480W Constant Voltage + Constant Current LED Driver HVG-480 IP65 IP67 ■ Features Wide input range 180 ~ 528VAC Constant Voltage + Constant Current mode output Metal housing with ClassⅠdesign Built-in active PFC function IP67 / IP65 rating for indoor or outdoor installations Function options: output adjustable via potentiometer; series Type HL ■ Applications LED greenhouse lighting LED statium lighting LED mining lighting Type HL for use in Class I, Division 2 hazardous (Classified) location 3 in 1 dimming (dim-to-off) ; Smart timer dimming Typical lifetime>50000 hours 5 years warranty ■ Description HVG-480 series is a 480W AC/DC LED driver featuring the dual mode constant voltage and constant current output. HVG-480 operates from 180~528VAC and offers models with different rated voltage ranging between 24V and 54V. Thanks to the high efficiency up to 95%, with the fanless design, the entire series is able to operate for -40℃~+85℃ case temperature under free air convection. The design of metal housing and IP67/IP65 ingress protection level allows this series to fit both indoor and outdoor applications. HVG-480 is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for LED lighting system. ■ Model Encoding HVG - 480 - 24 A Function options Rated output voltage(24/30/36/42/48/54V) Rated wattage Series name Type A B Dx D2 IP Level IP65 IP67 IP67 IP67 Function Io and Vo adjustable through built-in potentiometer. 3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistance) Built-in Smart timer dimming function by user request. Built-in Smart timer dimming and programmable function. Note In Stock In Stock By request In Stock File Name:HVG-480-SPEC 2017-04-21 480W Constant Voltage + Constant Current LED Driver HVG-480 series SPECIFICATION MODEL DC VOLTAGE HVG-480-24 HVG-480-30 HVG-480-36 HVG-480-42 HVG-480-48 HVG-480-54 24V 30V 36V 42V 48V 54V 18 ~ 36V 21 ~ 42V 24 ~ 48V 27 ~ 54V 13.3A 11.4A 10A 8.9A 478.8W 478.8W 480W 480.6W 250mVp-p 250mVp-p 350mVp-p 35.7 ~ 44.1V 40.8 ~ 50.4V 45.9 ~ 56.7V CONSTANT CURRENT REGION Note.4 12 ~ 24V OUTPUT RATED CURRENT 20A 15 ~ 30V 16A RATED POWER 480W 480W 250mVp-p 200mVp-p RIPPLE & NOISE (max.) Note.2 200mVp-p Adjustable for A-Type only (via built-in potentiometer) VOLTAGE ADJ. RANGE 20.4 ~ 25.2V 25.5 ~ 31.5V 30.6 ~ 37.8V Adjustable for A-Type only (via built-in potentiometer) CURRENT ADJ. RANGE 6.6 ~ 13.3A 10 ~ 20A 8 ~ 16A ±1.0% VOLTAGE TOLERANCE Note.3 ±1.0% ±1.0% ±0.5% LINE REGULATION ±0.5% ±0.5% ±0.5% LOAD REGULATION SETUP, RISE TIME INPUT Note.5 ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% 95% 95% 51.5 ~ 58V 58 ~ 65V 180 ~ 528VAC 254VDC ~ 747VDC (Please refer to "STATIC CHARACTERISTIC" section) 47 ~ 63Hz POWER FACTOR (Typ.) PF≧0.98/230VAC, PF≧0.98/277VAC, PF≧0.97/347VAC, PF≧0.95/480VAC @ full load (Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section) TOTAL HARMONIC DISTORTION THD< 20% (@ load≧50% at 230VAC/277VAC/347VAC/480VAC input Please refer to “TOTAL HARMONIC DISTORTION (THD)” section MAX. NO. of PSUs on 16A CIRCUIT BREAKER LEAKAGE CURRENT OVER CURRENT SHORT CIRCUIT OVER VOLTAGE OVER TEMPERATURE WORKING TEMP. MAX. CASE TEMP. ENVIRONMENT WORKING HUMIDITY STORAGE TEMP., HUMIDITY EMC ±0.5% FREQUENCY RANGE AC CURRENT (Typ.) INRUSH CURRENT(Typ.) SAFETY & 4.4 ~ 8.9A ±1.0% 16ms / 347VAC, 480VAC EFFICIENCY (Typ.) PROTECTION 5 ~ 10A ±1.0% Note.6 500ms, 100ms / 230VAC, 347VAC, 480VAC HOLD UP TIME (Typ.) VOLTAGE RANGE ±0.5% ±0.5% 5.7 ~ 11.4A ±1.0% 94% 95% 94.5% 94% 1.52A / 347VAC 1.15A / 480VAC COLD START 40A(twidth=1100μs measured at 50% Ipeak) at 480VAC ; Per NEMA 410 4unit(circuit breaker of type B) / 6units(circuit breaker of type C) at 480VAC <0.75mA / 480VAC 95 ~ 108% Constant current limiting, recovers automatically after fault condition is removed Constant current limiting, recovers automatically after fault condition is removed 46 ~ 50V 32.5 ~ 36.5V 26 ~ 30V 39.5 ~ 45V Shut down output voltage, re-power on to recovery Shut down output voltage, re-power on to recovery Tcase=-40 ~ +85℃(Please refer to "OUTPUT LOAD vs TEMPERATURE" section) Tcase=+85℃ 20 ~ 95% RH non-condensing -40 ~ +80℃, 10 ~ 95% RH non-condensing TEMP. COEFFICIENT ±0.03%/℃ (0 ~ 60℃) VIBRATION 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes SAFETY STANDARDS UL8750 (type”HL”), CSA C22.2 No. 250.13-12, IP65 or IP67 approved WITHSTAND VOLTAGE I/P-O/P:3.75KVAC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH Compliance to FCC Part 15 Subpart B EMC EMISSION I/P-FG:2KVAC O/P-FG:1.5KVAC Immunity Line-Earth 4KV, Line-Line 2KV 318.9K hrs min. Telcordia SR-332(Bellcore) ; 84.5K hrs min. MIL-HDBK-217F (25℃) 262*125*43.8mm (L*W*H) DIMENSION 2.8Kg;4pcs/12.2Kg/0.58CUFT PACKING 1. All parameters NOT specially mentioned are measured at 347VAC input, rated load and 25℃ of ambient temperature. EMC IMMUNITY MTBF OTHERS NOTE 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Please refer to "DRIVING METHODS OF LED MODULE". 5. De-rating may be needed under low input voltages. Please refer to STATIC CHARACTERISTIC sections for details. 6. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time. 7. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. 8. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 80℃ or less. 9. Please refer to the warranty statement on MEAN WELL's website at http://www.meanwell.com File Name:HVG-480-SPEC 2017-04-21 480W Constant Voltage + Constant Current LED Driver HVG-480 series BLOCK DIAGRAM PFC fosc : 45KHz PWM fosc : 55KHz EMI FILTER & RECTIFIERS I/P POWER SWITCHING PFC CIRCUIT RECTIFIERS & FILTER +V -V DIM+ DIM(B Type) O.L.P. FG O.L.P. PFC CONTROL PWM CONTROL DETECTION CIRCUIT O.V.P. O.T.P. DRIVING METHODS OF LED MODULE ※ This series is able to work in either Constant Current mode (a direct drive way) or Constant Voltage mode (usually through additional DC/DC driver) to drive the LEDs. In the constant current region, the highest voltage at the output of the driver depends on the configuration of the end systems. Vo(%) 100 (B) Constant Current area (A) Constant Voltage area Should there be any compatibility issues, please contact MEAN WELL. 50 50 100 Io (%) Typical LED power supply I-V curve File Name:HVG-480-SPEC 2017-04-21 480W Constant Voltage + Constant Current LED Driver HVG-480 series DIMMING OPERATION Vo+(Red) Vo-(Black) DIM+(Blue)* DIM-(White)** HVG-480 FG (Green/Yellow) AC/L(Brown) AC/N(Blue) * DIM+ for B-Type PROG+ for D2-Type * *DIM- for B-Type PROG- for D2-Type ※ 3 in 1 dimming function (for B-Type) Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-: 0 ~ 10VDC, or 10V PWM signal or resistance. Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers. Dimming source current from power supply: 1 0 0μA (typ.) 100% ◎ Applying additive 0 ~ 10VDC 90% -V + + - - DIM+ + Output current (%) 80% +V 70% 60% 50% 40% 30% Additive Voltage - 20% DIM- 10% “DO NOT connect "DIM- to -V" 0% 0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V Dimming input: Additive voltage ◎ Applying additive 10V PWM signal (frequency range 100Hz ~ 3KHz): 100% 90% -V + + - - DIM+ Output current (%) 80% +V 70% 60% 50% 40% 30% Additive PWM signal 20% DIM- 10% “DO NOT connect "DIM- to -V" 0% ◎ Applying additive resistance: 100% 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Duty cycle of additive 10V PWM signal dimming input 90% -V 80% + - - DIM+ Additive Resistance Output current (%) +V + 70% 60% 50% 40% 30% DIM“DO NOT connect "DIM- to -V" 20% 10% 0% Short 10K/N 20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N (N=driver quantity for synchronized dimming operation ) Dimming input: Additive resistance Note : 1. Min. dimming level is about 5% and the output current is not defined when 0%< I out<5%. 2. The output current could drop down to 0% when dimming input is about 0kΩ or 0Vdc, or 10V PWM signal with 0% duty cycle. File Name:HVG-480-SPEC 2017-04-21 480W Constant Voltage + Constant Current LED Driver HVG-480 series ※ Smart timer dimming function (for Dxx-Type by User definition) MEAN WELL Smart timer dimming primarily provides the adaptive proportion dimming profile for the output constant current level to perform up to 14 consecutive hours. 3 dimming profiles hereunder are defined accounting for the most frequently seen applications. If other options may be needed, please contact MEAN WELL for details. Ex : ◎ D01-Type: the profile recommended for residential lighting Dimming Level(%) Set up for D01-Type in Smart timer dimming software program: T1 T2 T3 T4 TIME** 06:00 07:00 11:00 --- LEVEL** 100% 70% 50% 70% Operating Time(HH:MM) **: TIME matches Operating Time in the diagram whereas LEVEL matches Dimming Level. Example: If a residential lighting application adopts D01-Type, when turning on the power supply at 6:00pm, for instance: [1] The power supply will switch to the constant current level at 100% starting from 6:00pm. [2] The power supply will switch to the constant current level at 70% in turn, starting from 0:00am, which is 06:00 after the power supply turns on. [3] The power supply will switch to the constant current level at 50% in turn, starting from 1:00am, which is 07:00 after the power supply turns on. [4] The power supply will switch to the constant current level at 70% in turn, starting from 5:00am, which is 11:00 after the power supply turns on. The constant current level remains till 8:00am, which is 14:00 after the power supply turns on. Ex: ◎ D02-Type: the profile recommended for street lighting Dimming Level(%) Set up for D02-Type in Smart timer dimming software program: T1 T2 T3 T4 T5 TIME** 01:00 03:00 8:00 11:00 --- LEVEL** 50% 80% 100% 60% 80% Operating Time(HH:MM) **: TIME matches Operating Time in the diagram whereas LEVEL matches Dimming Level. Example: If a street lighting application adopts D02-Type, when turning on the power supply at 5:00pm, for instance: [1] The power supply will switch to the constant current level at 50% starting from 5:00pm. [2] The power supply will switch to the constant current level at 80% in turn, starting from 6:00pm, which is 01:00 after the power supply turns on. [3] The power supply will switch to the constant current level at 100% in turn, starting from 8:00pm, which is 03:00 after the power supply turns on. [4] The power supply will switch to the constant current level at 60% in turn, starting from 1:00am, which is 08:00 after the power supply turns on. [5] The power supply will switch to the constant current level at 80% in turn, starting from 4:00am, which is 11:00 after the power supply turns on. The constant current level remains till 6:30am, which is 14:00 after the power supply turns on. File Name:HVG-480-SPEC 2017-04-21 480W Constant Voltage + Constant Current LED Driver HVG-480 series Ex: ◎ D03-Type: the profile recommended for tunnel lighting Dimming Level(%) Set up for D03-Type in Smart timer dimming software program: T1 T2 T3 TIME** 01:30 11:00 --- LEVEL** 70% 100% 70% Operating Time(HH:MM) **: TIME matches Operating Time in the diagram whereas LEVEL matches Dimming Level. Example: If a tunnel lighting application adopts D03-Type, when turning on the power supply at 4:30pm, for instance: [1] The power supply will switch to the constant current level at 70% starting from 4:30pm. [2] The power supply will switch to the constant current level at 100% in turn, starting from 6:00pm, which is 01:30 after the power supply turns on. [3] The power supply will switch to the constant current level at 70% in turn, starting from 5:00am, which is 11:00 after the power supply turns on. The constant current level remains till 6:30am, which is 14:00 after the power supply turns on. File Name:HVG-480-SPEC 2017-04-21 HVG-480 480W Constant Voltage + Constant Current LED Driver series OUTPUT LOAD vs TEMPERATURE 100 100 80 80 180VAC 230VAC 60 Above 277VAC LOAD (%) LOAD (%) 60 40 20 -40 -25 -10 0 15 30 50 55 60 65 70 40 20 (HORIZONTAL) -40 -25 0 20 AMBIENT TEMPERATURE,Ta (℃) 45 55 65 75 85 (HORIZONTAL) Tcase (℃) If HVG-480 operates in Constant Current mode with the rated current, the maximum workable Ta is 55℃(Typ. 230VAC) STATIC CHARACTERISTIC POWER FACTOR (PF) CHARACTERISTIC ※ Tcase at 80℃ Constant Current Mode 1.00 100 0.95 90 LOAD (%) 0.90 0.85 70 0.80 PF 80 347VAC 0.70 50 0.65 40 0.60 180 480VAC 0.75 60 277VAC 230VAC 0.55 347 440 480 0.50 528 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% (480W) INPUT VOLTAGE (V) 60Hz LOAD TOTAL HARMONIC DISTORTION (THD) EFFICIENCY vs LOAD HVGC-480 series possess superior working efficiency that up to 95% can be reached in field applications. ※ 54V Model, Tcase at 80℃ ※ 54V Model, Tcase at 80℃ 35 100 THD(%) 25 20 480VAC 15 347VAC 10 277VAC 230VAC 5 EFFICIENCY(%) 30 95 90 480VAC 347VAC 85 277VAC 80 230VAC 75 0 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% LOAD 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% LOAD File Name:HVG-480-SPEC 2017-04-21 480W Constant Voltage + Constant Current LED Driver HVG-480 series LIFE TIME 120 100 LIFETIME(Kh) 80 60 40 20 0 20 30 40 50 60 70 80 Tcase (℃ ) File Name:HVG-480-SPEC 2017-04-21 480W Constant Voltage + Constant Current LED Driver MECHANICAL SPECIFICATION HVG-480 Case No. 251 series Unit:mm ※A-Type 262 235.2 13.4 8.9 tc 58 300±20 STW 18AWG×3C 113.8 Vo Io ADJ. ADJ. 15 FG (Green/Yellow) AC/L(Brown) AC/N(Blue) 78 125 15 ψ4.5×4PL SJTW 14AWG×2C Vo+(Red) Vo-(Black) : Max. Case Temperature 43.8 tc 300±20 ※B/D2-Type 262 235.2 13.4 8.9 15 ψ4.5×4PL STW 18AWG×3C 113.8 SJTW 14AWG×2C 58 300±20 15 FG (Green/Yellow) AC/L(Brown) AC/N(Blue) 78 125 300±20 tc UL2517 22AWG×2C Vo+(Red) Vo-(Black) DIM+(Blue)* DIM-(White)** * DIM+ for B-Type PROG+ for D2-Type * *DIM- for B-Type PROG- for D2-Type : Max. Case Temperature 43.8 tc INSTALLATION MANUAL Please refer to : http://www.meanwell.com/manual.html File Name:HVG-480-SPEC 2017-04-21