SICK GL6-P1212 Photoelectric sensor Datasheet

Online data sheet
GL6-P1212
G6
PHOTOELECTRIC SENSORS
GL6-P1212 | G6
PHOTOELECTRIC SENSORS
A
B
C
D
E
F
H
I
J
K
L
M
N
O
P
Q
R
S
T
Ordering information
Type
Part no.
GL6-P1212
1060815
Other models and accessories
www.sick.com/G6
Illustration may differ
Detailed technical data
Features
Sensor/ detection principle
Photoelectric retro-reflective sensor, Dual lens
Dimensions (W x H x D)
12 mm x 31.5 mm x 21 mm
Housing design (light emission)
Rectangular
Sensing range max.
≤ 6 m 1)
Sensing range
≤ 5 m 1)
Type of light
Visible red light
Light source
PinPoint LED 2)
Light spot size (distance)
Ø 8 mm (350 mm)
Wave length
650 nm
Adjustment
Potentiometer, 270°
1)
2)
Reflector PL80A.
Average service life: 100,000 h at TU = +25 °C.
Mechanics/electronics
Supply voltage
1)
2)
3)
4)
5)
6)
7)
8)
9)
Limit values when operated in short-circuit protected network: max. 8 A.
May not exceed or fall below Uv tolerances.
Without load.
At Uv > 24 V, IA max. = 50 mA.
Signal transit time with resistive load.
With light/dark ratio 1:1.
Do not bend below 0 °C.
A = VS connections reverse-polarity protected.
B = inputs and output reverse-polarity protected.
10)
11)
2
10 V DC ... 30 V DC 1)
D = outputs overcurrent and short-circuit protected.
Temperature stability following adjustment +/-10 °C.
PHOTOELECTRIC SENSORS | SICK
Online data sheet | 2017-12-07 19:30:42
Subject to change without notice
GL6-P1212 | G6
PHOTOELECTRIC SENSORS
Ripple
± 10 % 2)
Power consumption
≤ 30 mA 3)
Switching output
PNP
Switching mode
Light/dark switching
Switching mode selector
Selectable via light/dark selector
Signal voltage PNP HIGH/LOW
VS - (≤ 3 V) / approx. 0 V
Output current Imax.
≤ 100 mA 4)
Response time
< 625 µs 5)
Switching frequency
1,000 Hz 6)
Connection type
Cable, 3-wire, 2 m 7)
Cable material
PVC
Circuit protection
A 8)
B 9)
D 10)
Protection class
III
Weight
60 g
Polarisation filter
✔
Housing material
Plastic, ABS/PC
Optics material
Plastic, PMMA
Enclosure rating
IP67
Items supplied
Stainless steel mounting bracket (1.4301/304) BEF-W100-A, Reflector P250
Ambient operating temperature
–25 °C ... +55 °C 11)
Ambient storage temperature
–40 °C ... +70 °C
UL File No.
NRKH.E348498 & NRKH7.E348498
1)
2)
3)
4)
5)
6)
7)
8)
9)
Limit values when operated in short-circuit protected network: max. 8 A.
May not exceed or fall below Uv tolerances.
Without load.
At Uv > 24 V, IA max. = 50 mA.
Signal transit time with resistive load.
With light/dark ratio 1:1.
Do not bend below 0 °C.
A = VS connections reverse-polarity protected.
B = inputs and output reverse-polarity protected.
10)
11)
D = outputs overcurrent and short-circuit protected.
Temperature stability following adjustment +/-10 °C.
Classifications
ECl@ss 5.0
27270902
ECl@ss 5.1.4
27270902
ECl@ss 6.0
27270902
ECl@ss 6.2
27270902
ECl@ss 7.0
27270902
ECl@ss 8.0
27270902
ECl@ss 8.1
27270902
2017-12-07 19:30:42 | Online data sheet

Subject
to change without notice
PHOTOELECTRIC SENSORS | SICK
3
GL6-P1212 | G6
PHOTOELECTRIC SENSORS
A
B
C
D
E
F
H
I
J
K
L
M
N
O
P
Q
R
S
T
ECl@ss 9.0
27270902
ETIM 5.0
EC002717
ETIM 6.0
EC002717
UNSPSC 16.0901
39121528
Adjustments possible
Adjustment possibility
5
4
+
–
7
④ LED indicator green: Supply voltage active
⑤ LED indicator yellow: Status of received light beam
⑦ Sensitivity control: potentiometer
Connection diagram
Cd-043
BN
BU
BK
4
+ (L+)
- (M)
Q
PHOTOELECTRIC SENSORS | SICK
Online data sheet | 2017-12-07 19:30:42
Subject to change without notice
GL6-P1212 | G6
PHOTOELECTRIC SENSORS
Characteristic curve
GL6
Operating reserve
100
1
10
4
3
5
2
Operatingrange
1
Sensing range
max. typ.
1
2
(3.28)
(6.56)
3
4
(9.84) (13.12)
5
6
(16.4)
(19.69)
Distance in m (feet)
①
②
③
④
⑤
Reflector PL80A
Reflector PL40A
Reflector P250
Reflector PL20A
Reflective tape REF-IRF-56
Light spot size
GL6, GL6G
Ø 80 mm
Ø 130 mm
Sensor
Ø 8 mm
Ø 25 mm
0.35
1.0
3.0
2017-12-07 19:30:42 | Online data sheet

Subject
to change without notice
5.0
Distance [m]
PHOTOELECTRIC SENSORS | SICK
5
GL6-P1212 | G6
PHOTOELECTRIC SENSORS
A
B
C
D
E
F
Sensing range diagram
H
I
J
K
L
M
N
O
P
Q
R
S
T
Dimensional drawing (Dimensions in mm (inch))
GL6, GL6G
1
0.03
0.07
2
3
0.03
0.07
4
5
0.03
0.07
2.2
0.2
0.25
1.6 1.8
5.0
6.0
3.8 4.3
0.03
0.07
3.5 4.0
2.5
2
4
6
8
(6.56)
(13.12)
(19.69)
(26.25)
0
Distance in m (feet)
Sensing range
Sensing range max.
Reflector PL80A
Reflector PL40A
Reflector P250
Reflector PL20A
Reflective tape REF-IRF-56
4
3 (0.12)
9.7
(0.38)
①
②
③
④
⑤
⑥
5
6
31.5 (1.24)
11.4
25.4 (1.00)
3
28.5 (1.12)
3
L
D
(0.45)
9.7
7.6
0.5 (0.02)
(0.38)
1
2
21 (0.83)
(0.30)
0.5 (0.02)
①
②
③
④
⑤
18.3
12
(0.72)
(0.47)
Optical axis, receiver
Optical axis, sender
Mounting holes M3
LED indicator green: Supply voltage active
LED indicator yellow: Status of received light beam
Light/ dark rotary switch: L = light switching, D = dark switching
Recommended accessories
Other models and accessories
www.sick.com/G6
Brief description
Type
Part no.
BEF-KHS-ISG6
2075080
BEF-SG-G6
2069044
Universal bar clamp systems
Clamp bar to fix G6 sensors on rods of 10 mm, clamp-on design up to 4 mm wall thickness, aluminum (clamp bar), stainless steel (bracket), clamp bar for 10 mm rod mounting and clamp function, mounting bracket, mounting hardware
Device protection (mechanical)
Stainless steel 1.4301 (SVS 304), 3 mm thick protective sleeve for G6, stainless steel
1.4301, mounting hardware included
6
PHOTOELECTRIC SENSORS | SICK
Online data sheet | 2017-12-07 19:30:42
Subject to change without notice
GL6-P1212 | G6
PHOTOELECTRIC SENSORS
Brief description
Type
Part no.
BEF-WN-G6
2062909
BEF-SLIT MASK-G6
2075254
Rectangular, screw connection, 47 mm x 47 mm, PMMA/ABS, Screw-on, 2 hole mounting
P250
5304812
Rectangular, screw connection, 56 mm x 28 mm, PMMA/ABS, Screw-on, 2 hole mounting
PL30A
1002314
Rectangular, screw connection, 80 mm x 80 mm, PMMA/ABS, Screw-on, 2 hole mounting
PL80A
1003865
Fine triple reflector, screw connection, suitable for laser sensors, 18 mm x 18 mm, PMMA/ABS, Screw-on, 2 hole mounting
PL10F
5311210
REF-IRF-56
5314244
PL22-3
1004488
Mounting brackets and plates
Masks
Slit mask, vertical slots, slot width: 1.0 mm, 2 pieces, black, Aluminum, Slit mask
(2 pieces)
Reflectors
Self-adhesive
Round, plugable for metal plates, PMMA/ABS, Plug-in for sheets
2017-12-07 19:30:42 | Online data sheet

Subject
to change without notice
PHOTOELECTRIC SENSORS | SICK
7
Online data sheet
SICK at a glance
SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applications. A unique range of products and services creates the perfect basis for controlling processes securely
and efficiently, protecting individuals from accidents and preventing damage to the environment.
We have extensive experience in a wide range of industries and understand their processes and requirements. With intelligent sensors, we can deliver exactly what our customers need. In application centers in
Europe, Asia and North America, system solutions are tested and optimized in accordance with customer
specifications. All this makes us a reliable supplier and development partner.
Comprehensive services complete our offering: SICK LifeTime Services provide support throughout the machine life cycle and ensure safety and productivity.
For us, that is “Sensor Intelligence.”
Worldwide presence:
Contacts and other locations – www.sick.com
SICK AG | Waldkirch | Germany | www.sick.com
Similar pages