FMAD CEE 3-Phase AC Filters / DC Filters www.schurter.com /PG80 1-stage filter with 3-phase CEE connector Description - 3 Phase CEE Connector with Filter - Easy and time saving handling Unique Selling Proposition - First CEE power entry module with EMC filter Easy prewired solution Universal flange for front or rear mounting Optimal filter position direct on the power entry Approvals Applications - Protection against interference voltage from the mains - Possible interferences generated in the equipment are strongly attenuated - Suitable for equipment with detachable power cord Weblinks pdf-datasheet, html-datasheet, General Product Information, Approvals, CE declaration of conformity, RoHS, CHINA-RoHS, REACH, DistributorStock-Check, Detailed request for product - UL File Number: E72928 - ENEC File Number: SE/09137-4 Technical Data Rated Current Rated voltage Approval for Overload Current Leakage Current Dielectric Strength Number of Filter Stages Weight Material: Housing Sealing Compound 16 - 32 A @ Ta 40 °C 277/480 VAC, 50/60 Hz 16 - 32 A / 277/480 VAC 1.5 x Ir industrial < 10 mA (440 V / 50 Hz) 277/480 VAC: 2.25 kVDC between L-L 1.7 kVDC between L-N 3 kVDC between L-PE Test voltage (2 sec) 1-stage 1.4 kg Metal UL 94V-0 Mounting Terminal Operating Temperature Climatic Category Degree of Protection Protection Class MTBF Screw-on mounting on chassis Screw clamps -40 °C to 85 °C 40/085/21 acc. to IEC 60068-1 IP 20 acc. to IEC 60529 Suitable for appliances with protection class I acc. to IEC 61140 > 200'000 h acc. to MIL-HB-217 F EMC Products 1 FMAD CEE 3-Phase AC Filters / DC Filters www.schurter.com /PG80 Dimension Case QT1 100 ±0.3 34.5 max.180 61 ±0.2 25 45 ±0.3 61 ±0.2 max.81 5.3 (4x) 15 max.111 47 max.120 L1' L2' 2) L3' N 1) PE 4 mm2 ; 0.5-0.6 Nm (5x) 3) 4) 1) Line 2) Load 3) Blue 4) Yellow-Green Case QT3 100 ±0.3 34.5 max.195 61 ±0.2 24 56 max.120 1) L1' L2' 2) L3' N PE 1) Line 2) Load 3) Blue 4) Yellow-Green 2 EMC Products 10 mm 2 ; 1.5-1.8 Nm (5x) 3) 4) max.81 45 ±0.3 61 ±0.2 5.3 (4x) 15 max.111 FMAD CEE 3-Phase AC Filters / DC Filters www.schurter.com /PG80 Diagrams L L1 L1' C1 L2 R1 C1 L 2' R1 1) L 3 L 3' C1 N C2 PE 2) R1 N' R2 PE' 1) Line 2) Load . . . . . 0.1/100Ω differential mode Attenuation Loss ........... 100/0.1Ω differential mode - - - - 50Ω differential mode _____ 50Ω common mode Industrial version 16 A 30 / 32 A All Variants Rated Current @ Ta 50°C (40°C) [A] Rated Voltage [VAC] Powerloss @ 25°C, 50Hz [W] Leakage Current @ 400VAC, 50Hz Weight [kg] Screw clamps [mm2] 2) Housings Packaging unit 16 240/415 5.6 10 1.3 kg 4 QT1 1 FMAD-T4QT-1660.EU █ 30 277/480 4.3 10 1.4 kg 10 QT3 1 FMAD-T4QT-3060.US █ 32 240/415 4.9 10 1.4 kg 10 QT3 1 FMAD-T4QT-3260.EU █ Order Number █ Most Popular. Availability for all products can be searched real-time:http://www.schurter.com/Stock-Check/Stock-Check-SCHURTER 1) Nominal leakage current acc. to IEC60950 - 5.2.5. under normal operating conditions. Note: worst case leakage current acc. to IEC60950 - Annex G4 (situation with two interrupted lines) can be much higher. 21.11.2016 2) Maximum conductor cross section (wire gauge) to be used; a comparative table for AWG and mm² values can be found in the general product information www.schurter. com/emc_info The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. EMC Products 3