Vishay MBR2545CT-1TRRP Schottky rectifier, 2 x 15 a Datasheet

MBRB25..CTPbF/MBR25..CT-1PbF
Vishay High Power Products
Schottky Rectifier, 2 x 15 A
FEATURES
MBR25..CT-1PbF
MBRB25..CTPbF
•
•
•
•
•
150 °C TJ operation
Available
Center tap D2PAK and TO-262 packages
RoHS*
Low forward voltage drop
COMPLIANT
High frequency operation
High purity, high temperature epoxy encapsulation for
enhanced mechanical strength and moisture resistance
• Guard ring for enhanced ruggedness and long term
reliability
• Lead (Pb)-free (“PbF” suffix)
• Designed and qualified for Q101 level
Base
common
cathode
2
Base
common
cathode
2
2
1 Common
3
Anode cathode Anode
2
1 Common
3
Anode cathode Anode
D2PAK
TO-262
DESCRIPTION
This center tap Schottky rectifier has been optimized for low
reverse leakage at high temperature. The proprietary barrier
technology allows for reliable operation up to 150 °C junction
temperature. Typical applications are in switching power
supplies, converters, freewheeling diodes, and reverse
battery protection.
PRODUCT SUMMARY
IF(AV)
2 x 15 A
VR
35/45 V
IRM
40 mA at 125 °C
MAJOR RATINGS AND CHARACTERISTICS
SYMBOL
CHARACTERISTICS
VALUES
IF(AV)
Rectangular waveform (per device)
30
IFRM
TC = 130 °C (per leg)
30
VRRM
IFSM
tp = 5 µs sine
VF
30 Apk, TJ = 125 °C
TJ
Range
UNITS
A
35/45
V
1060
A
0.73
V
- 65 to 150
°C
MBRB2535CTPbF,
MBR2535CT-1PbF
MBRB2545CTPbF,
MBR2545CT-1PbF
UNITS
35
45
V
VOLTAGE RATINGS
PARAMETER
SYMBOL
Maximum DC reverse voltage
VR
Maximum working peak reverse voltage
VRWM
ABSOLUTE MAXIMUM RATINGS
PARAMETER
Maximum average
forward current
SYMBOL
per leg
per device
Peak repetitive forward current per leg
TEST CONDITIONS
Non-repetitive peak surge current
Non-repetitive avalanche energy per leg
Repetitive avalanche current per leg
15
IF(AV)
TC = 130 °C, rated VR
IFRM
Rated VR, square wave, 20 kHz, TC = 130 °C
5 µs sine or 3 µs rect. pulse
IFSM
VALUES UNITS
30
Following any rated load condition
and with rated VRRM applied
30
1060
A
Surge applied at rated load conditions halfwave,
single phase, 60 Hz
150
EAS
TJ = 25 °C, IAS = 2 A, L = 8 mH
16
mJ
IAR
Current decaying linearly to zero in 1 µs
Frequency limited by TJ maximum VA = 1.5 x VR typical
2
A
* Pb containing terminations are not RoHS compliant, exemptions may apply
Document Number: 94308
Revision: 14-Aug-08
For technical questions, contact: [email protected]
www.vishay.com
1
MBRB25..CTPbF/MBR25..CT-1PbF
Vishay High Power Products Schottky Rectifier, 2 x 15 A
ELECTRICAL SPECIFICATIONS
PARAMETER
SYMBOL
Maximum forward voltage drop
VFM (1)
Maximum instantaneous
reverse current
IRM (1)
Threshold voltage
VF(TO)
Forward slope resistance
rt
TEST CONDITIONS
30 A
TJ = 25 °C
TJ = 25 °C
0.82
TJ = 125 °C
0.73
Rated DC voltage
TJ = 125 °C
VALUES
TJ = TJ maximum
0.2
40
UNITS
V
mA
0.355
V
12.3
mΩ
Maximum junction capacitance
CT
VR = 5 VDC (test signal range 100 kHz to 1 MHz) 25 °C
700
pF
Typical series inductance
LS
Measured from top of terminal to mounting plane
8.0
nH
10 000
V/µs
VALUES
UNITS
Maximum voltage rate of change
dV/dt
Rated VR
Note
(1) Pulse width < 300 µs, duty cycle < 2 %
THERMAL - MECHANICAL SPECIFICATIONS
PARAMETER
SYMBOL
TEST CONDITIONS
Maximum junction temperature range
TJ
- 65 to 150
Maximum storage temperature range
TStg
- 65 to 175
Maximum thermal resistance,
junction to case per leg
RthJC
DC operation
1.5
Typical thermal resistance,
case to heatsink
RthCS
Mounting surface, smooth and greased
0.50
°C/W
Approximate weight
Mounting torque
Marking device
www.vishay.com
2
minimum
maximum
°C
Non-lubricated threads
2
g
0.07
oz.
6 (5)
kgf · cm
(lbf · in)
12 (10)
Case style D2PAK
MBRB2545CT
Case style TO-262
MBR2545CT-1
For technical questions, contact: [email protected]
Document Number: 94308
Revision: 14-Aug-08
MBRB25..CTPbF/MBR25..CT-1PbF
Schottky Rectifier, 2 x 15 A Vishay High Power Products
100
TJ = 150 °C
TJ = 125 °C
TJ = 25 °C
10
1
0.2
IR - Reverse Current (mA)
IF - Instantaneous
Forward Current (A)
100
0.4
0.6
0.8
1.0
1.2
10
TJ = 150 °C
1
TJ = 125 °C
TJ = 100 °C
0.1
TJ = 75 °C
0.01
TJ = 50 °C
0.001
TJ = 25 °C
0.0001
1.4
0
5
10
15
20
25
30
35
40
45
VFM - Forward Voltage Drop (V)
VR - Reverse Voltage (V)
Fig. 1 - Maximum Forward Voltage Drop Characteristics
(Per Leg)
Fig. 2 - Typical Values of Reverse Current vs.
Reverse Voltage (Per Leg)
CT - Junction Capacitance (pF)
1000
TJ = 25 °C
100
0
10
20
30
40
50
VR - Reverse Voltage (V)
ZthJC - Thermal Impedance (°C/W)
Fig. 3 - Typical Junction Capacitance vs.
Reverse Voltage (Per Leg)
10
1
PDM
t1
D = 0.75
D = 0.50
D = 0.33
D = 0.25
D = 0.20
0.1
Single pulse
(thermal resistance)
0.01
0.00001
0.0001
0.001
0.01
t2
Notes:
1. Duty factor D = t1/t2
2. Peak TJ = PDM x ZthJC + TC
0.1
1
10
t1 - Rectangular Pulse Duration (s)
Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics (Per Leg)
Document Number: 94308
Revision: 14-Aug-08
For technical questions, contact: [email protected]
www.vishay.com
3
MBRB25..CTPbF/MBR25..CT-1PbF
14
150
Average Power Loss (W)
Allowable Case Temperature (°C)
Vishay High Power Products Schottky Rectifier, 2 x 15 A
140
DC
130
Square wave (D = 0.50)
Rated VR applied
120
110
D = 0.20
D = 0.25
D = 0.33
D = 0.50
D = 0.75
12
10
RMS limit
8
6
4
DC
2
See note (1)
0
100
0
4
8
12
16
20
0
24
5
10
15
20
25
IF(AV) - Average Forward Current (A)
Fig. 6 - Forward Power Loss Characteristics (Per Leg)
IFSM - Non-Repetitive Surge Current (A)
IF(AV) - Average Forward Current (A)
Fig. 5 - Maximum Allowable Case Temperature vs.
Average Forward Current (Per Leg)
1000
At any rated load condition
and with rated VRRM applied
following surge
100
10
100
1000
10 000
tp - Square Wave Pulse Duration (µs)
Fig. 7 - Maximum Non-Repetitive Surge Current (Per Leg)
Note
(1) Formula used: T = T - (Pd + Pd
C
J
REV) x RthJC;
Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6);
PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = Rated VR
www.vishay.com
4
For technical questions, contact: [email protected]
Document Number: 94308
Revision: 14-Aug-08
MBRB25..CTPbF/MBR25..CT-1PbF
Schottky Rectifier, 2 x 15 A Vishay High Power Products
ORDERING INFORMATION TABLE
Device code
MBR
B
25
45
CT
-1
1
2
3
4
5
6
1
-
2
-
B = D2PAK
-
4
-
Voltage ratings
5
-
CT = Essential part number
-
8
6 None
3
7
7
Essential part number
None = TO-262 6 = -1
Current rating (25 = 25 A)
6
TRL PbF
None = D2PAK
2 = B
-1 = TO-262
2 None
35 = 35 V
45 = 45 V
None = Tube (50 pieces)
TRL = Tape and reel (left oriented - for D2PAK only)
TRR = Tape and reel (right oriented - for D2PAK only)
8
-
None = Standard production
PbF = Lead (Pb)-free (for TO-262 and D2PAK tube)
P = Lead (Pb)-free (for D2PAK TRR and TRL)
LINKS TO RELATED DOCUMENTS
Dimensions
http://www.vishay.com/doc?95014
Part marking information
http://www.vishay.com/doc?95008
Packaging information
http://www.vishay.com/doc?95032
Document Number: 94308
Revision: 14-Aug-08
For technical questions, contact: [email protected]
www.vishay.com
5
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
Similar pages