190
.200
H
Max.
mm
4.83
5.08
4.83
5.08
4.83
5.08
4.83
5.08
4.83
5.08
4.83
5.08
4.83
5.08
4.83
5.08
G
Max.
in
.308
.308
.308
.308
.308
.308
.308
.308
.308
.308
.308
.308
.351
.351
.394
.394
mm
7.82
7.82
7.82
7.82
7.82
7.82
7.82
7.82
7.82
7.82
7.82
7.82
8.92
8.92
10.00
10.00
Call Toll Free: 1 (800) 323-9612
C
± .005 (0.13)
in
mm
.565
.565
.715
.715
.865
.865
.965
.965
1.115
1.115
1.265
1.265
1.215
1.215
1.800
1.800
14.35
14.35
18.16
18.16
21.97
21.97
24.51
24.51
28.32
28.32
32.13
32.13
30.86
30.86
45.72
45.72
J
± .005 (0.13)
in
mm
.096
2.44
.096
2.44
.096
2.44
.096
2.44
.096
2.44
.096
2.44
.096
2.44
.096
2.44
.096
2.44
.096
2.44
.096
2.44
.096
2.44
.096
2.44
.096
2.44
.125
3.18
.125
3.18
5-28
F
Max.
in
mm
.465
.465
.465
.465
.465
.465
.465
.465
.465
.465
.465
.465
.565
.565
.765
.765
11.81
11.81
11.81
11.81
11.81
11.81
11.81
11.81
11.81
11.81
11.81
11.81
14.35
14.35
19.43
19.43
K
± .015
in
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.225
.225
mm
3.18
3.18
3.18
3.18
3.18
3.18
3.18
3.18
3.18
3.18
3.18
3.18
3.18
3.18
5.72
5.72
Dura-Con
High Reliability
MIL-C-83513
.050" (1.27mm) Density
Solder Cup/Wire/PCB
D-Microminiature
Straight (180°) Termination
(/22-/27)
Recommended Board Layout
Typ. Hole Dia. = .040" (1.02 mm)
NOTE: For additional connector dimensions, see page 5-22.
No. of
Contacts
9 Plug
9 Socket
15 Plug
15 Socket
21 Plug
21 Socket
25 Plug
25 Socket
31 Plug
31 Socket
37 Plug
37 Socket
51 Plug
51 Socket
100 Plug
100 Socket
No. of
Contacts
9 Plug
9 Socket
15 Plug
15 Socket
21 Plug
21 Socket
25 Plug
25 Socket
31 Plug
31 Socket
37 Plug
37 Socket
51 Plug
51 Socket
100 Plug
100 Socket
A
Max.
in
1.390
1.390
1.390
1.390
1.690
1.690
1.740
1.740
2.040
2.040
2.340
2.340
2.270
2.270
3.070
3.070
mm
35.31
35.31
35.31
35.31
42.93
42.93
44.20
44.20
51.82
51.82
59.44
59.44
57.66
57.66
77.98
77.98
B
± .007 (0.18)
in
mm
1.150
29.21
1.150
29.21
1.150
29.21
1.150
29.21
1.450
36.83
1.450
36.83
1.500
38.10
1.500
38.10
1.800
45.72
1.800
45.72
2.100
53.34
2.100
53.34
2.000
50.80
2.000
50.80
2.800
71.12
2.800
71.12
mm
4.83
5.08
4.83
5.08
4.83
5.08
4.83
5.08
4.83
5.08
4.83
5.08
4.83
5.08
4.83
5.08
J
± .005 (0.13)
in
mm
.096
2.44
.096
2.44
.096
2.44
.096
2.44
.096
2.44
.096
2.44
.096
2.44
.096
2.44
.096
2.44
.096
2.44
.096
2.44
.096
2.44
.096
2.44
.096
2.44
.125
3.18
.125
3.18
H
Max.
in
.190
.200
.190
.200
.190
.200
.190
.200
.190
.200
.190
.200
.190
.200
.190
.200
C
± .005 (0.13)
in
mm
.565
14.35
.565
14.35
.715
18.16
.715
18.16
.865
21.97
.865
21.97
.965
24.51
.965
24.51
1.115
28.32
1.115
28.32
1.265
32.13
1.265
32.13
1.215
30.86
1.215
30.86
1.800
45.72
1.800
45.72
D
Max.
in
.885
.885
.945
.945
1.185
1.185
1.275
1.275
1.575
1.576
1.875
1.875
1.775
1.775
2.585
2.585
K
Max.
in
.165
.165
.165
.165
.165
.165
.165
.165
.165
.165
.165
.165
.165
.165
.300
.300
5-29
G
Max.
mm
22.48
22.48
24.0
24.0
30.09
30.09
32.38
32.38
40.00
40.00
47.62
47.62
45.08
45.08
65.55
65.65
in
.308
.308
.308
.308
.308
.308
.308
.308
.308
.308
.308
.308
.351
.351
.455
.455
mm
7.75
7.75
7.75
7.75
7.75
7.75
7.75
7.75
7.75
7.75
7.75
7.75
8.92
8.92
11.56
11.56
L
Max.
mm
4.19
4.19
4.19
4.19
4.19
4.19
4.19
4.19
4.19
4.19
4.19
4.19
4.19
4.19
7.62
7.62
in
.355
.355
.355
.355
.355
.355
.355
.355
.355
.355
.355
.355
.355
.355
.550
.550
mm
9.02
9.02
9.02
9.02
9.02
9.02
9.02
9.02
9.02
9.02
9.02
9.02
9.02
9.02
13.97
13.97
Call Toll Free: 1 (800) 323-9612
5
Dura-Con
High Reliability
MIL-C-83513
.050" (1.27mm) Density
Solder Cup/Wire/PCB
D-Microminiature
Recommended Board Layout
(/10-/15)
NOTE: For additional connector dimensions, see page 5-22.
Typ. Hole Dia. = .040" (1.02 mm)
5
No. of
Contacts
9 Plug
9 Socket
15 Plug
15 Socket
21 Plug
21 Socket
25 Plug
25 Socket
31 Plug
31 Socket
37 Plug
37 Socket
51 Plug
51 Socket
100 Plug
100 Socket
A
Max.
in
.785
.785
.935
.935
1.085
1.085
1.085
1.185
1.335
1.335
1.485
1.485
1.435
1.435
2.175
2.175
mm
19.94
19.94
23.75
23.75
27.56
27.56
30.10
30.10
33.91
33.91
37.72
37.72
36.45
36.45
55.25
55.25
B
± .005 (0.13)
in
mm
.565
14.35
.565
14.35
.715
18.16
.715
18.16
.865
21.97
.865
21.97
.965
24.51
.965
24.51
1.115
28.32
1.115
28.32
1.265
32.13
1.265
32.13
1.215
30.86
1.215
30.86
1.800
45.72
1.800
45.72
No. of
Contacts
9 Plug
9 Socket
15 Plug
15 Socket
21 Plug
21 Socket
25 Plug
25 Socket
31 Plug
31 Socket
37 Plug
37 Socket
51 Plug
51 Socket
100 Plug
100 Socket
F
± .010 (0.25)
in
mm
.230
5.84
.230
5.84
.130
3.30
.130
3.30
.130
3.30
.130
3.30
.130
3.30
.130
3.30
.130
3.30
.130
3.30
.130
3.30
.130
3.30
.150
3.81
.150
3.81
.200
5.08
.200
5.08
G
± .010 (0.25)
in
mm
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.300
7.62
.300
7.62
.400
10.16
.400
10.16
Call Toll Free: 1 (800) 323-9612
C
Max.
in
.308
.308
.308
.308
.308
.308
.308
.308
.308
.308
.308
.308
.351
.351
.394
.394
mm
7.82
7.82
7.82
7.82
7.82
7.82
7.82
7.82
7.82
7.82
7.82
7.82
8.92
8.92
10.00
10.00
H
Max.
in
.420
.420
.420
.420
.420
.420
.420
.420
.520
.520
.520
.520
.650
.650
1.000
1.000
mm
10.67
10.67
10.67
10.67
10.67
10.67
10.67
10.67
13.21
13.21
13.21
13.21
16.51
16.51
25.40
25.40
5-30
J
± .005 (0.13)
in
mm
.096
2.44
.096
2.44
.096
2.44
.096
2.44
.096
2.44
.096
2.44
.096
2.44
.096
2.44
.996
2.44
.096
2.44
.096
2.44
.096
2.44
.096
2.44
.096
2.44
.125
3.18
.125
3.18
Dura-Con
High Reliability
MIL-C-83513
.050" (1.27mm) Density
Solder Cup/Wire/PCB
D-Microminiature
Mounting Hardware
5
Ordering Information
Type
Style
Jackscrew
Low Profile
Jackscrew
High Profile
Jackscrew
Low Profile
Jackscrew
High Profile
Jackpost
-Jackscrew
Low Profile
Jackscrew
High Profile
Jackscrew
Low Profile
Jackscrew
High Profile
Jackpost
-*100 Size Only
Screwhead
Recessed Hex
Recessed Hex
Slotted
Slotted
-Hex
Hex
Slotted
Slotted
--
Thread
2/56
2/56
2/56
2/56
2/56
4/40*
4/40*
4/40*
4/40*
4/40*
Military
Part No.
M83513/5-02
M83513/5-03
M83513/5-05
M83513/5-06
M83513/5-07
M83513/5-12
M83513/5-13
M83513/5-15
M83513/5-16
M83513/5-17
5-31
Call Toll Free: 1 (800) 323-9612
Dura-Con
.050" (1.27mm) Density
High Reliability
Connector Saver
All-Plastic & Metal Shell
FEATURES
■ Designed to significantly reduce damage to already mounted Dura-Con
connectors during routine system tests.
■ Eliminates numerous mating & unmating cycles experienced by connectors
on test harnesses.
■ Plug connector on one end, socket connector on the other.
■ Available in all-plastic (polyester) or in metal shell with diallyl phthalate or
polyester insulators (both UL94V-0 rated).
■ Locking hardware must be ordered separately.
MATERIALS
Insulator: UL94V-0 glass-filled polyester or diallyl phthalate
Contacts: Copper alloy
Contact Plating: .000050 in gold
Shell (Metal Only): Aluminum alloy
MECHANICAL
ELECTRICAL
ENVIRONMENTAL
Shell Plating: Yellow chromate over cadmium
Operating Temperature: -55°C to +135°C
Current Rating:
Withstanding Voltage:
Contact Resistance:
3 Amps maximum
600 VAC RMS @ sea level
8 milliohms maximum
Individual Contact: Insertion force, 6 oz. (170.40 g) maximum;
Withdrawal force 0.5 oz. (14.20 g) minimum
Mating / Unmating Forces: See previous tables
No. of
Contacts
9
15
21
25
31
37
51
100
Diallyl Phthalate
Catalog No.
DCCM9CS
DCCM15CS
DCCM21CS
DCCM25CS
DCCM31CS
DCCM37CS
DCCM51CS
DCCM100CS
Metal Shell
Glass-Filled Polyester
Catalog No.
DCDM9CS
DCDM15CS
DCDM21CS
DCDM25CS
DCDM31CS
DCDM37CS
DCDM51CS
DCDM100CS
Call Toll Free: 1 (800) 323-9612
5-32
All Plastic
Glass-Filled Polyester
Catalog No.
DCDA9CS
DCDA15CS
DCDA21CS
DCDA25CS
DCDA31CS
DCDA37CS
DCDA51CS
–
Dura-Con
High Reliability
Microedge Connectors
FEATURES
■
■
■
■
■
■
.050" (1.27mm) Density
PC Board Mount
Metal Shell
Variety of available PC board mounting styles.
- “Coke Bottle” for edge mounting on double-sided PCBs
- Right-angle (90°) mounting for single- or double-sided daughter boards
- “Claw Foot” leads
- Gold-plated solid copper wire pigtails
Harnessing capabilities exist for both plug & socket.
Standard sizes are 128 and 184 positions.
Utilizes high-reliability Dura-Con twist pin contact system assuring electrical continuity under
extreme shock and vibration.
Aluminum shells and diallyl phthalate insulators make Dura-Con microedge connectors ideal
for airborne or space applications.
Microedge metal shell connectors meet the requirement of MIL-C-55302.
MATERIALS
Insulator: UL94V-0 glass-filled polyester or diallyl phthalate per MIL-M-14 (green)
Contacts: Copper alloy
Contact Plating: .000050 in Gold
Shell: Aluminum alloy
MECHANICAL
ELECTRICAL
ENVIRONMENTAL
Shell Plating: Electroless Nickel
Operating Temperature: -55°C to +135°C
Current Rating:
Withstanding Voltage:
Contact Resistance:
3 Amps maximum
600 VAC RMS @ sea level, 300 VAC @ 70,000 ft.
8 milliohms maximum
Insertion/Withdrawal Force:
6 oz. (170.40 g[f]) maximum insertion force, per contact;
0.5 oz. (14.20 g[f]) minimum withdrawal force, per contact
Call Toll Free: 1 (800) 323-9612
5-34
Dura-Con
High Reliability
Microedge Connectors
.050" (1.27mm) Density
PC Board Mount
Metal Shell
5
5-35
Call Toll Free: 1 (800) 323-9612
Dura-Con
High Reliability
Microedge Connectors
.050" (1.27mm) Density
PC Board Mount
Metal Shell
Recommended PCB thickness .047-.062.
Consult factory for other thicknesses.
5
* Narrow Version (DNEB) .250 Wide
Call Toll Free: 1 (800) 323-9612
5-36
Dura-Con
High Reliability
Microedge Connectors
.050" (1.27mm) Density
PC Board Mount
Metal Shell
184 Contact Plug (Standard Insulated Wire)
Side View
* Narrow Version (DNEB) .250 Wide
Shell Polarization Kit
Order No.
DNEBP0L1
DMEBP0L1
“L”
.250
.312
Key
L
Used On
DNEB Narrow Only
DMEB Std. Width
Mounting Hardware
Standard Jackscrew/Jackpost Assembly
Removable Jackscrew/Jackpost
Assembly
Plug with Jackscrew
Consult factory if required.
Ordering Information
Receptacle with Jackscrew
DMEB 1-128 P 6 E 2 180
Series Prefix
DMEB = Microedgeboard
DNEB = Microedgeboard, Narrow (184 Only)
Lead Length in Inches
Contact Spacing
1 = .050" (1.27mm) centers
128/184
2 = .100" (2.54mm) centers
64/92 (every other contact hole)
For other contact spacing accommodations, consult the factory.
Termination,
Color of Finish
1 = White
*2 = Yellow
3 = Tin-Plated
*4 = Gold-Plated (Solid Copper Wire Only)
*5 = Color Coded per MIL-Std. 681, System 1
No. of Contacts
128, 184
Wire Type/Termination Style
C = Solid Copper
E = MIL-W-16878/4, 7 Strand
BS = PC Board (Coke Bottle)
BRA = PC Board Right-Angle (Formed to “A” Side)
BRB = PC Board Right-Angle (Formed to “B” Side)
W = PC Board (Claw Foot)
Contact Type
P = Pin
S = Socket
Wire Size in AWG
5 = 25 AWG Solid Copper
6 = 26 AWG Stranded Wire
S = Solder Cup
*Indicates Cinch std Option
5-37
Call Toll Free: 1 (800) 323-9612
5
Dura-Con
High Reliability
Strip Connectors
.050" (1.27mm) Density
Solder Cup/Wire
All-Plastic
■ Lightweight.
FEATURES
■ Slim Profile.
■ High-Density Interconnect.
■ High-reliability Dura-Con twist pin contact system for extreme shock &
vibration applications.
■ Optional polarization with guide pins to prevent mismating connectors.
MECHANICAL
ELECTRICAL
ENVIRONMENTAL
MATERIALS
■ Plug & socket available in sizes from 1 to 60 positions.
Insulator: UL94V-0 glass-filled polyester
Contacts: Copper alloy
Contact Plating: .000050 in gold
Operating Temperature: -55°C to +135°C
Current Rating:
3 Amps maximum
Withstanding Voltage:
600 VAC @ sea level;
150 VAC @ 70,000 ft.
Contact Resistance:
8 milliohms maximum
Insertion & Withdrawal Force (Per Contact):
6 oz. (170.40 g[f]) maximum insertion;
0.5 oz. (14.20 g[f]) minimum withdrawal
Call Toll Free: 1 (800) 323-9612
5-38
Dura-Con
High Reliability
Strip Connectors
.050" (1.27mm) Density
Solder Cup/Wire
All Plastic
Dimensions
Socket Connector
Pin Connector
Epoxy
24 Gauge Stainless Steel Guide Pin*
NOTE:
Dimension A is number
of positions less 1
multiplied by .050
* Assembly in socket connector only.
Ordering Information
CS A 1 10 P 4 C 4-00.5 G
Cinch Dura-Con Strip
Thermoplastic
Glass-Reinforced
Strip Connector
Guide Pin (Socket Only)
Empty Cavity (Pin Only)
G02 = Guide Pin Position No. 2
GX = Special Position,
Consult Factory
Contact Centers
A = .050 (24 Ga.)
Contact Position
1 = Contacts in every position
Lead Length in inches
00.5 Solid copper wire only
01.0 Solid copper wire only
02.0 Solid copper wire only
18.0 Stranded wire only
24.0 Stranded wire only
36.0 Stranded wire only
48.0 Stranded wire only
No. of Contact Positions
1 through 60**
Contact Type
P = Pin
S = Socket
Insulation Color,
Solid Wire Finish,
Solid Cup Finish
1 = All White
*2 = All Yellow
3 = Tin-Plated
*4 = Gold-Plated (Solid Wire Only)
*5 = Color Coded Per MIL-Std.
681, System 1
System 1. (Stranded Wire Only)
Wire Size in AWG
5 = 25 AWG Solid Copper Wire
6 = 26 AWG Stranded Wire
S = Solder Cup (Skip to
guide pin field if necessary)
Insulation Wire or
Solid Wire Type
C = Solid Copper
E = MIL-W-168 78/4, 7 Strand
* - Indicates Cinch std. option.
** - Consult factory for larger sizes and multi-row.
5-39
Call Toll Free: 1 (800) 323-9612