ACE ACE5019AA50BNA+H 18v low current consumption 350ma cmos voltage regulator Datasheet

ACE5019A
18V Low Current Consumption 350mA CMOS Voltage Regulator
Description
The ACE5019A series are a group of positive voltage regulators manufactured by CMOS technologies
with low power consumption and low dropout voltage, which provide large output currents even when the
difference of the input-output voltage is small. The ACE5019A series can deliver 300mA output current
and allow an input voltage as high as 18V. The series are very suitable for the battery-powered
equipments, such as RF applications and other systems requiring a quiet voltage source.
Features

Low Quiescent Current: 2μA

Operating Voltage Range: 2.5V~18V

Output Current: 350mA

Low Dropout Voltage:160mV@100mA(VOUT =3.3V)

Output Voltage: 1.2~ 5.0V

High Accuracy: ±2%/±1%(Typ.)

High Power Supply Rejection Ratio: 65dB@1kHz

Low Output Noise:

27xVOUT μVRMS (10Hz~100kHz)

Excellent Line and Load Transient Response

Built-in Current Limiter, Short-Circuit Protection
Application

Cordless Phones

Radio control systems

Laptop, Palmtops and PDAs

Single-lens reflex DSC

PC peripherals with memory

Wireless Communication Equipments

Portable Audio Video Equipments

Car Navigation Systems

LAN Cards

Ultra Low Power Microcontroller
VER 1.1
1
ACE5019A
18V Low Current Consumption 350mA CMOS Voltage Regulator
Absolute Maximum Ratings (1) Unless otherwise specified, TA=25°C
Parameter
Symbol
Max
Unit
VIN
-0.3~24
V
Output Voltage
VOUT
-0.3~10
V
CE PIN Voltage
VCE
-0.3~24
V
Output Current
IOUT
600
mA
Input Voltage(2)
(2)
SOT-23-3
Power Dissipation
0.4
SOT-23-5
Pd
0.4
SOT-89-3
0.6
(3)
Topr
- 40~125
O
C
Tstg
- 40~125
O
C
Tsolder
260
O
C
Human Body Model -(HBM)
8
kV
Machine Model- (MM)
400
V
Operating Junction Temperature Range
Storage Temperature
Lead Temperature(Soldering, 10 sec)
(4)
W
ESD rating
Note:
(1)
Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the
device. These are stress ratings only, and functional operation of the device at these or any other
conditions beyond those indicated under recommended operating conditions is not implied.
Exposure to absolute-maximum-rated conditions for extended periods my affect device reliability.
(2)
All voltages are with respect to network ground terminal.
(3)
The ACE5019A includes over temperature protection that is intended to protect the device during
momentary overload. Junction temperature will exceed 125°C when over temperature protection is
active. Continuous operation above the specified maximum operating junction temperature may
impair device reliability.
(4)
ESD testing is performed according to the respective JESD22 JEDEC standard.
The human body model is a 100 pF capacitor discharged through a 1.5kΩ resistor into each pin. The
machine model is a 200pF capacitor discharged directly into each pin.
Recommended Operating Conditions
Parameter
MIN.
MAX.
Units
Supply voltage at VIN
2.5
18
V
Operating junction temperature range, Tj
-40
125
°C
Operating free air temperature range, TA
-40
85
°C
VER 1.1
2
ACE5019A
18V Low Current Consumption 350mA CMOS Voltage Regulator
Packaging Type
SOT-23-3
SOT-23-5
SOT-23-3
SOT-89-3
SOT-23-5
SOT-89-3
Pin Name
Function
2
VSS
Ground
1
3
VOUT
Output
3
1
VIN
Power input
3
CE
Chip Enable Pin
4
NC
No Connection
A
B
C
A
B
C
A
B
C
1
3
3
2
1
2
1
2
2
2
1
5
3
5
3
3
1
2
1
2
1
2
3/4
4/5
Ordering information
ACE5019A X XX XX + H
Halogen - free
Pb - free
BMA:SOT-23-3A
BMB:SOT-23-3B
BMC:SOT-23-3C
BNA:SOT-23-5A
BNB:SOT-23-5B
BNC:SOT-23-5C
AMA:SOT-89-3A
AMB:SOT-89-3B
AMC:SOT-89-3C
Output Voltage:1.2 / 1.5V …../5.0V
A:1%
B:2%
VER 1.1
3
ACE5019A
18V Low Current Consumption 350mA CMOS Voltage Regulator
Block Diagram
Typical Application Circuit
VER 1.1
4
ACE5019A
18V Low Current Consumption 350mA CMOS Voltage Regulator
Electrical Characteristics
(VIN=VOUT+1V, C IN=COUT =1μF,
TA=25 OC, unless otherwise specified)
Parameter
Symbol
Input Voltage
VIN
Output Voltage Range
VOUT
DC Output Accuracy
Conditions
IOUT =1mA
Vdif(2)
VOUT=3.3V
Supply Current
ISS
IOUT =0A
∆VOUT
IOUT =10mA
VOUT ✕∆V IN
VOUT +1V≤VIN≤18V
∆VOUT
VIN= VOUT +1V,
Load Regulation
Temperature Coefficient
IOUT =10mA,
VOUT ✕∆TA
-40°C<TA<125°C
Output Current Limit
ILIM
Short Current
ISHORT
Power Supply Rejection
Ratio
Output Noise Voltage
Thermal Shutdown
Temperature
Thermal Shutdown
Hysteresis
PSRR
18
V
1.2
5
V
-2
2
%
-1
1
%
160
VOUT=0.5xVOUT(Normal),
VIN = 5V
VOUT =VSS
IOUT =50mA
350
mV
2
5
μA
0.01
0.3
%/V
10
mV
50
ppm
500
mA
25
mA
100Hz
80
1kHz
65
10kHz
50
100kHz
45
dB
μVRMS
TSD
150
°C
∆TSD
20
°C
ISTBY
CE "High" Voltage
VCE“H”
CE "Low" Voltage
VCE“L”
Resistance
2.5
27 x VOUT
VON
Standby Current
COUT Auto-Discharge
Units
1mA≤IOUT≤100mA
∆VOUT
Typ(1)
Max
IOUT =100mA,
Dropout Voltage
Line Regulation
Min
RDISCHRG
BW=10Hz to 100kHz
CE = VSS
1.5
VIN=5V, VOUT =3.0V,
VCE=VSS
150
0.2
VIN
μA
0.3
V
V
Ω
Note:
(1)
Typical numbers are at 25°C and represent the most likely norm.
(2)
Vdif:The Difference Of Output Voltage And Input Voltage When Input Voltage Is Decreased Gradually Till
Output Voltage Equals To 98% Of VOUT (E).
VER 1.1
5
ACE5019A
18V Low Current Consumption 350mA CMOS Voltage Regulator
Typical Performance Characteristics
VER 1.1
6
ACE5019A
18V Low Current Consumption 350mA CMOS Voltage Regulator
VER 1.1
7
ACE5019A
18V Low Current Consumption 350mA CMOS Voltage Regulator
Application Information
Selection of Input/ Output Capacitors
In general, all the capacitors need to be low leakage. Any leakage the capacitors have will reduce
efficiency, increase the quiescent current.
A recent trend in the design of portable devices has been to use ceramic capacitors to filter DC-DC
converter inputs. Ceramic capacitors are often chosen because of their small size, low equivalent series
resistance (ESR) and high RMS current capability. Also, recently, designers have been looking to ceramic
capacitors due to shortages of tantalum capacitors.
Unfortunately, using ceramic capacitors for input filtering can cause problems. Applying a voltage step to
a ceramic capacitor causes a large current surge that stores energy in the inductances of the power leads.
A large voltage spike is created when the stored energy is transferred from these inductances into the
ceramic capacitor. These voltage spikes can easily be twice the amplitude of the input voltage step. (See
“Ceramic Input Capacitors Can Cause Overvoltage Transients”——Linear Technology application note 88,
March 2001)
Many types of capacitors can be used for input bypassing; however, caution must be exercised when
using multilayer ceramic capacitors (MLCC). Because of the self-resonant and high Q characteristics of
some types of ceramic capacitors, high voltage transients can be generated under some start-up
conditions, such as connecting the LDO input to a live power source. Adding a 3Ω resistor in series with
an X5R ceramic capacitor will
minimize start-up voltage transients.
The LDO also requires an output capacitor for loop stability. Connect a 1μF tantalum capacitor from OUT
to GND close to the pins. For improved transient response, this output capacitor may be ceramic.
VER 1.1
8
ACE5019A
18V Low Current Consumption 350mA CMOS Voltage Regulator
Packing Information
SOT-23-3
VER 1.1
9
ACE5019A
18V Low Current Consumption 350mA CMOS Voltage Regulator
Packing Information
SOT-23-5
VER 1.1
10
ACE5019A
18V Low Current Consumption 350mA CMOS Voltage Regulator
Packing Information
SOT-89-3
VER 1.1
11
ACE5019A
18V Low Current Consumption 350mA CMOS Voltage Regulator
Notes
ACE does not assume any responsibility for use as critical components in life support devices or systems
without the express written approval of the president and general counsel of ACE Electronics Co., LTD.
As sued herein:
1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant
into the body, or (b) support or sustain life, and shoes failure to perform when properly used in
accordance with instructions for use provided in the labeling, can be reasonably expected to result in
a significant injury to the user.
2. A critical component is any component of a life support device or system whose failure to perform can
be reasonably expected to cause the failure of the life support device or system, or to affect its safety
or effectiveness.
ACE Technology Co., LTD.
http://www.ace-ele.com/
VER 1.1
12
Similar pages