1.6X1.25mm BI-COLOR SMD CHIP LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: APTB1612SURKQWDF-AMT Hyper Red White Descriptions z The Hyper Red source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode. z The source color devices are made with InGaN Light Emitting Diode. Features z Electrostatic discharge and power surge could damage the LEDs. z High reliability LED package. z 1.6mmx1.25mm SMD LED, 0.65mm thickness. z Bi-color,low power consumption. z It is recommended to use a wrist band or antielectrostatic glove when handling the LEDs. z All devices, equipments and machineries must be z Wide viewing angle. z Ideal for backlight and indicator. electrically grounded. z Package : 2000pcs / reel. Applications z Moisture sensitivity level : level 3. z Traffic signaling. z RoHS compliant. z Backlighting (illuminated advertising , general lighting). z Interior and exterior automotive lighting. z Substitution of micro incandescent lamps. z Reading lamps. z Signal and symbol luminaire for orientation. z Marker lights (e.g. Steps, exit ways, etc). Package Dimensions z Decorative and entertainment lighting. z Indoor and outdoor commercial and residential architectural lighting. RED WHITE Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3.The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAL3633 APPROVED: Wynec REV NO: V.4A CHECKED: Allen Liu DATE: SEP/01/2015 PAGE: 1 OF 9 DRAWN: M.Liu ERP: 1203012080 Selection Guide Part No. Emitting Color (Material) Iv (mcd) [2] @ 20mA Lens Type Hyper Red (AlGaInP) APTB1612SURKQWDF-AMT Yellow Fluorescent White (InGaN) Viewing Angle [1] Code. Min. Max. N 120 200 P 200 300 Q 300 400 *G *40 *55 *H *55 *80 *M *80 *120 N 120 200 P 200 300 Q 300 400 *N *120 *200 *P *200 *300 *Q *300 *400 2θ1/2 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. * Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25°C Parameter Symbol Value Hyper Red White 75 80 Unit Power dissipation PD Operating Temperature Top -40 To+ 100 °C Storage Temperature Tstg -40 To+ 110 °C Junction temperature TJ 115 115 °C DC Forward Current (TA=25°C) IF 30 20 mA Peak Forward Current [1] (TA=25°C) IFM 185 150 mA Reverse Voltage (TA=25°C) VR 5 5 V 3000 250 V 540 650 560 660 °C/W Electrostatic Discharge Threshold (HBM) Thermal resistance (Junction/ambient) 1 chip on (typ.) 2 chip on (typ.) Rth j-a Rth j-a mW Note: 1.1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAL3633 APPROVED: Wynec REV NO: V.4A CHECKED: Allen Liu DATE: SEP/01/2015 PAGE: 2 OF 9 DRAWN: M.Liu ERP: 1203012080 Electrical / Optical Characteristics at TA=25°C (Red) Parameter Symbol Wavelength at peak emission Dominant Wavelength Spectral bandwidth at 50%Φ Forward Voltage Min. Typ. λ peak IF=20mA λ dom [1] IF=20mA REL MAX Value IF=20mA 645 620 nm 640 Δλ 28 VF [2] 1.95 IF=20mA Unit Max. nm nm 2.5 V 10 uA Reverse Current (VR = 5V) IR Temperature coefficient of λ peak IF=20mA, -10 ° C≤ T≤100 ° C TC λ peak 0.12 nm/ ° C Temperature coefficient of λ dom IF=20mA, -10 ° C≤ T≤100 ° C TC λ dom 0.06 nm/ ° C Temperature coefficient of VF IF=20mA, -10 ° C≤ T≤100 ° C TCV -2.8 mV/ ° C Notes: 1.The dominant Wavelength (λ d) above is the setup value of the sorting machine. (Tolerance λ d : ±1nm. ) 2.Forward Voltage: +/-0.1V. 3.Wavelength value is traceable to the CIE127-2007 compliant national standards. 4.Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Electrical / Optical Characteristics at TA=25°C (White) Parameter Symbol Value Chromaticity coordinate x acc.to CIE1931 [Typ.] IF=20mA x [1] 0.31 Chromaticity coordinate y acc.to CIE1931 [Typ.] IF=20mA y [1] 0.31 Reverse Current (VR = 5V) [Max.] IR 50 Forward Voltage IF=20mA [Min.] Forward Voltage IF=20mA [Typ.] Unit uA VF [2] V 3.3 Forward Voltage IF=20mA [Max.] 4.0 Temperature coefficient of VF IF=20mA, -10 ° C≤ T≤100 ° C [Typ.] TCV -2.0 mV/ ° C Temperature coefficient of x IF=20mA, -10 ° C≤ T≤100 ° C [Typ.] TCX -0.18 10-3/ ° C Temperature coefficient of y IF=20mA, -10 ° C≤ T≤100 ° C [Typ.] TCy -0.20 10-3/ ° C Notes: 1.Measurement tolerance of the chromaticity coordinates is ±0.01. 2.Forward Voltage: +/-0.1V. 3.Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. SPEC NO: DSAL3633 APPROVED: Wynec REV NO: V.4A CHECKED: Allen Liu DATE: SEP/01/2015 PAGE: 3 OF 9 DRAWN: M.Liu ERP: 1203012080 APTB1612SURKQWDF-AMT Hyper Red SPEC NO: DSAL3633 APPROVED: Wynec REV NO: V.4A CHECKED: Allen Liu DATE: SEP/01/2015 PAGE: 4 OF 9 DRAWN: M.Liu ERP: 1203012080 White SPEC NO: DSAL3633 APPROVED: Wynec REV NO: V.4A CHECKED: Allen Liu DATE: SEP/01/2015 PAGE: 5 OF 9 DRAWN: M.Liu ERP: 1203012080 APTB1612SURKQWDF-AMT White CIE 0.40 c0 0.35 y b1 0.30 b2 a0 0.25 a2 0.20 0.20 0.25 0.30 0.35 0.40 x a2 b1 x y x y x y 0.263 0.213 0.282 0.245 0.298 0.271 0.282 0.245 0.298 0.271 0.313 0.296 0.265 0.265 0.286 0.299 0.306 0.332 0.242 0.226 0.265 0.265 0.286 0.299 0.313 0.296 0.329 0.325 0.329 0.325 0.358 0.372 0.329 0.371 0.363 0.400 0.306 0.332 0.329 0.371 a0 c0 b2 Notes: Shipment may contain more than one chromaticity regions. Orders for single chromaticity region are generally not accepted. Measurement tolerance of the chromaticity coordinates is ±0.01. SPEC NO: DSAL3633 APPROVED: Wynec REV NO: V.4A CHECKED: Allen Liu DATE: SEP/01/2015 PAGE: 6 OF 9 DRAWN: M.Liu ERP: 1203012080 APTB1612SURKQWDF-AMT Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Dimensions (Units : mm) SPEC NO: DSAL3633 APPROVED: Wynec Reel Dimension REV NO: V.4A CHECKED: Allen Liu DATE: SEP/01/2015 PAGE: 7 OF 9 DRAWN: M.Liu ERP: 1203012080 PACKING & LABEL SPECIFICATIONS APTB1612SURKQWDF-AMT Terms and conditions for the usage of this document 1. The information included in this document reflects representative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes SPEC NO: DSAL3633 APPROVED: Wynec REV NO: V.4A CHECKED: Allen Liu DATE: SEP/01/2015 PAGE: 8 OF 9 DRAWN: M.Liu ERP: 1203012080 Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below Lot Tolerance Percent Defective (LTPD) : 10% No. Test Item Standards Test Times / Number of Cycles Damaged Test Condition 1 Continuous operating test - Ta =25°C ,IF = maximum rated current* 1,000 h 0 / 22 2 High Temp. operating test EIAJ ED4701/100(101) Ta = 100°C IF =derated current at 100°C 1,000 h 0 / 22 3 Low Temp. operating test - Ta = -40°C, IF = maximum rated current* 1,000 h 0 / 22 4 High temp. storage test EIAJ EDTa = maximum rated storage temperature 4701/100(201) 1,000 h 0 / 22 5 Low temp. storage test EIAJ ED4701/100(202) Ta = -40°C 1,000 h 0 / 22 6 High temp. & humidity storage test EIAJ ED4701/100(103) Ta = 60°C, RH = 90% 1,000 h 0 / 22 7 High temp. & humidity operating test EIAJ ED4701/100(102) Ta = 60°C, RH = 90% IF = derated current at 60°C 1,000 h 0 / 22 8 Resistance to Soldering Heat EIAJ ED4701/100(301) TSld=260±5°C, 10 sec 2 times 0 / 18 9 Thermal shock operating test - Ta = -40°C(15min) ~ 100°C(15min) IF = derated current at 100°C 1,000 cycles 0 / 22 10 Thermal shock test - Ta = -40°C(15min) ~ 100°C(15min) 1,000 cycles 0 / 22 11 Electric Static Discharge (ESD) EIAJ ED4701/100(304) C = 100pF , R2 = 1.5KΩ V=3000V(Red) V = 250V(White) Once each Polarity 0 / 22 12 Vibration test - a = 196m/s² , f = 100~2KHz , t = 48min for all xyz axes 4 times 0 / 22 * : Refer to forward current vs. derating curve diagram Failure Criteria Items Symbols Conditions Failure Criteria luminous Intensity lv IF = 20mA Testing Min. Value <Spec.Min.Value x 0.5 Forward Voltage VF IF = 20mA Testing Max. Value ≥Spec.Max.Value x 1.2 Reverse Current IR VR = Maximum Rated Reverse Voltage Testing Max. Value ≥Spec.Max.Value x 2.5 High temp. storage test - SPEC NO: DSAL3633 APPROVED: Wynec REV NO: V.4A CHECKED: Allen Liu - Occurrence of notable decoloration, deformation and cracking DATE: SEP/01/2015 PAGE: 9 OF 9 DRAWN: M.Liu ERP: 1203012080