AD AD8057ARTZ-REEL Low cost, high performance voltage feedback, 325 mhz amplifier Datasheet

FEATURES
CONNECTION DIAGRAMS
Low cost single (AD8057) and dual (AD8058)
High speed
325 MHz, −3 dB bandwidth (G = +1)
1000 V/μs slew rate
Gain flatness: 0.1 dB to 28 MHz
Low noise
7 nV/√Hz
Low power
5.4 mA/amplifier typical supply current @ 5 V
Low distortion
−85 dBc @ 5 MHz, RL = 1 kΩ
Wide supply range from 3 V to 12 V
Small packaging
AD8057 is available in an 8-lead SOIC and 5-lead SOT-23
AD8058 is available in an 8-lead SOIC and an 8-lead MSOP
AD8057
VOUT 1
5
+VS
4
–IN
+IN 3
(Not to Scale)
01064-001
–VS 2
Figure 1. RT-5 (SOT-23)
AD8057
NC 1
8
NC
–IN 2
7
+VS
+IN 3
6
VOUT
–VS 4
5
NC
(Not to Scale)
01064-002
NC = NO CONNECT
Figure 2. R-8 (SOIC)
APPLICATIONS
Imaging
DVD/CD
Photodiode preamp
Analog-to-digital driver
Professional cameras filters
OUT1
1
–IN1
AD8058
8
+VS
2
7
OUT2
+IN1
3
6
–IN2
–VS
4
5
+IN2
(Not to Scale)
01064-003
Data Sheet
Low Cost, High Performance
Voltage Feedback, 325 MHz Amplifier
AD8057/AD8058
Figure 3. RM-8 (MSOP) and R-8 (SOIC)
GENERAL DESCRIPTION
Rev. D
4
3
2
1
G = +1
0
–1
G = +5
–2
G = +2
–3
G = +10
–4
–5
1
10
100
FREQUENCY (MHz)
1000
01064-004
The AD8057 and AD8058 are available in standard SOIC
packaging as well as tiny 5-lead SOT-23 (AD8057) and 8-lead
MSOP (AD8058) packages. These amplifiers are available in the
industrial temperature range of −40°C to +85°C.
5
GAIN (dB)
The AD8057 (single) and AD8058 (dual) are very high performance amplifiers with a very low cost. The balance between
cost and performance make them ideal for many applications.
The AD8057 and AD8058 reduce the need to qualify a variety
of specialty amplifiers. The AD8057 and AD8058 are voltage
feedback amplifiers with the bandwidth and slew rate normally
found in current feedback amplifiers. The AD8057 and AD8058
are low power amplifiers having low quiescent current and a wide
supply range from 3 V to 12 V. They have noise and distortion
performance required for high end video systems as well as dc
performance parameters rarely found in high speed amplifiers.
Figure 4. Small Signal Frequency Response
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2010–2013 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com
Powered by TCPDF (www.tcpdf.org)
IMPORTANT LINKS for the AD8057_8058*
Last content update 09/30/2013 12:50 am
PARAMETRIC SELECTION TABLES
DESIGN TOOLS, MODELS, DRIVERS & SOFTWARE
Find Similar Products By Operating Parameters
High Speed Amplifiers Selection Table
dBm/dBu/dBv Calculator
Analog Filter Wizard 2.0
Power Dissipation vs Die Temp
ADIsimOpAmp™
OpAmp Stability
AD8057/AD8058 SPICE Macro-Model
DOCUMENTATION
AN-649: Using the Analog Devices Active Filter Design Tool
AN-581: Biasing and Decoupling Op Amps in Single Supply
Applications
AN-402: Replacing Output Clamping Op Amps with Input Clamping
Amps
AN-417: Fast Rail-to-Rail Operational Amplifiers Ease Design
Constraints in Low Voltage High Speed Systems
MT-060: Choosing Between Voltage Feedback and Current Feedback
Op Amps
MT-059: Compensating for the Effects of Input Capacitance on VFB
and CFB Op Amps Used in Current-to-Voltage Converters
MT-058: Effects of Feedback Capacitance on VFB and CFB Op Amps
MT-056: High Speed Voltage Feedback Op Amps
MT-053: Op Amp Distortion: HD, THD, THD + N, IMD, SFDR, MTPR
MT-052: Op Amp Noise Figure: Don’t Be Mislead
MT-050: Op Amp Total Output Noise Calculations for Second-Order
System
MT-049: Op Amp Total Output Noise Calculations for Single-Pole
System
MT-048: Op Amp Noise Relationships: 1/f Noise, RMS Noise, and
Equivalent Noise Bandwidth
MT-047: Op Amp Noise
MT-033: Voltage Feedback Op Amp Gain and Bandwidth
MT-032: Ideal Voltage Feedback (VFB) Op Amp
A Stress-Free Method for Choosing High-Speed Op Amps
FOR THE AD8057
UG-127: Universal Evaluation Board for High Speed Op Amps in
SOT-23-5/SOT-23-6 Packages
UG-101: Evaluation Board User Guide
FOR THE AD8058
UG-128: Universal Evaluation Board for Dual High Speed Op Amps in
SOIC Packages
UG-129: Evaluation Board User Guide
DESIGN COLLABORATION COMMUNITY
Collaborate Online with the ADI support team and other designers
about select ADI products.
Follow us on Twitter: www.twitter.com/ADI_News
Like us on Facebook: www.facebook.com/AnalogDevicesInc
DESIGN SUPPORT
Submit your support request here:
Linear and Data Converters
Embedded Processing and DSP
Telephone our Customer Interaction Centers toll free:
Americas:
Europe:
China:
India:
Russia:
1-800-262-5643
00800-266-822-82
4006-100-006
1800-419-0108
8-800-555-45-90
Quality and Reliability
Lead(Pb)-Free Data
SAMPLE & BUY
AD8057
AD8058
View Price & Packaging
Request Evaluation Board
Request Samples
Check Inventory & Purchase
Find Local Distributors
EVALUATION KITS & SYMBOLS & FOOTPRINTS
View the Evaluation Boards and Kits page for the AD8057
View the Evaluation Boards and Kits page for the AD8058
Symbols and Footprints for the AD8057
Symbols and Footprints for the AD8058
* This page was dynamically generated by Analog Devices, Inc. and inserted into this data sheet.
Note: Dynamic changes to the content on this page (labeled 'Important Links') does not
constitute a change to the revision number of the product data sheet.
This content may be frequently modified.
AD8057/AD8058
Data Sheet
TABLE OF CONTENTS
Features .............................................................................................. 1
Typical Performance Characteristics ..............................................6
Applications ....................................................................................... 1
Test Circuits ..................................................................................... 12
Connection Diagrams ...................................................................... 1
Applications Information .............................................................. 13
General Description ......................................................................... 1
Driving Capacitive Loads .......................................................... 13
Revision History ............................................................................... 2
Video Filter .................................................................................. 13
Specifications..................................................................................... 3
Differential Analog-to-Digital Driver ..................................... 14
Absolute Maximum Ratings............................................................ 5
Layout .......................................................................................... 14
Maximum Power Dissipation ..................................................... 5
Outline Dimensions ....................................................................... 15
ESD Caution .................................................................................. 5
Ordering Guide .......................................................................... 15
REVISION HISTORY
9/13—Rev. C to Rev. D
Changes to Output Voltage Swing Parameter, Table 3 ................. 4
Updated Outline Dimensions ........................................................15
Changes to Ordering Guide ...........................................................16
10/10—Rev. B to Rev. C
Updated Format .................................................................. Universal
Change to Third-Order Intercept Parameter, Table 1 ................. 3
Changes to Input Common-Mode Voltage Range Parameter,
Table 2 ................................................................................................ 4
Changes to Figure 32 ...................................................................... 10
Changes to Figure 35 ...................................................................... 11
Changes to Figure 41 and Figure 42 ............................................. 12
Changes to Figure 44 and Figure 45............................................. 13
Changes to Ordering Guide .......................................................... 16
8/03—Rev. A to Rev. B
Renumbered Figures and TPCs ........................................ Universal
Changes to Ordering Guide .............................................................4
Change to Figure 8 ......................................................................... 12
Update Outline Dimensions ......................................................... 14
Rev. D | Page 2 of 16
Data Sheet
AD8057/AD8058
SPECIFICATIONS
@ TA = 25°C, VS = ±5 V, RL = 100 Ω, RF = 0 Ω, gain = +1, unless otherwise noted.
Table 1.
Parameter
DYNAMIC PERFORMANCE
–3 dB Bandwidth
Bandwidth for 0.1 dB Flatness
Slew Rate
Settling Time to 0.1%
NOISE/HARMONIC PERFORMANCE
Total Harmonic Distortion
SFDR
Third-Order Intercept
Crosstalk, Output to Output
Input Voltage Noise
Input Current Noise
Differential Gain Error
Differential Phase Error
Overload Recovery
DC PERFORMANCE
Input Offset Voltage
Conditions
Min
MHz
MHz
MHz
MHz
V/µs
V/µs
ns
fC = 5 MHz, VO = 2 V p-p, RL = 1 kΩ
fC = 20 MHz, VO = 2 V p-p, RL = 1 kΩ
f = 5 MHz, VO = 2 V p-p, RL = 150 Ω
f = 5 MHz, VO = 2 V p-p
f = 5 MHz, G = +2
f = 100 kHz
f = 100 kHz
NTSC, G = +2, RL = 150 Ω
NTSC, G = +2, RL = 1 kΩ
NTSC, G = +2, RL = 150 Ω
NTSC, G = +2, RL = 1 kΩ
VIN = 200 mV p-p, G = +1
–85
–62
–68
−35
−60
7
0.7
0.01
0.02
0.15
0.01
30
dBc
dBc
dB
dBm
dB
nV/√Hz
pA/√Hz
%
%
Degrees
Degrees
ns
1
2.5
3
0.5
3.0
VO = ±2.5 V, RL = 2 kΩ
50
55
mV
mV
μV/°C
µA
µA
µA
dB
VO = ±2.5 V, RL = 150 Ω
50
52
dB
10
2
MΩ
pF
V
dB
TMIN to TMAX
Capacitive Load Drive
POWER SUPPLY
Operating Range
Quiescent Current for AD8057
Quiescent Current for AD8058
Power Supply Rejection Ratio
Unit
325
95
175
30
850
1150
30
Input Offset Voltage Drift
Input Bias Current
INPUT CHARACTERISTICS
Input Resistance
Input Capacitance
Input Common-Mode Voltage Range
Common-Mode Rejection Ratio
OUTPUT CHARACTERISTICS
Output Voltage Swing
Max
G = +1, VO = 0.2 V p-p
G = –1, VO = 0.2 V p-p
G = +1, VO = 2 V p-p
G = +1, VO = 0.2 V p-p
G = +1, VO = 2 V step, RL = 2 kΩ
G = +1, VO = 4 V step, RL = 2 kΩ
G = +2, VO = 2 V step
TMIN to TMAX
Input Offset Current
Open-Loop Gain
Typ
5
2.5
±0.75
+Input
RL = 1 kΩ
VCM = ±2.5 V
RL = 2 kΩ
RL = 150 Ω
30% overshoot
−4.0
48
−4.0
Rev. D | Page 3 of 16
+4.0
V
V
pF
±6
7.5
15
V
mA
mA
dB
±3.9
30
±1.5
VS = ±5 V to ±1.5 V
+4.0
60
54
±5.0
6.0
14.0
59
AD8057/AD8058
Data Sheet
@ TA = 25°C, VS = 5 V, RL = 100 Ω, RF = 0 Ω, gain = +1, unless otherwise noted.
Table 2.
Parameter
DYNAMIC PERFORMANCE
–3 dB Bandwidth
Bandwidth for 0.1 dB Flatness
Slew Rate
Settling Time to 0.1%
NOISE/HARMONIC PERFORMANCE
Total Harmonic Distortion
Crosstalk, Output to Output
Input Voltage Noise
Input Current Noise
Differential Gain Error
Differential Phase Error
Conditions
Min
MHz
MHz
MHz
V/µs
ns
fC = 5 MHz, VO = 2 V p-p, RL = 1 kΩ
fC = 20 MHz, VO = 2 V p-p, RL = 1 kΩ
f = 5 MHz, G = +2
f = 100 kHz
f = 100 kHz
NTSC, G = +2, RL = 150 Ω
NTSC, G = +2, RL = 1 kΩ
NTSC, G = +2, RL = 150 Ω
NTSC, G = +2, RL = 1 kΩ
–75
–54
−60
7
0.7
0.05
0.05
0.10
0.02
dBc
dBc
dB
nV/√Hz
pA/√Hz
%
%
Degrees
Degrees
1
2.5
3
0.5
3.0
VO = ±1.5 V, RL = 2 kΩ to midsupply
50
55
mV
mV
μV/°C
µA
µA
µA
dB
VO = ±1.5 V, RL = 150 Ω to midsupply
45
52
dB
48
10
2
0.9 to 3.4
60
MΩ
pF
V
dB
0.9 to 3.8
1.2 to 3.4
30
V
V
pF
Input Offset Voltage Drift
Input Bias Current
TMIN to TMAX
Capacitive Load Drive
POWER SUPPLY
Operating Range
Quiescent Current for AD8057
Quiescent Current for AD8058
Power Supply Rejection Ratio
Unit
300
155
28
700
35
TMIN to TMAX
INPUT CHARACTERISTICS
Input Resistance
Input Capacitance
Input Common-Mode Voltage Range
Common-Mode Rejection Ratio
OUTPUT CHARACTERISTICS
Output Voltage Swing
Max
G = +1, VO = 0.2 V p-p
G = +1, VO = 2 V p-p
VO = 0.2 V p-p
G = +1, VO = 2 V step, RL = 2 kΩ
G = +2, VO = 2 V step
DC PERFORMANCE
Input Offset Voltage
Input Offset Current
Open-Loop Gain
Typ
5
2.5
0.75
+Input
RL = 1 kΩ
VCM = ±2.5 V
RL = 2 kΩ
RL = 150 Ω
30% overshoot
3
54
Rev. D | Page 4 of 16
5.0
5.4
13.5
58
10
7.0
14
V
mA
mA
dB
Data Sheet
AD8057/AD8058
ABSOLUTE MAXIMUM RATINGS
MAXIMUM POWER DISSIPATION
Table 3.
Lead Temperature (Soldering 10sec)
1
0.8 W
0.5 W
0.6 W
±VS
±4.0 V
Observe power
derating curves
−65°C to +125°C
−40°C to +85°C
2.0
TJ = 150°C
300°C
Specification is for device in free air:
8-lead SOIC package: θJA = 160°C/W
5-lead SOT-23-5 package: θJA = 240°C/W
8-Lead MSOP package: θJA = 200°C/W
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
1.5
8-LEAD SOIC
1.0
8-LEAD MSOP
0.5
SOT-23-5
0
–50 –40 –30 –20 –10 0 10 20 30 40 50 60
AMBIENT TEMPERATURE (°C)
70
80
90
Figure 5. Maximum Power Dissipation vs. Ambient Temperature
ESD CAUTION
Rev. D | Page 5 of 16
01064-005
Storage Temperature Range (R)
Operating Temperature Range (A Grade)
The maximum power that can be safely dissipated by the
AD8057/AD8058 is limited by the associated rise in junction
temperature. Exceeding a junction temperature of 175°C for
an extended period can result in device failure. Although the
AD8057/AD8058 is internally short-circuit protected, this may
not be sufficient to guarantee that the maximum junction temperature (150°C) is not exceeded under all conditions. To ensure
proper operation, it is necessary to observe the maximum power
derating curves.
Rating
12.6 V
MAXIMUM POWER DISSIPATION (W)
Parameter
Supply Voltage (+VS to –VS)
Internal Power Dissipation1
SOIC Package (R)
SOT-23-5 Package (RT)
MSOP Package (RM)
Input Voltage (Common Mode)
Differential Input Voltage
Output Short-Circuit Duration
AD8057/AD8058
Data Sheet
TYPICAL PERFORMANCE CHARACTERISTICS
0
4.5
(+) OUTPUT
VOLTAGE
4.0
–1.0
–2.5V SWING RL = 150Ω
–1.5
ABS (–)
OUTPUT
VOLTS (V)
2.5
2.0
–2.0
–2.5
–3.0
1.5
–3.5
1.0
–4.0
0.5
–5V SWING RL = 150Ω
–4.5
10
100
10k
1k
LOAD RESISTANCE (Ω)
100k
–5.0
–40 –30 –20 –10
01064-006
0
Figure 6. Output Swing vs. Load Resistance
0
10 20 30 40
TEMPERATURE (°C)
50
60
70
80 85
01064-009
OUTPUT VOLTAGE (V)
3.5
3.0
–1.5V SWING RL = 150Ω
–0.5
Figure 9. Negative Output Voltage Swing vs. Temperature
–3.0
6
–3.5
4
–4.0
2
–5.0
–ISUPPLY @ ±1.5V
VOS (mV)
–ISUPPLY (mA)
–4.5
–5.5
–6.0
–ISUPPLY @ ±5V
VOS @ ±1.5V
0
VOS @ ±5V
–2
–6.5
–7.0
–4
0
10 20 30 40
TEMPERATURE (°C)
50
60
70
80 85
–6
–40 –30 –20 –10
01064-007
–8.0
–40 –30 –20 –10
Figure 7. −ISUPPLY vs. Temperature
10 20 30 40
TEMPERATURE (°C)
50
60
70
80 85
Figure 10. VOS vs. Temperature
5.0
4.5
0
01064-010
–7.5
3.5
+5V SWING RL = 150Ω
3.0
AVOL @ ±5V
4.0
2.5
AVOL (mV/V)
3.0
2.5
2.0
1.5
1.0
2.0
AVOL @ ±2.5V
1.5
+2.5V SWING RL = 150Ω
1.0
+1.5V SWING RL = 150Ω
0.5
0
–40 –30 –20 –10
0
10 20 30 40
TEMPERATURE (°C)
50
60
70
80 85
0
–40 –30 –20 –10
0
10 20 30 40
TEMPERATURE (°C)
50
60
Figure 11. Open-Loop Gain vs. Temperature
Figure 8. Positive Output Voltage Swing vs. Temperature
Rev. D | Page 6 of 16
70
80 85
01064-011
0.5
01064-008
VOLTS (V)
3.5
Data Sheet
AD8057/AD8058
0
100mV
–0.1
–0.2
20mV/DIV
IB (µA)
–0.3
–0.4
+IB @ ±5V
–0.7
–IB @ ±2.5V
–IB @ ±5V
+IB @ ±1.5V
–IB @ ±1.5V
–0.8
–40 –30 –20 –10
0
10 20 30 40
TEMPERATURE (°C)
50
60
70
80 85
01064-016
–0.6
+IB @ ±2.5V
–100mV
01064-012
–0.5
4ns/DIV
Figure 15. Small Signal Step Response G = +1, RL = 1 kΩ, VS = ±5 V,
See Figure 41 for Test Circuit
Figure 12. Input Bias Current vs. Temperature
4
5V
3
PSRR (mV/V)
PSRR @ ±1.5V ±5V
1V/DIV
2
0
10 20 30 40
TEMPERATURE (°C)
50
60
70
80 85
–5V
01064-013
0
–40 –30 –20 –10
4ns/DIV
01064-017
1
Figure 16. Large Signal Step Response G = +1,RL = 1 kΩ, VS = ±5.0 V,
See Figure 41 for Test Circuit
Figure 13. PSRR vs. Temperature
100mV
0
–10
20mV/DIV
–PSRR VS = ±2.5V
0V
–30
+PSRR VS = ±2.5V
–40
–60
0.1
1
10
FREQUENCY (MHz)
100
1000
–100mV
4ns/DIV
Figure 14. PSRR vs. Frequency
Figure 17. Small Signal Step Response G = –1, RL = 1 kΩ,
See Figure 42 for Test Circuit
Rev. D | Page 7 of 16
01064-019
–50
01064-014
PSRR (dB)
–20
AD8057/AD8058
Data Sheet
5
5V
4
3
2
GAIN (dB)
1V/DIV
1
G = –2
G = –1
0
–1
–2
G = –5
–3
01064-020
–5V
4ns/DIV
–5
1
Figure 21. Large Signal Frequency Response
5
0.5
4
0.4
3
0.3
2
0.2
1
0.1
GAIN (dB)
GAIN (dB)
Figure 18. Large Signal Step Response G = –1, RL = 1 kΩ ,
See Figure 42 for Test Circuit
G = +1
0
1000
10
100
FREQUENCY (MHz)
01064-023
G = –10
–4
–1
VOUT = 0.2V
G = +2
RL = 1.0kΩ
RF = 1.0kΩ
0
–0.1
G = +5
–2
–0.2
G = +2
–3
–0.3
G = +10
–4
100
10
FREQUENCY (MHz)
1000
–0.5
1
Figure 19. Small Signal Frequency Response, VOUT = 0.2 V p-p
10
100
FREQUENCY (MHz)
1000
01064-024
1
01064-021
–5
–0.4
Figure 22. 0.1 dB Flatness G = +2
5
–50
4
–60
3
DISTORTION (dBc)
1
G = +1
0
G = +5
–1
–2
–3
SECOND
–80
THIRD
–90
–100
1
100
10
FREQUENCY (MHz)
1000
–110
Figure 20. Large Signal Frequency Response, VOUT = 2 V p-p
1
10
100
FREQUENCY (MHz)
Figure 23. Distortion vs. Frequency, RL = 150 Ω
Rev. D | Page 8 of 16
1000
01064-025
G = +10
–4
–5
THD
–70
G = +2
01064-022
GAIN (dB)
2
Data Sheet
AD8057/AD8058
–40
VOUT = –1V TO + 1V OR +1V TO –1V
G = +2
RL = 100Ω/1kΩ
0.4%
0.3%
DISTORTION (dBc)
–50
0.2%
20MHz
0.1%
0%
–60
–0.1%
–0.2%
5MHz
–70
–0.3%
0
0.4
0.8
1.2
2.0
2.4
1.6
VOUT (V p-p)
3.2
2.8
3.6
4.0
0
01064-026
–80
Figure 24. Distortion vs. VOUT @ 20 MHz, 5 MHz, RL = 150 Ω, VS = ±5.0 V
10
20
30
40
50
TIME (ns)
4.5
2.5V
3.5
VS = ±2.5V
RL = 1kΩ
G = +1
INPUT SIGNAL
OUTPUT RESPONSE
500mV/
DIV
3.0
2.5
2.0
0V
FALL TIME
1.5
RISE TIME
1.0
0
1
2
VOUT (V p-p)
3
4
20ns/DIV
01064-027
0
Figure 28. Input Overload Recovery, VS = ±2.5 V
Figure 25. Rise Time and Fall Time vs. VOUT, G = +1, RL = 1 kΩ, RF = 0 Ω
5
VS = ±5.0V
RL = 1kΩ
G = +1
4
INPUT SIGNAL 5V
5.0V
1V/DIV
3
OUTPUT SIGNAL = 4.0V
RISE TIME
2
FALL TIME
0V
1
0
0
1
2
VOUT (V p-p)
3
4
01064-028
RISE TIME AND FALL TIME (ns)
01064-030
0.5
20ns/DIV
Figure 26. Rise Time and Fall Time vs. VOUT, G = +2, RL = 100 Ω, RF = 402 Ω
Rev. D | Page 9 of 16
Figure 29. Output Overload Recovery, VS = ±5.0 V
01064-031
RISE TIME AND FALL TIME (ns)
60
Figure 27. Settling Time
5.0
4.0
01064-029
–0.4%
AD8057/AD8058
Data Sheet
0
0
–10
–20
CROSSTALK (dB)
CMRR (dB)
–20
–30
–40
–40
–60
SIDE B DRIVEN
–80
–50
SIDE A DRIVEN
1
10
FREQUENCY (MHz)
100
–120
0.1
01064-032
–70
0.1
Figure 30. CMRR vs. Frequency
10
FREQUENCY (MHz)
100
Figure 33. Crosstalk (Output-to-Output) vs. Frequency
1.8V
OUTPUT SIGNAL 1.7V
1
01064-035
–100
–60
0.015
VS = ±2.5V
R1 = 1kΩ
G = +4
DIFFERENTIAL GAIN (%)
0.010
VS = ±5.0V
RL = 150Ω
0.005
0
–0.005
200mV/
DIV
–0.010
–0.015
INPUT SIGNAL = 0.6V
DIFFERENTIAL PHASE (Degrees)
20ns/DIV
VS = ± 5.0V
RL = 150Ω
1st
Figure 31. Output Overload Recovery, VS = ±2.5 V
0.015
2nd 3rd
4th
5th
6th
7th
VS = ±5.0V
RL = 1kΩ
0.005
VS = ±5V
R1 = 1kΩ
G = +4
9th 10th 11th
DIFFERENTIAL GAIN (%)
0.010
4.5V
8th
01064-036
01064-033
0.14
0.12
0.10
0.08
0.06
0.04
0.02
0
–0.02
0
–0.005
–0.010
–0.015
500mV/
DIV
DIFFERENTIAL PHASE (Degrees)
0.14
0.12
0.10
0.08
0.06
0.04
0.02
0
–0.02
Figure 32. Output Overload Recovery, VS = ±5.0 V
2nd 3rd
4th
5th
6th
7th
8th
9th 10th 11th
01064-037
1st
01064-034
20ns/DIV
VS = ±5.0V
RL = 1kΩ
Figure 34. Differential Gain and Differential Phase One Back Terminated
Load (150 Ω) (Video Op Amps Only)
Rev. D | Page 10 of 16
Data Sheet
AD8057/AD8058
100
135
60
90
40
45
GAIN
20
0
0
VNOISE (nV/√Hz)
PHASE (Degrees)
80
10
1
0.1
1
10
FREQUENCY (MHz)
100
–90
1000
0.1
10
01064-038
–20
0.01
Figure 35. Open-Loop Gain and Phase vs. Frequency
0.01
100
1k
10k
100k
FREQUENCY (Hz)
1M
10M
100M
10M
100M
01064-041
–45
Figure 38. Voltage Noise vs. Frequency
DIFFERENTIAL GAIN (%)
100
VS = +5V
RL = 150Ω
0
–0.01
–0.02
INOISE (pA/√Hz)
–0.03
–0.04
–0.05
DIFFERENTIAL PHASE (Degrees)
0.14
0.12
0.10
0.08
0.06
0.04
0.02
0
–0.02
10
1
2nd 3rd
4th
5th
6th
7th
8th
9th 10th 11th
01064-039
1st
0.1
10
Figure 36. Differential Gain and Differential Phase, RL = 150 Ω
0.01
100
1k
10k
100k
FREQUENCY (Hz)
1M
01064-042
VS = +5V
RL = 150Ω
Figure 39. Current Noise vs. Frequency
DIFFERENTIAL GAIN (%)
100
VS = +5V
RL = 1kΩ
0
–0.01
–0.02
–0.03
10
ZOUT (Ω)
–0.04
–0.05
DIFFERENTIAL PHASE (Degrees)
1
VS = +5V
RL = 1kΩ
1st
2nd 3rd
4th
5th
6th
7th
8th
9th 10th 11th
0.1
0.1
Figure 37. Differential Gain and Differential Phase, RL = 1 kΩ
1
10
FREQUENCY (MHz)
100
Figure 40. Output Impedance vs. Frequency
Rev. D | Page 11 of 16
1000
01064-043
0.14
0.12
0.10
0.08
0.06
0.04
0.02
0
–0.02
01064-040
OPEN-LOOP GAIN (dB)
180
AD8057/AD8058
Data Sheet
TEST CIRCUITS
1kΩ
+VS 4.7µF
+VS 4.7µF
0.01µF
AD8057
AD8058
HP8130A
PULSE
GENERATOR
TR/TF = 1ns
VOUT
0.001µF
1kΩ
0.001µF
VIN 1kΩ
50Ω
AD8057
AD8058
0.01µF
1kΩ
0.01µF
4.7µF
–VS
VOUT
0.001µF
4.7µF
–VS
Figure 42. Test Circuit, G = −1, RL = 1 kΩ
Figure 41. Test Circuit, G = +1, RL = 1 kΩ
Rev. D | Page 12 of 16
01064-018
VIN
50Ω
0.01µF
0.001µF
01064-015
HP8130A
PULSE
GENERATOR
TR/TF = 1ns
Data Sheet
AD8057/AD8058
APPLICATIONS INFORMATION
DRIVING CAPACITIVE LOADS
When driving a capacitive load, most op amps exhibit overshoot in
their pulse response. Figure 43 shows the relationship between
the capacitive load that results in 30% overshoot and the closedloop gain of an AD8058. It can be seen that, under the gain = +2
condition, the device is stable with capacitive loads of up to 69 pF.
In general, to minimize peaking or to ensure device stability for
larger values of capacitive loads, a small series resistor (RS) can
be added between the op amp output and the load capacitor
(CL) as shown in Figure 44.
Table 4. Recommended Value for Resistors RS, RF, RG vs.
Capacitive Load, CL, Which Results in 30% Overshoot
Gain
1
2
3
4
5
10
RF
100 Ω
100 Ω
100 Ω
100 Ω
100 Ω
100 Ω
RG
CL (RS = 0 Ω)
11 pF
51 pF
104 pF
186 pF
245 pF
870 pF
100 Ω
50 Ω
33.2 Ω
25 Ω
11 Ω
CL (RS = 2.4 Ω)
13 pF
69 pF
153 pF
270 pF
500 pF
1580 pF
+OVERSHOOT
29.0%
For the setup shown in Figure 44, the relationship between RS
and CL was empirically derived and is shown in Table 4.
200mV
500
100mV
400
300
–200mV
200
RS = 2.4Ω
50ns/DIV
Figure 45. Typical Pulse Response with CL = 65 pF, Gain = +2, and VS = ±2.5
100
RS = 0Ω
2
3
CLOSED-LOOP GAIN
4
5
01064-044
VIDEO FILTER
0
1
01064-046
100mV/DIV
Figure 43. Capacitive Load Drive vs. Closed-Loop Gain
RF
+2.5V
0.1µF
10µF
RG
RS
AD8058
VIN = 200mV p-p
Figure 46 shows a circuit that uses an AD8057 to create a single
5 V supply, 3-pole Sallen-Key filter. This circuit uses a single RC
pole in front of a standard 2-pole active section. To shift the dc
operating point to midsupply, ac coupling is provided by R4, R5,
and C4.
FET PROBE
VOUT
CL
10µF
–2.5V
C2
680pF
01064-045
0.1µF
Some composite video signals that are derived from a digital
source contain some clock feedthrough that can cause problems
with downstream circuitry. This clock feedthrough is usually at
27 MHz, which is a standard clock frequency for both NTSC
and PAL video systems. A filter that passes the video band and
rejects frequencies at 27 MHz can be used to remove these frequencies from the video signal.
RF
1kΩ
Figure 44. Capacitive Load Drive Circuit
+5V
+5V
2
R1
200Ω
R2
499Ω
C1
100pF
R3
49.9Ω
C4
0.1µF
C3
36pF
R4
10kΩ
R5
10kΩ
3
0.1µF
7
AD8057
4
Figure 46. Low-Pass Filter for Video
Rev. D | Page 13 of 16
+
10µF
6
01064-047
CL (pF)
–100mV
AD8057/AD8058
Data Sheet
1kΩ
Figure 47 shows a frequency sweep of this filter. The response is
down 3 dB at 5.7 MHz; therefore, it passes the video band with
little attenuation. The rejection at 27 MHz is 42 dB, which
provides more than a factor of 100 in suppression of the clock
components at this frequency.
+5V
0.1µF
1kΩ
VIN
0V
10
0.1µF
1kΩ
3
2
+2.5V
+
10µF
+5V
+
10µF
8
50Ω
1
AD8058
REF
VINA
1kΩ
0
1kΩ
1kΩ
6
1kΩ
5
–20
–30
AD8058
AD9225
VINB
4
–40
0.1µF
–50
50Ω
7
–5V
10µF
+
1kΩ
01064-049
LOG MAGNITUDE (dB)
–10
–60
Figure 48. Schematic Circuit for Driving AD9225
–70
In this circuit, one of the op amps is configured in the inverting
mode whereas the other is in the noninverting mode. However,
to provide better bandwidth matching, each op amp is configured
for a noise gain of +2. The inverting op amp is configured for a
gain of −1 and the noninverting op amp is configured for a gain
of +2. Each of these produces a noise gain of +2, which is determined only by the inverse of the feedback ratio. The input signal to
the noninverting op amp is divided by two to normalize its level
and make it equal to the inverting output.
For 0 V input, the outputs of the op amps want to be at 2.5 V,
which is the midsupply level of the ADCs. This is accomplished by
first taking the 2.5 V reference output of the ADC and dividing it
by two by a pair of 1 kΩ resistors. The resulting 1.25 V is applied to
the positive input of each op amp. This voltage is then multiplied by
the gain of +2 of the op amps to provide a 2.5 V level at each output.
The assumption for this circuit is that the input signal is bipolar
with respect to ground and the circuit must be dc-coupled thereby
implying the existence of a negative supply elsewhere in the system.
This circuit uses −5 V as the negative supply for the AD8058.
Tying the negative supply of the AD8058 to ground causes a
problem at the input of the noninverting op amp. The input
common-mode voltage can only go to within 1 V of the negative
rail. Because this circuit requires that the positive inputs operate
with a 1.25 V bias, there is not enough room to swing this voltage
in the negative direction. The inverting stage does not have this
problem because its common-mode input voltage remains fixed
at 1.25 V. If dc coupling is not required, various ac coupling
techniques can be used to eliminate this problem.
–90
100k
1M
10M
FREQUENCY (MHz)
100M
01064-048
–80
Figure 47. Video Filter Response
DIFFERENTIAL ANALOG-TO-DIGITAL DRIVER
As system supply voltages are dropping, many ADCs provide
differential analog inputs to increase the dynamic range of the
input signal while still operating on a low supply voltage.
Differential driving can also reduce second and other evenorder distortion products.
Analog Devices, Inc., offers an assortment of 12- and 14-bit
high speed converters that have differential inputs and can be
run from a single 5 V supply. These include the AD9220, AD9221,
AD9223, AD9224, and AD9225 at 12 bits, and the AD9240,
AD9241, and AD9243 at 14 bits. Although these devices can
operate over a range of common-mode voltages at their analog
inputs, they work best when the common-mode voltage at the
input is at the midsupply or 2.5 V.
Op amp architectures that require upwards of 2 V of headroom
at the output have significant problems when trying to drive
such ADCs while operating with a 5 V positive supply. The low
headroom output design of the AD8057 and AD8058 make
them ideal for driving these types of ADCs.
The AD8058 can be used to make a dc-coupled, single-endedto-differential driver for one of these ADCs. Figure 48 is a
schematic of such a circuit for driving an AD9225, 12-bit, 25
MSPS ADC.
LAYOUT
The AD8057 and AD8058 are high speed op amps for use in a
board layout that follows standard high speed design rules. Make
all signal traces as short and direct as possible. In particular, keep
the parasitic capacitance on the inverting input of each device
to a minimum to avoid excessive peaking and other undesirable
performance. Bypass the power supplies very close to the power pins
of the package with a 0.1 µF capacitor in parallel with a larger
(approximately 10 µF) tantalum capacitor. Connect these capacitors
to a ground plane that either is on an inner layer or fills the area
of the board that is not used for other signals.
Rev. D | Page 14 of 16
Data Sheet
AD8057/AD8058
OUTLINE DIMENSIONS
3.20
3.00
2.80
5.15
4.90
4.65
5
8
3.20
3.00
2.80
1
4
PIN 1
IDENTIFIER
0.65 BSC
0.95
0.85
0.75
15° MAX
1.10 MAX
6°
0°
0.40
0.25
0.80
0.55
0.40
0.23
0.09
10-07-2009-B
0.15
0.05
COPLANARITY
0.10
COMPLIANT TO JEDEC STANDARDS MO-187-AA
Figure 49. 8-Lead Mini Small Outline Package [MSOP]
(RM-8)
Dimensions shown in millimeters
5.00 (0.1968)
4.80 (0.1890)
1
5
4
1.27 (0.0500)
BSC
0.25 (0.0098)
0.10 (0.0040)
COPLANARITY
0.10
SEATING
PLANE
6.20 (0.2441)
5.80 (0.2284)
1.75 (0.0688)
1.35 (0.0532)
0.51 (0.0201)
0.31 (0.0122)
0.50 (0.0196)
0.25 (0.0099)
45°
8°
0°
0.25 (0.0098)
0.17 (0.0067)
1.27 (0.0500)
0.40 (0.0157)
COMPLIANT TO JEDEC STANDARDS MS-012-AA
CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN.
Figure 50. 8-Lead Standard Small Outline Package [SOIC_N]
Narrow Body (R-8)
Dimensions shown in millimeters and (inches)
Rev. D | Page 15 of 16
012407-A
8
4.00 (0.1574)
3.80 (0.1497)
AD8057/AD8058
Data Sheet
3.00
2.90
2.80
1.70
1.60
1.50
5
1
4
2
3.00
2.80
2.60
3
0.95 BSC
1.90
BSC
1.45 MAX
0.95 MIN
0.15 MAX
0.05 MIN
0.50 MAX
0.35 MIN
0.20 MAX
0.08 MIN
SEATING
PLANE
10°
5°
0°
0.60
BSC
0.55
0.45
0.35
COMPLIANT TO JEDEC STANDARDS MO-178-AA
11-01-2010-A
1.30
1.15
0.90
Figure 51. 5-Lead Small Outline Transistor Package [SOT-23]
(RJ-5)
Dimensions shown in millimeters
ORDERING GUIDE
Model 1
AD8057AR
AD8057AR-REEL
AD8057AR-REEL7
AD8057ARZ
AD8057ARZ-REEL
AD8057ARZ-REEL7
AD8057ACHIPS
AD8057ART-R2
AD8057ART-REEL7
AD8057ARTZ-R2
AD8057ARTZ-REEL
AD8057ARTZ-REEL7
AD8057AR-EBZ
AD8057ART-EBZ
AD8058AR
AD8058AR-REEL7
AD8058ARZ
AD8058ARZ-REEL
AD8058ARZ-REEL7
AD8058ACHIPS
AD8058ARM
AD8058ARM-REEL7
AD8058ARMZ-REEL7
AD8058ARMZ
AD8058ARMZ-REEL
AD8058AR-EBZ
AD8058ARM-EBZ
1
2
Notes
2
2
2
Temperature
Range
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
−40°C to +85°C
Package Description
8-Lead SOIC_N
8-Lead SOIC_N, 13” Tape and Reel
8-Lead SOIC_N, 7” Tape and Reel
8-Lead SOIC_N
8-Lead SOIC_N, 13” Tape and Reel
8-Lead SOIC_N, 7” Tape and Reel
Die
5-Lead SOT-23
5-Lead SOT-23
5-Lead SOT-23
5-Lead SOT-23
5-Lead SOT-23
8-Lead SOIC_N Evaluation Board
5-Lead SOT-23 Evaluation Board
8-Lead SOIC_N
8-Lead SOIC_N, 7” Tape and Reel
8-Lead SOIC_N
8-Lead SOIC_N, 13” Tape and Reel
8-Lead SOIC_N, 7” Tape and Reel
Die
8-Lead MSOP
8-Lead MSOP
8-Lead MSOP
8-Lead MSOP
8-Lead MSOP
8-Lead SOIC_N Evaluation Board
8-Lead MSOP Evaluation Board
Z = RoHS Compliant Part.
Bottom mark has # sign before date code
©2010–2013 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D01064-0-9/13(D)
Rev. D | Page 16 of 16
Package
Option
R-8
R-8
R-8
R-8
R-8
R-8
Waffle Pak
RJ-5
RJ-5
RJ-5
RJ-5
RJ-5
R-8
R-8
R-8
R-8
R-8
Waffle Pak
RM-8
RM-8
RM-8
RM-8
RM-8
Branding
H7A
H7A
H08
H08
H08
H8A
H8A
H8A
H8A
H8A
Similar pages