CREE LMD800-0120-C2A0-7030000 Led module driver Datasheet

Cree® LMD800 LED Module Driver
Product Description
Features
Table of Contents
Cree® LED modules provide lighting
•
Input voltage: 120‑277 V
Order Code...................................................2
designers and manufacturers with simple,
•
0/1-10 V dimming support
Characteristics - LMD800 120- to 277‑V
easy-to-adopt LED lighting solutions that
•
Optimized for Cree LMH2 8000‑lm
0/1-10 V Dimming Driver.............................2
light sources
Dimming.......................................................2
Enables California Title 24
Mechanical Dimensions..............................2
compliance
Wiring Diagrams...........................................4
reduce luminaire development time and
speed time-to-market. The Cree LMD800
®
LED module driver is specifically designed
•
to work with the Cree LMH2 8000‑lumen
Thermal Design............................................5
light source to jump-start the design
Emergency Battery Operation.....................5
process for recessed downlights, wall
Safety and Regulatory Notes.......................5
sconces or pendant lights in demanding
Packaging.....................................................6
CLM-DS23 Rev 0E
LED Module Driver data sheet
end markets such as retail, museums,
www.cree.com/Xlamp
hospitality and restaurants.
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp®
are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
LMD800 LED Module Driver
Order Code
Nominal Input
Voltage (VAC)
Frequency (Hz)
Typical Output Current
(mA)
Dimming
Order Code
120-277
50/60
2000
0/1-10 V
LMD800-0120-C2A0-7030000
Characteristics - LMD800 120- to 277‑V 0/1-10 V Dimming Driver
Order Code: LMD800-0120-C2A0-7030000
Characteristics
Unit
Minimum
Input voltage range
VAC
108
Input power
Typical
305
W
Output current
mA
Output voltage
V
Driver efficiency (@ 55 °C) - with LMH2 8000‑lm light
source
%
105
130
2000
28
54
90
Power factor - with LMH2 8000‑lm light source
•
Maximum
0.95
Dimming current @ 120 V
mA
.05
Dimming current @ 277 V
mA
.05
LED driver case temperature
°C
-40
75
3-D models (.STEP files) for the LMD800 LED module driver are available on the Cree website by selecting the Documentation tab on the LMH2
product page.
Dimming
The LMH2 8000‑lm light source can use the LMD800 LED module driver with 0/1-10 V dimming.
Driver
LMD800-0120-C2A0-7030000
Input Voltage
Dimming
Lowest Light Level
120-277 V
0/1-10 V
1%
Mechanical Dimensions
Physical Characteristics of the LMD800 Driver
Physical Characteristic
LMD800
120- to 277-V Driver
Weight (g)
440
Maximum height (mm)
47
Maximum length (mm)
160
Maximum width (mm)
63
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
2
LMD800 LED Module Driver
LMD800 120- to 277-V Driver1
160
160
61.6
61.6
23
23
50
50
1
47
47
Tc
Tc
6-32
6-32 MOUNTING
MOUNTING
STUDS
STUDS
39
39
88
WIRE LL == 150mm
150mm
WIRE
TYP.
TYP.
1144
..44
50.8
50.8
63
63
Dimensions for all the diagrams are in mm and are for reference only. For exact dimensions and tolerances, refer to the 3-D models (.STEP files) for the LMD800 driver
available by selecting the Documentation tab on the LMH2 product page.
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
3
LMD800 LED Module Driver
Wiring Diagrams
Electrical Connection
LMH2 LED module operation is accomplished by connecting the AC mains to the two (2) lead wires (line and neutral) from the driver and
connecting the driver output wires to the input leads on the Cree LMH2 light source, as indicated in the following wiring diagram.
The LED module driver lead wires are 150 mm long, 18 AWG with the ends stripped 10 mm.
LMD800 120- to 277‑V Driver
Wiring Strain Relief
LMD800 LED module drivers must not be suspended directly by the leads. Though the wiring from the LMD800 LED module driver is
internally strain relieved, additional strain relief methods must be employed if the luminaire is to be suspended solely by the wiring, as in
a pendant luminaire.
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
4
LMD800 LED Module Driver
Thermal Design
Expected LMD800 Lifetime versus Temperature at Tc Point
Tc (°C) @ 25 °C Room Ambient
Expected Operation Life (Hours)
LMD800
120- to 277-V
0/1-10 V Dimming Driver
50,000
75
Emergency Battery Operation
The LMD800 LED module driver is a constant‑current supply. Interrupting the driver current with a battery supply is an acceptable method
of emergency or power outage operation. An acceptable installation should also include a switching mechanism that prevents the battery
power from entering the driver through the DC output leads. Confirming backup power supply compatibility is the responsibility of the
luminaire manufacturer or installer. Please refer to the backup power supply manufacturer’s instructions for installation and further
product information.
Safety and Regulatory Notes
The following table shows the safety and regulatory certifications for the LMD800 LED module driver.
LMD800 120- to 277‑VAC Driver
Standard
File Number
UL/cUL recognized (UL8750)
LVLE for US and Canada
UL – Damp rated
E333437
Air handling (plenum)
Safety
5VA flame rating
EN 61347-1
EN 61347-2-13
CE SELV equivalent
IP-20
EN 55015
IEC 61000-3-2
Electromagnetic
compatibility
IEC 61000-3-3
IEC 61547
FCC 47 CFR Part 15 Class B/
ICES 03
Regulatory
Environmental
E1/2014/60038
E1/2014/60036C
E1/2014/60037
IEEE C.62.41-1991 Class A (surge)
NEMA 410
RoHS
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
5
LMD800 LED Module Driver
Safety Certification
Together, the LMH2 light source combined with the LMD800 LED module driver is “suitable for damp locations; covered ceilings.” Final
luminaire designs should go through safety certification as required, which is the responsibility of the luminaire manufacturer.
Packaging
LMD800 120- to 277–V LED module drivers are packaged in boxes of 5, which are then combined in cartons of 5 boxes, or 25 LMD800
120- to 277–V drivers.
Box and carton sizes are as follows.
Box of 5 LMD800 120- to 277‑V LED module drivers: 490 x 235 x 90 mm
Carton of 5 LMD800 120- to 270‑V driver boxes: 510 x 510 x 255 mm
Copyright © 2014-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
6
Similar pages