CT Micro CT4502VST1 1mbit/s high speed phototransistor optocoupler Datasheet

6N135, 6N136, CT4502, CT4503
1Mbit/s High Speed Phototransistor Optocoupler
Description
Features
•
High speed 1MBit/s
•
High isolation voltage between input and output
The 6N135, 6N136, CT4502 and CT4503 devices
each consist of an infrared emitting diode, optically
coupled to a high speed photo detector transistor. A
(Viso=5000 Vrms )
•
Guaranteed CTR performance from 0°C to 70°C
•
Wide operating temperature range of -55°C to
separate connection for the photodiode bias and
output-transistor collector increase the speed by
several orders of magnitude over conventional
100°C
•
phototransistor
Regulatory Approvals
UL - UL1577 (E364000)
VDE - EN60747-5-5(VDE0884-5)
CQC – GB4943.1, GB8898
IEC60065, IEC60950
couplers
by
reducing
the
base-collector capacitance of the input transistor.
The devices are packaged in an 8-pin DIP package
and also available in gullwing (400mil) and surface
mount lead forming.
Applications
•
Line receivers
•
Telecommunication equipment
•
High speed logic ground isolation
•
Feedback loop in switch-mode power supplies
•
Home appliances
Package Outline
Schematic
Note: Different bending options available. See package
dimension.
CT Micro
Proprietary & Confidential
Page 1
Rev 2
May, 2015
6N135, 6N136, CT4502, CT4503
1Mbit/s High Speed Phototransistor Optocoupler
Absolute Maximum Rating at 25oC
Symbol
Parameters
Ratings
Units
5000
VRMS
VISO
Isolation voltage *1
TOPR
Operating temperature
-55 ~ +100
oC
TSTG
Storage temperature
-55 ~ +125
oC
TSOL
Soldering temperature *2
260
oC
Notes
Emitter
IF
Forward current
25
mA
IFP
Peak forward current (50% duty, 1ms P.W)
50
mA
Peak transient current
1
A
IF(TRANS)
(≤1µs P.W,300pps)
VR
Reverse voltage
5
V
PD
Power dissipation
40
mW
Power dissipation
100
mW
Emitter-Base reverse voltage
5
V
Base current
5
mA
IO(AVG)
Average Output current
8
mA
IO (Peak)
Peak Output current
16
mA
Detector
PD
VEBR
IB
VO
Output voltage
-0.5 to 20
V
VCC
Supply voltage
-0.5 to 30
V
CT Micro
Proprietary & Confidential
Page 2
Rev 2
May, 2015
6N135, 6N136, CT4502, CT4503
1Mbit/s High Speed Phototransistor Optocoupler
Electrical Characteristics
TA = 0 - 70°C (unless otherwise specified). Typical values are measured at TA = 250C and VCC=5V
Emitter Characteristics
Symbol
Parameters
Test Conditions
Min
Typ
Max
Units
VF
Forward voltage
IF = 16mA
-
1.45
1.6
V
VR
Reverse Voltage
IR = 10µA
5.0
-
-
V
IF =16mA
-
-1.8
-
mV/°C
Min
Typ
Max
Units
-
0.001
0.5
-
0.01
1
-
-
50
-
140
200
-
0.01
1
∆VF/∆TA
Notes
Temperature coefficient of forward
voltage
Detector Characteristics
Symbol
Parameters
Test Conditions
Notes
IF=0mA, VO=VCC=5.5V,
TA=25°C
IOH
Logic High Output Current
IF=0mA, VO=VCC=15V,
µA
TA=25°C
IF=0mA, VO=VCC=15V
ICCL
IF=16mA, VO=Open,
Logic Low Supply Current
µA
VCC=15V
IF=0mA, VO=Open, VCC=15V,
TA=25°C
ICCH
Logic High Supply Current
µA
IF=0mA, VO=Open,
-
-
2
VCC=15V
CT Micro
Proprietary & Confidential
Page 3
Rev 2
May, 2015
6N135, 6N136, CT4502, CT4503
1Mbit/s High Speed Phototransistor Optocoupler
Electrical Characteristics
TA = 0 - 70°C (unless otherwise specified). Typical values are measured at TA = 250C and VCC=5V
Transfer Characteristics
Symbol
Parameters
Test Conditions
6N135
CTR
6N136
IF=16mA, VO=0.4V,VCC=4.5V,
CT4502
TA=25°C
Current Transfer
CT4503
Ratio
6N135
Min
Typ
Max
7
-
50
19
-
50
5
-
-
15
-
-
-
0.18
0.4
-
0.18
0.4
Units
Notes
%
6N136
IF=16mA, VO=0.5V, VCC=4.5V
CT4502
CT4503
IF=16mA,IO=1.1mA,VCC=4.5V,
6N135
TA=25°C
6N136
IF=16mA, IO=3mA, VCC=4.5V,
CT4502
TA=25°C
VOL
Logic Low Output
CT4503
V
Voltage
IF=16mA, IO=0.8mA,
6N135
-
-
0.5
-
-
0.5
VCC=4.5V
6N136
IF=16mA, IO=2.4mA,
CT4502
VCC=4.5V
CT4503
CT Micro
Proprietary & Confidential
Page 4
Rev 2
May, 2015
6N135, 6N136, CT4502, CT4503
1Mbit/s High Speed Phototransistor Optocoupler
Electrical Characteristics
TA = 0 - 70°C (unless otherwise specified). Typical values are measured at TA = 250C and VCC=5V
Switching Characteristics
Symbol
Parameters
Propagation Delay
TPHL
Test Conditions
Min
Typ
Max
RL=4.1KΩ, TA=25°C
-
0.35
1.5
RL=4.1KΩ
-
-
2.0
RL=1.9KΩ, TA=25°C
-
0.35
0.8
RL=1.9KΩ
-
-
1.0
RL=4.1KΩ, TA=25°C
-
0.5
1.5
RL=4.1KΩ
-
-
2.0
RL=1.9KΩ, TA=25°C
-
0.3
0.8
RL=1.9KΩ
-
-
1.0
1,000
-
-
1,000
-
-
15,000
20,000
1,000
-
-
1,000
-
-
15,000
20,000
Units
Notes
6N135
Time Logic High to
Logic Low
6N136
µs
CT4502
CT4503
Propagation Delay
TPLH
6N135
Time Logic Low to
Logic High
6N136
µs
CT4502
CT4503
IF = 0mA , VCM=10Vp-p,
6N135
RL=4.1KΩ, TA =25°C
Common Mode
CMH
6N136
IF = 0mA , VCM=10Vp-p,
CT4502
RL=1.9KΩ, TA =25°C
Transient Immunity
V/µs
at Logic High
IF = 0mA , VCM=1500Vp-p,
CT4503
RL=1.9KΩ, TA =25°C
IF = 16mA , VCM=10Vp-p,
6N135
RL=4.1KΩ, TA =25°C
Common Mode
CML
6N136
IF = 16mA , VCM=1500Vp-p,
CT4502
RL=1.9KΩ, TA=25°C
Transient Immunity
V/µs
at Logic Low
IF = 16mA , VCM=1500Vp-p,
CT4503
RL=1.9KΩ, TA=25°C
CT Micro
Proprietary & Confidential
Page 5
Rev 2
May, 2015
6N135, 6N136, CT4502, CT4503
1Mbit/s High Speed Phototransistor Optocoupler
Typical Characteristic Curves
CT Micro
Proprietary & Confidential
Page 6
Rev 2
May, 2015
6N135, 6N136, CT4502, CT4503
1Mbit/s High Speed Phototransistor Optocoupler
CT Micro
Proprietary & Confidential
Page 7
Rev 2
May, 2015
6N135, 6N136, CT4502, CT4503
1Mbit/s High Speed Phototransistor Optocoupler
Test Circuits
CT Micro
Proprietary & Confidential
Page 8
Rev 2
May, 2015
6N135, 6N136, CT4502, CT4503
1Mbit/s High Speed Phototransistor Optocoupler
Test Circuits
CT Micro
Proprietary & Confidential
Page 9
Rev 2
May, 2015
6N135, 6N136, CT4502, CT4503
1Mbit/s High Speed Phototransistor Optocoupler
Package Dimension Dimensions in mm unless otherwise stated
Standard DIP – Through Hole
Gullwing (400mil) Lead Forming – Through Hole (M Type)
CT Micro
Proprietary & Confidential
Page 10
Rev 2
May, 2015
6N135, 6N136, CT4502, CT4503
1Mbit/s High Speed Phototransistor Optocoupler
Surface Mount Lead Forming (S Type)
Surface Mount (Low Profile) Lead Forming (SL Type)
CT Micro
Proprietary & Confidential
Page 11
Rev 2
May, 2015
6N135, 6N136, CT4502, CT4503
1Mbit/s High Speed Phototransistor Optocoupler
Recommended Solder Mask Dimensions in mm unless otherwise stated
Device Marking
CT
CT
6N135
4503
VYWWK
VYWWK
CT
6N135
V
Y
WW
: Denotes “CT Micro”
: Product Number
: VDE Option
: Fiscal Year
: Work Week
K
: Production Code
CT Micro
Proprietary & Confidential
Page 12
Rev 2
May, 2015
6N135, 6N136, CT4502, CT4503
1Mbit/s High Speed Phototransistor Optocoupler
Ordering Information
6N13X(V)(Y)(Z)
or
CT450X(V)(Y)(Z)
X = Part No. (5,6 for 6N13X series), (2,3 for CT450X series)
V = VDE Option ( V or None)
Y = Lead form option (S, SL, M or none)
Z = Tape and reel option (T1, T2 or none)
Option
Description
Quantity
None
Standard 8 Pin Dip
40 Units/Tube
M
Gullwing (400mil) Lead Forming
40 Units/Tube
S(T1)
Surface Mount Lead Forming – With Option 1 Taping
1000 Units/Reel
S(T2)
Surface Mount Lead Forming – With Option 2 Taping
1000 Units/Reel
SL(T1)
Surface Mount (Low Profile) Lead Forming– With Option 1 Taping
1000 Units/Reel
SL(T2)
Surface Mount (Low Profile) Lead Forming– With Option 2 Taping
1000 Units/Reel
CT Micro
Proprietary & Confidential
Page 13
Rev 2
May, 2015
6N135, 6N136, CT4502, CT4503
1Mbit/s High Speed Phototransistor Optocoupler
Carrier Tape Specifications Dimensions in mm unless otherwise stated
Option S(T1) & SL(T1)
Option S(T2) & SL(T2)
CT Micro
Proprietary & Confidential
Page 14
Rev 2
May, 2015
6N135, 6N136, CT4502, CT4503
1Mbit/s High Speed Phototransistor Optocoupler
Reflow Profile
Profile Feature
Pb-Free Assembly Profile
Temperature Min. (Tsmin)
150°C
Temperature Max. (Tsmax)
200°C
Time (ts) from (Tsmin to Tsmax)
60-120 seconds
Ramp-up Rate (tL to tP)
3°C/second max.
Liquidous Temperature (TL)
217°C
Time (tL) Maintained Above (TL)
60 – 150 seconds
Peak Body Package Temperature
260°C +0°C / -5°C
Time (tP) within 5°C of 260°C
30 seconds
Ramp-down Rate (TP to TL)
6°C/second max
Time 25°C to Peak Temperature
8 minutes max.
CT Micro
Proprietary & Confidential
Page 15
Rev 2
May, 2015
6N135, 6N136, CT4502, CT4503
1Mbit/s High Speed Phototransistor Optocoupler
DISCLAIMER
CT MICRO RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS
HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. CT MICRO DOES NOT ASSUME ANY LIABILITY
ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN;
NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
______________________________________________________________________________________
CT MICRO ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR
SYSTEMS WITHOUT EXPRESS WRITTEN APPROVAL OF CT MICRO INTERNATIONAL CORPORATION.
1. Life support devices or systems are devices or
2. A critical component is any component of a life
systems which, (a) are intended for surgical
support device or system whose failure to perform
implant into the body, or (b) support or sustain life,
can be reasonably expected to cause the failure of
or (c) whose failure to perform when properly used
the life support device or system, or to affect its
in accordance with instruction for use provided in
safety or effectiveness.
the labelling, can be reasonably expected to result
in significant injury to the user.
CT Micro
Proprietary & Confidential
Page 16
Rev 2
May, 2015
Similar pages