UTC MPSA55-T92-K Npn mpsa05 pnp mpsa55 Datasheet

UNISONIC TECHNOLOGIES CO., LTD
MPSA05/55
AMPLIFIER TRANSISTOR
NPN MPSA05
PNP MPSA55
„
FEATURES
* Collector-Emitter Voltage: VCEO=60V
1
TO-92
„
ORDERING INFORMATION
Ordering Number
Normal
Lead Free
Halogen Free
MPSA05-T92-B
MPSA05L-T92-B
MPSA05G-T92-B
MPSA05-T92-K
MPSA05L-T92-K
MPSA05G-T92-K
MPSA55-T92-B
MPSA55L-T92-B
MPSA55G-T92-B
MPSA55-T92-K
MPSA55L-T92-K
MPSA55G-T92-K
Note: Pin assignment: E: EMITTER, C: COLLECTOR, B: BASE
www.unisonic.com.tw
Copyright © 2011 Unisonic Technologies Co., LTD
Package
TO-92
TO-92
TO-92
TO-92
Pin Assignment
1
2
3
E
B
C
E
B
C
E
B
C
E
B
C
Packing
Tape Box
Bulk
Tape Box
Bulk
1 of 3
QW-R201-034.Ba
MPSA05/55
„
AMPLIFIER TRANSISTOR
ABSOLUTE MAXIMUM RATING (TA=25℃, unless otherwise specified)
PARAMETER
SYMBOL
RATINGS
UNIT
Collector-base voltage
VCBO
60
V
Collector-emitter voltage
VCEO
60
V
Emitter-base voltage
VEBO
4
V
Collector current - Continuous
IC
500
mA
625
mW
Total device dissipation, @TA=25℃
PD
5
mW/℃
Derate above 25℃
1500
mW
Total device dissipation, @TC=25℃
PD
12
mW/℃
Derate above 25℃
Junction Temperature
TJ
125
℃
Storage Temperature
TSTG
-40 ~ +150
℃
Note: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
„
THERMAL DATA
PARAMETER
SYMBOL
RATINGS
Thermal resistance, junction to ambient (Note)
RθJA
200
Thermal resistance, junction to case
RθJC
83.3
Note: RθJA is measured with the device soldered into a typical printed circuit board.
„
UNIT
℃/W
℃/W
ELECTRICAL CHARACTERISTICS (Ta=25℃, unless otherwise specified)
PARAMETER
OFF CHARACTERISTICS
Collector-emitter breakdown voltage
(note 1)
Emitter-base breakdown voltage
Collector cutoff current
Collector cutoff current
ON CHARACTERISTICS
DC current gain
SYMBOL
TEST CONDITIONS
V(BR)CEO
IC=1.0mA, IB=0
60
V(BR)EBO
ICES
ICBO
IE=100μA, Ic=0
VCE=60V, IB=0
VCB=60V, IE=0
4
hFE
IC=10mA, VCE=1V
IC=100mA, VCE=1V
IC=100mA, IB=10mA
IC=100mA, VCE=1V
Collector-emitter saturation voltage
VCE(SAT)
Base-emitter on voltage
VBE(ON)
SMALL-SIGNAL CHARACTERISTICS
MPSA05
IC=10mA, VCE=2V, f=100MHz
Current gain bandwidth
fT
product (note 2)
MPSA55
IC=100mA, VCE=1V, f=100MHz
Note 1. Pulse test: PW<=300μs, Duty Cycle<=2%
2. fT is defined as the frequency at which IhfeI extrapolates to unity.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
MIN
TYP
MAX UNIT
V
0.1
0.1
V
μA
μA
0.25
1.2
V
V
100
100
100
50
MHz
MHz
2 of 3
QW-R201-034.Ba
MPSA05/55
AMPLIFIER TRANSISTOR
SWITCHING TIME TEST CIRCUIT
„
TURN-ON TIME
VCC
-1.0V
5.0µs
TURN-OFF TIME
100
VCC
+VBB
+40V
+40V
100
RL
OUTPUT
+10V
VIN
0
tr=3.0ns
5.0µF
OUTPUT
VIN
RB
S
RL
6.0pF
5.0µF
100
RB
S
6.0pF
100
5.0µs
tr=3.0ns
Figure 1. (Note: Total shunt capacitance of test jig and connectors for PNP test circuits, reverse all voltage polarities.)
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 3
QW-R201-034.Ba
Similar pages