LITEON LTA-1000E Led display Datasheet

LED Display
Product Data Sheet
LTA-1000E
Spec No.: DS-30-92-0808
Effective Date: 10/15/2000
Revision: -
LITE-ON DCC
RELEASE
BNS-OD-FC001/A4
LITE-ON Technology Corp. / Optoelectronics
No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C.
Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660
http://www.liteon.com/opto
LITE-ON ELECTRONICS, INC.
Property of Lite-On Only
FEATURES
*RECTANGULAR LIGHT BAR.
*LARGE, BRIGHT, UNIFORM LIGHT EMITTING AREAS.
*LOW POWER REQUIREMENT.
*HIGH BRIGHTNESS & HIGH CONTRAST.
*SOLID STATE RELIABILITY.
*CATEGORIZED FOR LUMINOUS INTENSITY.
DESCRIPTION
The LTA-1000E is a ten rectangular light sources array display
designed for a variety of applications where a continuously large,
bright source of light is required. This device utilizes red orange
LED chips, which are made from GaAsP on a transparent GaP
substrate, and has a gray face and white segments.
DEVICE
PART NO.
DESCRIPTION
Red Orange
Universal
Ten Rectangular Bar
LTA-1000E
PART NO.: LTA-1000E
BNS-OD-C131/A4
PAGE:
1 of 5
LITE-ON ELECTRONICS, INC.
Property of Lite-On Only
PACKAGE DIMENSIONS
NOTES: All dimensions are in millimeters. Tolerances are 0.25 mm (0.01“) unless otherwise noted.
INTERNAL CIRCUIT DIAGRAM
PART NO.: LTA-1000E
BNS-OD-C131/A4
PAGE:
2 of 5
LITE-ON ELECTRONICS, INC.
Property of Lite-On Only
PIN CONNECTION
PART NO.: LTA-1000E
BNS-OD-C131/A4
No.
CONNECTION
1
ANODE A
2
ANODE B
3
ANODE C
4
ANODE D
5
ANODE E
6
ANODE F
7
ANODE G
8
ANODE H
9
ANODE J
10
ANODE K
11
CATHODE K
12
CATHODE J
13
CATHODE H
14
CATHODE
15
CATHODE F
16
CATHODE E
17
CATHODE D
18
CATHODE C
19
CATHODE B
20
CATHODE A
G
PAGE:
3 of 5
LITE-ON ELECTRONICS, INC.
Property of Lite-On Only
ABSOLUTE MAXIMUM RATING AT Ta=25oC
PARAMETER
MAXIMUM RATING
UNIT
Power Dissipation Per Segment
75
mW
Peak Forward Current Per Segment
( 1/10 Duty Cycle, 0.1ms Pulse Width )
100
mA
Continuous Forward Current Per Segment
Derating Linear From 25℃ Per Segment
25
0.33
mA
mA/℃
Reverse Voltage Per Segment
5
-35℃ to +85℃
Operating Temperature Range
V
-35℃ to +85℃
Storage Temperature Range
Solder Temperature: max 260℃ for max 3sec at 1.6mm below seating plane.
ELECTRICAL / OPTICAL CHARACTERISTICS AT Ta=25oC
PARAMETER
SYMBOL MIN. TYP. MAX. UNIT TEST CONDITION
2000
cd
IF=10mA
p
630
nm
IF=20mA
Spectral Line Half-Width

40
nm
IF=20mA
Dominant Wavelength
d
621
nm
IF=20mA
Forward Voltage Per Segment
VF
2
2.6
V
IF=20mA
Reverse Current Per Segment
IR
100
A
VR=5V
IV-m
2:1
Average Luminous Intensity
IV
Peak Emission Wavelength
Luminous Intensity Matching Ratio
540
IF=10mA
Note: Luminous intensity is measured with a light sensor and filter combination that
approximates the CIE (Commision Internationale De L’Eclairage) eye-response curve.
PART NO.: LTA-1000E
BNS-OD-C131/A4
PAGE:
4 of 5
LITE-ON ELECTRONICS, INC.
Property of Lite-On Only
TYPICAL ELECTRICAL / OPTICAL CHARACTERISTIC CURVES
(25oC Ambient Temperature Unless Otherwise Noted)
PART NO.: LTA-1000E
BNS-OD-C131/A4
PAGE:
5 of 5
Similar pages