Amphenol NPC-1210-015-A-3-S High sensitivity Datasheet

NPC-1210 Series
NovaSensor Medium/
Low Pressure Sensors
Features
• High sensitivity
• High accuracy
• Interchangeable
Applications
• Industrial automation
• Air flow monitors
• Temperature compensated 0°C to 60°C (32°F to 140°F)
• Process control
• PCB mountable package
• Medical equipment
• DIP package
• Solid-state reliability
• Individual device traceability
• Underground cable leak detection
• Ventilation
• Respirator monitoring
Amphenol
Advanced Sensors
NPC-1210 Series Specifications
Description
Pressure Sensor
1
-Out The NPC-1210 series of solid-state pressure sensors
are designed to provide a cost effective solution for
applications that require calibrated performance over
a wide temperature range. Packaged in a dual-in-line
configuration, the NPC-1210 Series is intended for printed
circuit board mounting. Optional pressure port and lead
configurations provide superior flexibility in low profile
applications where pressure connection orientation is
critical.
+
A2
-
-
R
1.5 mA
4
+In
5
Gain
Set
6
+Out I
100 kW
3.012V
Amplified FSO
100 kW
3
R
A3
+
+
-In
The NPC-1210 series is based on NovaSensor’s advanced
SenStable® piezoresistive sensing technology. Silicon
micromachining techniques are used to ion implant
piezoresistive strain gages into a Wheatstone bridge
configuration. The NPC-1210 Series offers the added
advantage of superior temperature performance over the
temperature compensated range of 0°C to 60°C (32°F to
140°F). A gain set resistor is included to normalize the FSO
for field interchangeability.
7 8 2
NC
NC
Lead
1
2
3
4
5,6
7,8
Ground
Connection
-Out
-In
+Out
+In
Gain-Set Resistor
No Connection
NPC-1210 Series Schematic Diagram
0.60 in (15.24 mm)
0.1 in
(2.54 mm)
0.15 in
(3.8 mm)
8 7 6
5
0.6 in (15.24 mm
G6
0.2 in
(5.1 mm)
0.32 in
(8.1 mm)
1 2 3 4
0.12 in (3.05 mm)
0.37 in (9.4 mm)
Used for positive differential
L, S (See Notes)
Not used
for absolute
0.167 in
(4.2mm)
Diameter 0.127 in
(3.23 mm), Two tubes
Not used
for gauge
Ceramic
substrate
(1)
8X 0.07 in
(1.78mm)
8X 0.34 in
(8.6 mm)
(3)
8X 0.02 in (0.51 mm)
1. All dimensions are for reference only.
2. Tube length: L = 0.49 in (12 mm), S = 0.33 in (8.3 mm), N = No tube
3. Lead pins can be either in the same or the opposite direction of the pressure tube. Option (1) has the leads
in the "Up" position, the same direction as the tube. Option (3) has the leads in the "Down" position, the
opposite direction from the tube.
NPC-1210 Series Package Diagram
NPC-1210 Series Specifications
Medium Pressure Sensors
Low Pressure Sensors
• Gauge and differential:
• 5 psi (34 kPa, 0.34 bar)
• 15 psi (100 kPa, 1.0 bar)
• 30 psi (210 kPa, 2.1 bar)
• 50 psi (340 kPa, 3.4 bar)
• 100 psi (690 kPa, 6.9 bar)
• Absolute:
• 15 psi (100 kPa, 1.0 bar)
• 30 psi (210 kPa, 2.1 bar)
• 50 psi (340 kPa, 3.4 bar)
•100 psi (690 kPa, 6.9 bar)
• For other pressure ranges, please contact NovaSensor.
• Gauge and differential:
• 10 in H20 (2.5 kPa, 0.025 bar)
• 1 psi (6.9 kPa, 0.069 bar)
Pressure Ranges
Pressure Ranges
Parameter
Value
Units
Notes
Operating
–40 to 125
°C
(-40° to 257°F)
Compensated
0 to 60
°C
(32°F to 140°F)
Storage
–55 to 150
°C
(–67 to 302 °F)
Weight
2.5
g
(0.005 lb)
Media
Compatibility
Compatible with
exposed materials
Positive
differential and
gauge ports
Dry gases
only
Absolute.
negative
differential ports
Dry gases
only
Parameter
Units
Environmental
Temperature Range
Mechanical
Parameter
Value
Units
Notes
Environmental
Temperature Range
Operating
–40 to 125
°C
(-40° to 257°F)
Compensated
0 to 60
°C
(32°F to 140°F)
Storage
–55 to 150
°C
(–67 to 302 °F)
Mechanical
Weight
2.5
Media
Compatibility
Compatible with
exposed materials
g
Positive
differential and
gauge ports
Dry gases
only
Absolute.
negative
differential ports
Dry gases
only
Parameter
Units
(0.005 lb)
7
Minimum
7
Typical
Maximum
Notes
Performance Parameters *
Minimum
Typical
Maximum
Notes
Performance Parameters *
FS Output (FSO)
mV
75
100
150
2, 3
Zero Pressure
Output
mV
-2
—
2
3
Linearity
%FSO
-0.1
—
0.1
Pressure
Hysteresis
%FSO
-0.1
—
0.1
4, 8
Input Impedance
W
2500
4000
6000
Output
Impedance
W
4000
5000
6000
Thermal
Accuracy–Span
%FSO
-0.5
—
0.5
3, 5, 8
Thermal
Accuracy–Zero
%FSO
-0.5
—
0.5
3, 5, 8
Temperature
Coefficient–
Resistance
%/°C
—
0.2
—
5
Thermal
Hysteresis–Zero
%FSO
—
0.1
—
Input Excitation
mA
—
1.5
2.0
Pressure
Overload
Rated
—
—
3X
5
6
FSO 10 inH2O
mV
25
50
70
2, 3
FSO 1 psi
mV
50
75
110
2, 3
Zero Pressure
Output
mV
-2
—
2
3
Linearity
%FSO
-0.5
—
0.5
4
Pressure
Hysteresis
%FSO
-0.1
—
0.1
Input Impedance
W
2500
4000
6000
Output
Impedance
W
4000
5000
6000
Thermal
Accuracy–Span
%FSO
-1.0
—
1.0
3, 5
Thermal
Accuracy–Zero
%FSO
-1.25
—
1.25
3, 5
Temperature
Coefficient–
Resistance
%/°C
—
0.22
—
5
Thermal
Hysteresis–Zero
%FSO
—
0.1
—
5
Input Excitation
mA
—
1.5
2.0
Pressure
Overload
psi (bar)
5 (0.34)
—
—
6
* 1.Supply current = 1.5 mA and ambient temperature = 77°F (25°C),
unless otherwise noted.
2.Output span of unamplified sensor.
3.
Compensation resistors are an integral part of the sensor package;
no additional external resistors are required. Pins 7 and 8 must be kept open.
The NPC-1210 is interchangeable only when used with the gain set resistor
shown in the schematic diagram. Maximum gain-set resistor mismatch is 2%.
4.Best fit straight line.
5.Temperature range 32°F to 140°F (0°C to 60°C), reference to 77°F (25°C).
6.3X or 200 psi (13.78 bar) maximum, whichever is less.
7.Exposed materials are pyrex, ceramic, silicon, epoxy, RTV, and stainless steel.
8.5 psi (0.34 bar) spec.: Linearity: 0.25 ±%FSO, TC-span: 0.75 ±%FSO, TC-zero: 0.75 ±%FSO. otherwise noted.
NPC-1210 Series Specifications
Ordering Information
The code number to be ordered may be specified as follows:
NPC-1210 (Medium Pressure)
Code
Pressure Range
005 5 psi (0.3 bar)
015
15 psi (1 bar)
030
30 psi (2 bar)
050
50 psi (3.4 bar)
100
100 psi (7 bar)
Code
Type
D
Differential
A
Absolute
G
Gauge
Code
Lead Configurations
1Up
3
Down
Code
Tube Options
L
Long
S
Short
N
None *
NPC-1210 - ___ - ___ - ___ - ___ Typical model number
* Order NPC-1210-XXXG-XN in place of NPC-1210-XXXD-XN Warranty
Amphenol Advanced Sensors warrants its products
against defects in material and workmanship for
12 months from the date of shipment. Products not
subjected to misuse will be repaired or replaced.
Amphenol Advanced Sensors reserves the right to
make changes without further notice to any products
herein. NovaSensor makes no warranty, representation
or guarantee regarding the suitability of its products
for any particular application, nor does Amphenol
Advanced Sensors assume any liability arising out of
the application or use of any product or circuit and
specifically disclaims and all liability without limitation
consequential or incidental damages. The foregoing
warranties are exclusive and in lieu of all other
warranties, whether written, oral, implied or statutory.
No implied statutory warranty of merchantability or
fitness for particular purpose shall apply.
The code number to be ordered may be specified as follows:
NPC-1210 (Low Pressure)
Code
Pressure Range
10W
10 in H2O (25 mbar)
001
1 psi (69 mbar)
Code
Type
D
Differential
G
Gauge
Code
Lead Configurations
1Up
3
Down
Code
Tube Options
L
Long
S
Short
NPC-1210 - ___ - ___ - ___ - ___ Typical model number Amphenol
Advanced Sensors
www.amphenol-sensors.com
© 2014 Amphenol Corporation. All Rights Reserved. Specifications are subject to change without notice.
Other company names and product names used in this document are the registered trademarks or
trademarks of their respective owners.
AAS-920-303C-08/2014
Similar pages