AVX GX0S Ultra broad band capacitor Datasheet

GX0S Series
Ultra Broad Band Capacitor
ADVANTAGES
APPLICATIONS
• Ultra-Broadband performance
• Ultra-Low Insertion Loss
• Semi-Conductor Data
Communications Customers
• Excellent Return Loss
• Receiver Optical Sub-Assemblies
• Transimpedance Amplifier
Customers
• Test Equipment Manufactures
The GX0S Series was developed to address DC Blocking issues
from ~16KHz (-3dB roll-off) to 40GHz and was designed
specifically for mounting on strip lines with widths less than
20mils. In most applications, insertion loss (as shown below) will
typically fall in the range of 0.4dB. Insertion loss at frequencies
higher than 40GHz will be in part dependent on installation
parameters. These devices utilize AVX’s patented precision thin
film termination process and are especially well suited for high
volume solder assembly.
Both Ni/Sn and Ni/Au terminations are available to cover a wide
range of attachment processes.
Au terminated units are wire bondable. Users, therefore, may find
these devices useful in bypass applications when wire bonding is
a necessary part of the manufacturing process.
GX0S products (like all GX Series parts) are RoHS compliant.
More information can be obtained by contacting the factory or
your local AVX representative.
GX0S Series – Return Loss (S11)
GX0S Series – Insertion Loss (S21)
0.0
0
-10
Magnitude dB
Magnitude dB
-0.5
-1.0
-1.5
-2.0
-20
-30
-40
-50
(Typical)
-2.5
(Typical)
-60
0
5
10
15
20
25
30
35
40
0
5
10
Frequency (GHz)
15
20
25
30
35
40
Frequency (GHz)
Test Parameters:
All testing done on 10-mil thick Rogers R03006 Microstrip board, with device under test subtending a 10 mil gap in a
13.4 mil wide center trace (nominal 50 Ohm characteristic impedance)
Figure 1
MECHANICAL SPECIFICATIONS
0.38 ± 0.05
(0.015 ± 0.002)
0.86 ± 0.05
(0.034 ± 0.002)
Average Delta Cap (%)
0.13 ± 0.05
(0.005 ± 0.002)
8
0
-8
-15
-23
-30
-75
0.33 ± 0.05
(0.013 ± 0.002)
18
-50
-25
0
25
50
Temperature (ºC)
75
100
125
150
GX0S Series
Ultra Broad Band Capacitor
ELECTRICAL SPECIFICATIONS
Capacitance
Voltage Rating/Operating Temperature
Dielectric Withstanding Voltage
Insulation Resistance
Temperature Coefficient
0.1 uF ±20%
6.3 VDC @ 85ºC, 4 VDC @ 125ºC
250% WVDC
10,000 Meg Ohms @ 25ºC, 1,000 Meg Ohms @ 125ºC
6.3 VDC (X5R), 4 VDC - See Figure 1
HOW TO ORDER
GX
0S
6D
104
M
A
T
D
Style
Case Size
Special
Voltage/Dielectric
6D = 6.3VDC/X5R
4.0VDC/125ºC
(See Fig. 1)
Capacitance
104 = 0.1uF
EIA Cap Code
in pF
Tolerance
M = ±20%
Failure Rate
A = Std
Termination
T = Ni-Sn
(Standard)
7 = Ni-Au
Packaging
D = 4000 pcs, 3" T&R
D-500 = 500 pcs, 3" T&R
D-1000 = 1000 pcs, 3" T&R
19
Similar pages