Ohmite MC4-5006JER Unique terminals allow spacing between board and resistor Datasheet

MC4 Series
High Voltage 4-Resistor SMD DIP Package
Ohmite’s MC4 Series offers 4 high
voltage SMD resistors in a single DIP
package, supplied on tape and reel for
automated placement. Each resistor provides a rating of 0.75W with a maximum
voltage of 2500 VDC. Designers can
specify up to 4 different resistor value/
tolerance combinations and connect then
individually, in series, or parallel to derive
countless results. The flexible S-Bend terminals provide solder joint integrity while
leaving space between the resistor pack
and the PCB. Standard parts are available
in single resistance values for immediate
delivery.
F e at u r e s
• Unique terminals allow spacing
between board and resistor
• Design allows multiple configurations
• 2,500 volts max. per resistor
per pack; 10KV total
• Supplied on tape & reel for
automated placement
S ER I E S S PE C I F I C AT I ON S
Series
MC4
Resistance
Range (Ohms)
200Ω to 5,000M
Power @25°C
per resistor
0.75W
Max. Operating
Voltage
2,500
c h a r a c t e r is t ics
Standard Temperature Coefficient
50PPM/°C
100PPM/°C
200Ω-250M
251M-5,000M
p e r f o r m a n c e d ata
Characteristic Test Method
Resistor Thick film on Alumina
Humidity MIL-STD-202, Method 103B,
Condition B
Resistance Range 200 ohms to 5,000M
Power Rating 0.75W per resistor, 3.0W total
Voltage Rating 2500 VDC per resistor
Tolerance 5% to 20%
Specification
Dielectric Withstanding MIL-STD-202, Method 301,
Voltage 750V
Insulation Resistance MIL-STD-202, Method 302,
Condition A or B
Operating -55°C to +180°C
Temperature
Thermal Shock MIL-STD-202, Method 107G,
Condition B, B-1, or F
TCR and VCR see Slim Mox
Solder Silver solder is recommended for
MC4 resistors. Leaching of the
silver in the termination will occur if
non-silver solder is used. 60/40 tinlead solders are not recommended
for use with the MC4 product.
Load Life MIL-STD-202, Method 108A,
Condition D
Resistance to Solvents MIL-STD-202, Method 215G
26
3 in parallel
2.25W
2500 VDC
1 individual
0.75W
2500 VDC
>10,000M or
greater dry
±0.20%
±1.0%
No degradation of coating
or marking
±0.25%
Vibration, High MIL-STD-202, Method 204D,
Frequency Condition D
±.020%
±0.50%
P o ssi b l e c o n f i g u r a t i o n s
2 pairs in parallel
1.5W each
2500 VDC each
±0.25%
Shock (Specified Pulse) MIL-STD-202, Method 213B,
Condition I
Power Conditioning MIL-R-49462A, Par 4.8
4 individual
0.75W each
2500 VDC each
±0.25%
4 in series
3W
10,000 VDC
2 in series
1.5W
5000 VDC
2 in parallel
1.5W
2500 VDC
3 in series
2.25W
7500 VDC
1 individual
0.75W
2500 VDC
1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • [email protected]
2 pairs in series
1.5W each
5000 VDC each
4 in parallel
3W
2500 VDC
MC4 Series
High Voltage 4-Resistor SMD DIP Package
d im e n si o n s
(in./mm)
Land Pattern
0.750" max.
(19.05mm)
0.71" ±.01
(18.03mm)
0.740"
(18.8mm)
R1
0.190" typ.
(4.8mm)
0.110"
(2.8mm)
R2
0.75" ±.01
(19.05mm)
0.650"
(16.5mm)
0.080"
(2.0mm)
R3
R4
0.03"
(0.76mm)
0.080"
(2.0mm)
0.580"
(14.7mm)
0.676"
(17.17mm)
o r d e r i n g i n f o r m at i o n
Tape and Reel
E = RoHS optional
compliant 250 per reel
M C 4 - 1 0 0 2 F E R
MC4 Series
Ohms
First 3 digits are
significant; 4th digit is
multiplier (# of zeroes
to follow). Examples:
1003 = 100KΩ
5004 = 5MΩ
1007 = 1GΩ
Tolerance
J = 5%
K = 10%
P = 20%
Standard Part Numbers
Part
Tape and Reel Orientation
Description
MC4-1003JER 100K ohms per resistor, 5%
MC4-5003JER 500K ohms per resistor, 5%
MC4-1004JER 1M ohms per resistor, 5%
MC4-5004JER 5M ohms per resistor, 5%
MC4-1005JER 10M ohms per resistor, 5%
MC4-5005JER 50M ohms per resistor, 5%
MC4-1006JER 100M ohms per resistor, 5%
MC4-5006JER 500M ohms per resistor, 5%
MC4-1007KER 1G ohms per resistor, 10%
MC4-5007KER 5G ohms per resistor, 10%
*Custom part numbers are assigned sequentially. MC4-SP0001, MC4-SP0002, etc. Go to
this link to design your own MC4 resistor and
have a unique part number assigned. www.
ohmite.com/mc4sp/
Design online at:
www.ohmite.com/mc4sp/
1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • [email protected]
27
Similar pages