NXP NCX2222GF Low voltage comparator; open-drain output Datasheet

NCX2222
Low voltage comparator; open-drain output
Rev. 1 — 20 December 2012
Product data sheet
1. General description
The NCX2222 provides a dual, low voltage, low-power comparator with open-drain
outputs.
The NCX2222 has a very low supply current of 5 A per comparator and is guaranteed to
operate at a low voltage of 1.3 V. It is fully operational up to 5.5 V which makes it
convenient for use in both 3.0 V and 5.0 V systems.
2. Features and benefits








Wide supply voltage range from 1.3 V to 5.5 V (functional operating range)
Rail-to-rail input/output performance
Very low supply current of 5 A (typical) per comparator
Very low-power consumption
No phase inversion with overdriven input signals
Internal hysteresis
Propagation delay of 0.8 s (typical)
ESD protection:
 HBM JESD22-A114F Class 1C. Exceeds 1500 V
 CDM JESD22-C101E exceeds 1000 V
 Multiple package options
 Specified from 40 C to +85 C
3. Applications
 Cellular telephones
 Alarm and security systems
 Personal Digital assistants
NCX2222
NXP Semiconductors
Low voltage comparator; open-drain output
4. Ordering information
Table 1.
Ordering information
Type number
Package
Temperature
range
Name
Description
Version
NCX2222DP
40 C to +85 C
TSSOP8
plastic thin shrink small outline package; 8 leads; body
width 3 mm; lead length 0.5 mm
SOT505-2
NCX2222GU
40 C to +85 C
HXSON8
plastic, thermal enhanced extremely thin small outline
SOT972-2[1]
package; no leads; 8 terminals; body 1.35  1.7  0.5 mm
NCX2222GT
40 C to +85 C
XSON8
plastic extremely thin small outline package; no leads;
8 terminals; body 1  1.95  0.5 mm
SOT833-1
NCX2222GF
40 C to +85 C
XSON8
extremely thin small outline package; no leads;
8 terminals; body 1.35  1  0.5 mm
SOT1089
NCX2222GM
40 C to +85 C
XQFN8
plastic, extremely thin quad flat package; no leads;
8 terminals; body 1.6  1.6  0.5 mm
SOT902-2
[1]
Lead pitch is 0.4 mm.
5. Marking
Table 2.
Marking codes
Type number
Marking[1]
NCX2222DP
gb
NCX2222GU
gb
NCX2222GT
gb
NCX2222GF
gb
NCX2222GM
gb
[1]
The pin 1 indicator is located on the lower left corner of the device, below the marking code.
6. Functional diagram
,1
,1
,1
,1
287
287
DDD
Fig 1.
Logic symbol
NCX2222
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 20 December 2012
© NXP B.V. 2012. All rights reserved.
2 of 18
NCX2222
NXP Semiconductors
Low voltage comparator; open-drain output
7. Pinning information
7.1 Pinning
1&;
287
9&&
,1
287
,1
,1
9((
,1
1&;
287
9&&
,1
287
,1
,1
9((
,1
9(( DDD
7UDQVSDUHQWWRSYLHZ
7UDQVSDUHQWWRSYLHZ
(1) This is not a supply pin, the substrate is attached to this
pad using conductive die attach material. There is no
electrical or mechanical requirement to solder this pad.
However, if it is soldered, the solder land must remain
floating or be connected to VEE.
Pin configuration SOT972-2
Pin configuration SOT833-1 and SOT1089
9&&
,1
287
,1
9((
287
,1
Fig 3.
1&;
WHUPLQDO
LQGH[DUHD
Fig 2.
1&;
,1
DDD
287
9&&
287
,1
,1
,1
9((
,1
7UDQVSDUHQWWRSYLHZ
Fig 4.
Pin configuration SOT902-2
NCX2222
Product data sheet
DDD
Fig 5.
Pin configuration SOT505-2
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 20 December 2012
© NXP B.V. 2012. All rights reserved.
3 of 18
NCX2222
NXP Semiconductors
Low voltage comparator; open-drain output
7.2 Pin description
Table 3.
Pin description
Symbol
Pin
Description
OUT1
1
comparator output 1
IN1
2
comparator input 1 (negative)
IN1+
3
comparator input 1 (positive)
VEE
4
supply voltage
IN2+
5
comparator input 2 (positive)
IN2
6
comparator input 2 (negative)
OUT2
7
comparator output 2
VCC
8
supply voltage
8. Limiting values
Table 4.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to VEE.
Symbol
Parameter
VCC
supply voltage
Conditions
Min
Max
Unit
-
7.0
V
0.5
VCC + 0.5
V
VEE  0.5
7.0
V
-
indefinite
s
maximum junction
temperature
-
+150
C
Tstg
storage temperature
65
+150
C
Ptot
total power dissipation
-
250
mW
VI
input voltage
VO
output voltage
tsc(o)
output short-circuit time
Tj(max)
[1]
IN1, IN1+, IN2, IN2+ inputs
[1]
Tamb = 40 C to +85 C
Do not exceed the maximum total power dissipation.
9. Recommended operating conditions
Table 5.
Recommended operating conditions
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
VCC
supply voltage
VCC to VEE
full spec operating range
1.6
-
5.5
V
functional operating range
1.3
-
5.5
V
VI
input voltage
VEE
-
VCC
V
VO
output voltage
VEE
-
5.5
V
Tamb
ambient temperature
40
-
+85
C
NCX2222
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 20 December 2012
© NXP B.V. 2012. All rights reserved.
4 of 18
NCX2222
NXP Semiconductors
Low voltage comparator; open-drain output
10. Static characteristics
Table 6.
Static characteristics
At recommended operating conditions. VCC = 1.6 V to 5.5 V, VEE = 0 V; VCM = 0.5VCC unless otherwise specified.
Symbol Parameter
25 C
Conditions
Min
Max
Min
Max
6
9
13
-
-
mV
-
20
-
-
-
mV
[1]
30
+0.5
+30
30
+30
mV
[1]
-
3
-
-
-
mV
VCC = 1.3 V
VI(offset)
offset input voltage
VCC = 1.3 V
LOW-level output
voltage
VOL
Unit
Typ
hysteresis voltage
VH
40 C to +85 C
IO = 0.5 mA; VCC = 1.3 V
-
0.05
-
-
-
V
IO = 0.5 mA; VCC = 1.6 V
-
0.04
-
-
0.25
V
IO = 3 mA; VCC = 3.0 V
-
0.14
-
-
0.3
V
IO = 5 mA; VCC = 5.5 V
-
0.20
-
-
0.3
V
IOZ
OFF-state output
current
IN = VEE; IN+ = VCC; VO = 5.5
V
-
3
-
-
-
nA
VCM
common-mode
voltage
VCC = 1.3 V to 5.5 V
-
VEE to VCC
-
-
-
V
IOS
output short-circuit VCC = 5.5 V; VO = VEE or VCC
current
-
68
-
-
-
mA
CMRR
common-mode
rejection ratio
VCM = VCC
-
70
-
-
-
dB
PSRR
power supply
rejection ratio
VCC = 1.95 V
45
80
-
-
-
dB
IIB
input bias current
-
1.0
-
-
-
pA
ICC
supply current
-
5.0
-
-
7.0
A
[1]
per comparator
Differential input switching level is guaranteed at the minimum or maximum offset voltage, minus or plus half the maximum hysteresis
voltage.
11. Dynamic characteristics
Table 7.
Dynamic characteristics
Voltages are referenced to VEE (VEE = 0 V);VCC = 1.6 V to 5.5 V; VCM = 0.5VCC unless otherwise specified.
Symbol
Parameter
25 C
Conditions
tpd
propagation delay
20 mV overdrive; CL = 15 pF
[1]
tt
transition time
HIGH to LOW; VCC = 5.5 V; CL = 50 pF
[2]
[1]
tpd is the same as tPLZ and tPZL; tPLZ is the actual time that the output is disabled.
[2]
Input signal: 1 kHz, square wave signal with 10 ns edge rate.
NCX2222
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 20 December 2012
Unit
Min
Typ
Max
-
0.8
-
s
-
10
-
ns
© NXP B.V. 2012. All rights reserved.
5 of 18
NCX2222
NXP Semiconductors
Low voltage comparator; open-drain output
12. Graphs
001aan901
9.0
ICC
(μA)
DDD
,&&
—$
7.0
5.0
3.0
1.0
-40
-20
0
20
40
60
80
100
Temp (°C)
I N+]
Tamb = 25 C; CL = 15 pF.
VCC = 5.0 V.
(1) VCC = 5.0 V.
(2) VCC = 2.7 V.
Fig 6.
Supply current versus temperature (per
comparator)
Fig 7.
Supply current versus output transition
frequency (per comparator)
001aan903
8.0
ICC
(μA)
001aan858
103
VOL
(mV)
6.0
102
(1)
4.0
(2)
10
(3)
2.0
1
0.0
0.0
2.0
4.0
6.0
10-1
10-2
VCC (V)
10-1
1
10
IO (mA)
(1) Tamb = 40 C.
Tamb = 25 C.
(2) Tamb = 25 C.
VCC = 5.0 V.
(3) Tamb = 85 C.
Fig 8.
Supply current versus supply voltage (per
comparator)
NCX2222
Product data sheet
Fig 9.
LOW-level output voltage versus output
current
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 20 December 2012
© NXP B.V. 2012. All rights reserved.
6 of 18
NCX2222
NXP Semiconductors
Low voltage comparator; open-drain output
001aan860
220
VOL
(mV)
180
001aan861
1400
tpd
(ns)
1000
(1)
600
(2)
140
100
60
20
-40
0
40
80
200
-50
120
Temp (°C)
0
50
100
Temp (°C)
VCC = 5.0 V; input overdrive = 50 mV.
IO = 4.0 mA.
VCC = 5.0 V.
(1) tPLZ.
(2) tPZL.
Fig 10. LOW-level output voltage versus temperature
Fig 11. Propagation delay versus temperature
001aan862
700
tpd
(ns)
500
(1)
300
(2)
100
1
2
3
4
5
6
VCC (V)
Tamb = 25 C; input overdrive = 100 mV.
(1) tPLZ.
(2) tPZL.
Fig 12. Propagation delay versus supply voltage.
NCX2222
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 20 December 2012
© NXP B.V. 2012. All rights reserved.
7 of 18
NCX2222
NXP Semiconductors
Low voltage comparator; open-drain output
13. Application information
13.1 Operating description
The NCX2222 is a dual, low voltage, low-power comparator with open-drain output. This
device is designed for use with a pull-up resistor to define the output switching levels. This
device consumes only 5 A per comparator of supply current while achieving a typical
propagation delay of 0.8 s at a 20 mV input overdrive. Figure 11 and Figure 12 show
propagation delay with various input overdrives. This comparator is guaranteed to operate
at a low voltage of 1.3 V up to 5.5 V. The common-mode input voltage range extends 0.1
V beyond the upper and lower rail without phase inversion or other adverse effects. This
device has a typical internal hysteresis of 9.0 mV which allows for greater noise immunity
and clean output switching.
13.2 Output stage
The NCX2222 has an N-channel output stage that has the capability of sinking the output
to VEE with a load ranging up to 5.0 mA (see Figure 13).
VCC
IN+
output
IN-
VEE
aaa-000067
Fig 13. NCX2222 output configuration (one comparator)
13.3 Zero-crossing detector
Figure 14 shows the NCX2222 configured as a zero-crossing detector.
9&&
,1
,1
9&&
538
287
1&;
P9
DDD
Fig 14. Zero-crossing detector
NCX2222
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 20 December 2012
© NXP B.V. 2012. All rights reserved.
8 of 18
NCX2222
NXP Semiconductors
Low voltage comparator; open-drain output
13.4 Logic level translator
Figure 15 shows the NCX2222 configured as a logic level translator.
9
9
538
Nȍ
,1
Nȍ
,1
287
1&;
9ORJLFLQSXW
9ORJLFRXWSXW
DDD
This circuit converts 3 V logic to 5 V logic.
Fig 15. Logic level translator
NCX2222
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 20 December 2012
© NXP B.V. 2012. All rights reserved.
9 of 18
NCX2222
NXP Semiconductors
Low voltage comparator; open-drain output
14. Package outline
TSSOP8: plastic thin shrink small outline package; 8 leads; body width 3 mm; lead length 0.5 mm
D
E
A
SOT505-2
X
c
HE
y
v M A
Z
5
8
A
A2
(A3)
A1
pin 1 index
θ
Lp
L
1
4
e
detail X
w M
bp
0
2.5
5 mm
scale
DIMENSIONS (mm are the original dimensions)
UNIT
A
max.
A1
A2
A3
bp
c
D(1)
E(1)
e
HE
L
Lp
v
w
y
Z(1)
θ
mm
1.1
0.15
0.00
0.95
0.75
0.25
0.38
0.22
0.18
0.08
3.1
2.9
3.1
2.9
0.65
4.1
3.9
0.5
0.47
0.33
0.2
0.13
0.1
0.70
0.35
8°
0°
Note
1. Plastic or metal protrusions of 0.15 mm maximum per side are not included.
OUTLINE
VERSION
SOT505-2
REFERENCES
IEC
JEDEC
JEITA
EUROPEAN
PROJECTION
ISSUE DATE
02-01-16
---
Fig 16. Package outline SOT505-2 (TSSOP8)
NCX2222
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 20 December 2012
© NXP B.V. 2012. All rights reserved.
10 of 18
NCX2222
NXP Semiconductors
Low voltage comparator; open-drain output
HXSON8: plastic, thermal enhanced extremely thin small outline package; no leads;
8 terminals; body 1.35 x 1.7 x 0.5 mm
SOT972-2
X
A
B
D
E
A
A1
c
terminal 1
index area
detail X
e1
terminal 1
index area
e
1
6
C
C A B
C
v
w
b
y1 C
y
L
k
Eh
12
7
Dh
0
1
scale
Dimensions
Unit(1)
mm
max
nom
min
2 mm
A
0.5
A1
b
c
D
0.05 0.25
1.8
0.20 0.127 1.7
0.00 0.15
1.6
Dh
1.3
1.2
1.1
E
Eh
1.45 0.45
1.35 0.40
1.25 0.35
e
e1
0.4
k
L
v
0.1
0.2
0.30
0.25
0.20
1.2
w
y
y1
0.05 0.05 0.05
Note
1. Plastic or metal protrusions 0.0075 mm maximum per side are not included.
References
Outline
version
IEC
JEDEC
JEITA
SOT972-2
---
---
---
sot972-2_po
European
projection
Issue date
09-12-11
10-03-23
Fig 17. Package outline SOT972-2 (HXSON8)
NCX2222
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 20 December 2012
© NXP B.V. 2012. All rights reserved.
11 of 18
NCX2222
NXP Semiconductors
Low voltage comparator; open-drain output
XSON8: plastic extremely thin small outline package; no leads; 8 terminals; body 1 x 1.95 x 0.5 mm
1
2
SOT833-1
b
4
3
4×
(2)
L
L1
e
8
7
6
e1
5
e1
e1
8×
A
(2)
A1
D
E
terminal 1
index area
0
1
2 mm
scale
DIMENSIONS (mm are the original dimensions)
UNIT
A(1)
max
A1
max
b
D
E
e
e1
L
L1
mm
0.5
0.04
0.25
0.17
2.0
1.9
1.05
0.95
0.6
0.5
0.35
0.27
0.40
0.32
Notes
1. Including plating thickness.
2. Can be visible in some manufacturing processes.
REFERENCES
OUTLINE
VERSION
IEC
JEDEC
JEITA
SOT833-1
---
MO-252
---
EUROPEAN
PROJECTION
ISSUE DATE
07-11-14
07-12-07
Fig 18. Package outline SOT833-1 (XSON8)
NCX2222
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 20 December 2012
© NXP B.V. 2012. All rights reserved.
12 of 18
NCX2222
NXP Semiconductors
Low voltage comparator; open-drain output
XSON8: extremely thin small outline package; no leads;
8 terminals; body 1.35 x 1 x 0.5 mm
SOT1089
E
terminal 1
index area
D
A
A1
detail X
(4×)(2)
e
L
(8×)(2)
b 4
5
e1
1
terminal 1
index area
8
L1
X
0
0.5
scale
Dimensions
Unit
mm
max
nom
min
1 mm
A(1)
0.5
A1
b
D
E
e
e1
L
L1
0.35 0.40
0.04 0.20 1.40 1.05
0.15 1.35 1.00 0.55 0.35 0.30 0.35
0.27 0.32
0.12 1.30 0.95
Note
1. Including plating thickness.
2. Visible depending upon used manufacturing technology.
Outline
version
SOT1089
sot1089_po
References
IEC
JEDEC
JEITA
European
projection
Issue date
10-04-09
10-04-12
MO-252
Fig 19. Package outline SOT1089 (XSON8)
NCX2222
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 20 December 2012
© NXP B.V. 2012. All rights reserved.
13 of 18
NCX2222
NXP Semiconductors
Low voltage comparator; open-drain output
XQFN8: plastic, extremely thin quad flat package; no leads;
8 terminals; body 1.6 x 1.6 x 0.5 mm
SOT902-2
X
A
B
D
terminal 1
index area
E
A
A1
detail X
e
v
w
b
4
3
C
C A B
C
y
y1 C
5
e1
2
6
1
7
terminal 1
index area
8
L
metal area
not for soldering
L1
0
1
Dimensions
Unit(1)
mm
max
nom
min
2 mm
scale
A
0.5
A1
b
D
E
e
e1
0.05 0.25 1.65 1.65
0.20 1.60 1.60 0.55
0.00 0.15 1.55 1.55
0.5
L
L1
v
0.35 0.15
0.30 0.10
0.25 0.05
0.1
w
y
y1
0.05 0.05 0.05
Note
1. Plastic or metal protrusions of 0.075 mm maximum per side are not included.
References
Outline
version
IEC
JEDEC
JEITA
SOT902-2
---
MO-255
---
sot902-2_po
European
projection
Issue date
10-11-02
11-03-31
Fig 20. Package outline SOT902-2 (XQFN8)
NCX2222
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 20 December 2012
© NXP B.V. 2012. All rights reserved.
14 of 18
NCX2222
NXP Semiconductors
Low voltage comparator; open-drain output
15. Abbreviations
Table 8.
Abbreviations
Acronym
Description
CDM
Charged Device Model
ESD
ElectroStatic Discharge
HBM
Human Body Model
16. Revision history
Table 9.
Revision history
Document ID
Release date
Data sheet status
Change notice
Supersedes
NCX2222 v.1
20121220
Product data sheet
-
-
NCX2222
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 20 December 2012
© NXP B.V. 2012. All rights reserved.
15 of 18
NCX2222
NXP Semiconductors
Low voltage comparator; open-drain output
17. Legal information
17.1 Data sheet status
Document status[1][2]
Product status[3]
Definition
Objective [short] data sheet
Development
This document contains data from the objective specification for product development.
Preliminary [short] data sheet
Qualification
This document contains data from the preliminary specification.
Product [short] data sheet
Production
This document contains the product specification.
[1]
Please consult the most recently issued document before initiating or completing a design.
[2]
The term ‘short data sheet’ is explained in section “Definitions”.
[3]
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
17.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
NXP Semiconductors and its customer, unless NXP Semiconductors and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the NXP Semiconductors product is
deemed to offer functions and qualities beyond those described in the
Product data sheet.
17.3 Disclaimers
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, NXP Semiconductors does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information. NXP Semiconductors takes no
responsibility for the content in this document if provided by an information
source outside of NXP Semiconductors.
In no event shall NXP Semiconductors be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of NXP Semiconductors.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
NCX2222
Product data sheet
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in life support, life-critical or
safety-critical systems or equipment, nor in applications where failure or
malfunction of an NXP Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors and its suppliers accept no liability for
inclusion and/or use of NXP Semiconductors products in such equipment or
applications and therefore such inclusion and/or use is at the customer’s own
risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Customers are responsible for the design and operation of their applications
and products using NXP Semiconductors products, and NXP Semiconductors
accepts no liability for any assistance with applications or customer product
design. It is customer’s sole responsibility to determine whether the NXP
Semiconductors product is suitable and fit for the customer’s applications and
products planned, as well as for the planned application and use of
customer’s third party customer(s). Customers should provide appropriate
design and operating safeguards to minimize the risks associated with their
applications and products.
NXP Semiconductors does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
customer’s applications or products, or the application or use by customer’s
third party customer(s). Customer is responsible for doing all necessary
testing for the customer’s applications and products using NXP
Semiconductors products in order to avoid a default of the applications and
the products or of the application or use by customer’s third party
customer(s). NXP does not accept any liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — NXP Semiconductors
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nxp.com/profile/terms, unless otherwise
agreed in a valid written individual agreement. In case an individual
agreement is concluded only the terms and conditions of the respective
agreement shall apply. NXP Semiconductors hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of NXP Semiconductors products by customer.
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 20 December 2012
© NXP B.V. 2012. All rights reserved.
16 of 18
NCX2222
NXP Semiconductors
Low voltage comparator; open-drain output
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
Non-automotive qualified products — Unless this data sheet expressly
states that this specific NXP Semiconductors product is automotive qualified,
the product is not suitable for automotive use. It is neither qualified nor tested
in accordance with automotive testing or application requirements. NXP
Semiconductors accepts no liability for inclusion and/or use of
non-automotive qualified products in automotive equipment or applications.
In the event that customer uses the product for design-in and use in
automotive applications to automotive specifications and standards, customer
(a) shall use the product without NXP Semiconductors’ warranty of the
product for such automotive applications, use and specifications, and (b)
whenever customer uses the product for automotive applications beyond
NXP Semiconductors’ specifications such use shall be solely at customer’s
own risk, and (c) customer fully indemnifies NXP Semiconductors for any
liability, damages or failed product claims resulting from customer design and
use of the product for automotive applications beyond NXP Semiconductors’
standard warranty and NXP Semiconductors’ product specifications.
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
17.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
18. Contact information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
NCX2222
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 20 December 2012
© NXP B.V. 2012. All rights reserved.
17 of 18
NCX2222
NXP Semiconductors
Low voltage comparator; open-drain output
19. Contents
1
2
3
4
5
6
7
7.1
7.2
8
9
10
11
12
13
13.1
13.2
13.3
13.4
14
15
16
17
17.1
17.2
17.3
17.4
18
19
General description . . . . . . . . . . . . . . . . . . . . . . 1
Features and benefits . . . . . . . . . . . . . . . . . . . . 1
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Ordering information . . . . . . . . . . . . . . . . . . . . . 2
Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Functional diagram . . . . . . . . . . . . . . . . . . . . . . 2
Pinning information . . . . . . . . . . . . . . . . . . . . . . 3
Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 4
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 4
Recommended operating conditions. . . . . . . . 4
Static characteristics. . . . . . . . . . . . . . . . . . . . . 5
Dynamic characteristics . . . . . . . . . . . . . . . . . . 5
Graphs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Application information. . . . . . . . . . . . . . . . . . . 8
Operating description . . . . . . . . . . . . . . . . . . . . 8
Output stage . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Zero-crossing detector . . . . . . . . . . . . . . . . . . . 8
Logic level translator. . . . . . . . . . . . . . . . . . . . . 9
Package outline . . . . . . . . . . . . . . . . . . . . . . . . 10
Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Revision history . . . . . . . . . . . . . . . . . . . . . . . . 15
Legal information. . . . . . . . . . . . . . . . . . . . . . . 16
Data sheet status . . . . . . . . . . . . . . . . . . . . . . 16
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Contact information. . . . . . . . . . . . . . . . . . . . . 17
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© NXP B.V. 2012.
All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
Date of release: 20 December 2012
Document identifier: NCX2222
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
NXP:
NCX2222DPH NCX2222GMH
Similar pages