TI1 CSD19506KTT 80 v n-channel nexfet power mosfet Datasheet

Sample &
Buy
Product
Folder
Support &
Community
Tools &
Software
Technical
Documents
CSD19506KTT
SLPS586 – MARCH 2016
CSD19506KTT 80 V N-Channel NexFET™ Power MOSFET
1 Features
•
•
•
•
•
•
•
1
Product Summary
Ultra-Low Qg and Qgd
Low Thermal Resistance
Avalanche Rated
Pb-Free Terminal Plating
RoHS Compliant
Halogen Free
D2PAK Plastic Package
TA = 25°C
TYPICAL VALUE
Drain-to-Source Voltage
80
V
Qg
Gate Charge Total (10 V)
120
nC
Qgd
Gate Charge Gate to Drain
20
RDS(on)
Drain-to-Source On Resistance
VGS(th)
Threshold Voltage
nC
VGS = 6 V
2.2
mΩ
VGS = 10 V
2.0
mΩ
2.5
V
Ordering Information(1)
2 Applications
•
•
UNIT
VDS
Secondary Side Synchronous Rectifier
Motor Control
DEVICE
QTY
MEDIA
PACKAGE
SHIP
CSD19506KTT
500
CSD19506KTTT
50
13-Inch
Reel
D2PAK Plastic Package
Tape &
Reel
3 Description
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
This 80-V, 2.0-mΩ, D2PAK (TO-263) NexFET™
power MOSFET is designed to minimize losses in
power conversion applications.
TA = 25°C
VALUE
UNIT
SPACE
VDS
Drain-to-Source Voltage
80
V
VGS
Gate-to-Source Voltage
±20
V
Continuous Drain Current (Package limited)
200
Continuous Drain Current (Silicon limited),
TC = 25°C
291
Continuous Drain Current (Silicon limited),
TC = 100°C
206
IDM
Pulsed Drain Current (1)
400
A
PD
Power Dissipation
375
W
TJ,
Tstg
Operating Junction and
Storage Temperature Range
–55 to 175
°C
EAS
Avalanche Energy, single pulse
ID = 129 A, L = 0.1 mH, RG = 25 Ω
832
mJ
Drain (Pin 2)
Absolute Maximum Ratings
ID
Gate
(Pin 1)
Source (Pin 3)
.
A
(1) Max RθJC = 0.4°C/W, pulse duration ≤100 μs, duty cycle ≤1%
RDS(on) vs VGS
Gate Charge
10
TC = 25° C, I D = 100 A
TC = 125° C, I D = 100 A
9
VGS - Gate-to-Source Voltage (V)
RDS(on) - On-State Resistance (m:)
10
8
7
6
5
4
3
2
1
ID = 100 A
9 VDS = 40 V
8
7
6
5
4
3
2
1
0
0
0
2
4
6
8
10
12
14
16
VGS - Gate-to-Source Voltage (V)
18
20
D007
0
20
40
60
80
100
Qg - Gate Charge (nC)
120
140
D004
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
CSD19506KTT
SLPS586 – MARCH 2016
www.ti.com
Table of Contents
1
2
3
4
5
Features ..................................................................
Applications ...........................................................
Description .............................................................
Revision History.....................................................
Specifications.........................................................
6.1
6.2
6.3
6.4
1
1
1
2
3
7
5.1 Electrical Characteristics........................................... 3
5.2 Thermal Information .................................................. 3
5.3 Typical MOSFET Characteristics.............................. 4
6
Community Resources..............................................
Trademarks ...............................................................
Electrostatic Discharge Caution ................................
Glossary ....................................................................
7
7
7
7
Mechanical, Packaging, and Orderable
Information ............................................................. 8
7.1 KTT Package Dimensions ........................................ 8
7.2 Recommended PCB Pattern..................................... 9
7.3 Recommended Stencil Opening (0.125 mm Stencil
Thickness).................................................................. 9
Device and Documentation Support.................... 7
4 Revision History
2
DATE
REVISION
NOTES
March 2016
*
Initial release.
Submit Documentation Feedback
Copyright © 2016, Texas Instruments Incorporated
Product Folder Links: CSD19506KTT
CSD19506KTT
www.ti.com
SLPS586 – MARCH 2016
5 Specifications
5.1 Electrical Characteristics
(TA = 25°C unless otherwise stated)
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX
UNIT
STATIC CHARACTERISTICS
BVDSS
Drain-to-source voltage
VGS = 0 V, ID = 250 μA
IDSS
Drain-to-source leakage current
VGS = 0 V, VDS = 64 V
1
μA
IGSS
Gate-to-source leakage current
VDS = 0 V, VGS = 20 V
100
nA
VGS(th)
Gate-to-source threshold voltage
VDS = VGS, ID = 250 μA
RDS(on)
Drain-to-source on-resistance
gfs
Transconductance
80
2.1
V
2.5
3.2
V
VGS = 6 V, ID = 100 A
2.2
2.8
mΩ
VGS = 10 V, ID = 100 A
2.0
2.3
mΩ
VDS = 8 V, ID = 100 A
297
S
DYNAMIC CHARACTERISTICS
Ciss
Input capacitance
Coss
Output capacitance
Crss
Reverse transfer capacitance
RG
Series gate resistance
Qg
Gate charge total (10 V)
120
Qgd
Gate charge gate-to-drain
Qgs
Gate charge gate-to-source
Qg(th)
Gate charge at Vth
Qoss
Output charge
td(on)
Turn on delay time
tr
Rise time
td(off)
Turn off delay time
tf
Fall time
VGS = 0 V, VDS = 40 V, ƒ = 1 MHz
VDS = 40 V, ID = 100 A
VDS = 40 V, VGS = 0 V
VDS = 40 V, VGS = 10 V,
IDS = 100 A, RG = 0 Ω
9380
12200
pF
2260
2940
pF
42
55
pF
1.3
2.6
Ω
156
nC
20
nC
37
nC
25
nC
345
nC
14
ns
7
ns
30
ns
5
ns
DIODE CHARACTERISTICS
VSD
Diode forward voltage
ISD = 100 A, VGS = 0 V
0.9
1.1
V
Qrr
Reverse recovery charge
nC
Reverse recovery time
VDS= 40 V, IF = 100 A,
di/dt = 300 A/μs
525
trr
107
ns
5.2 Thermal Information
(TA = 25°C unless otherwise stated)
MAX
UNIT
RθJC
Junction-to-case thermal resistance
THERMAL METRIC
MIN
TYP
0.4
°C/W
RθJA
Junction-to-ambient thermal resistance
62
°C/W
Submit Documentation Feedback
Copyright © 2016, Texas Instruments Incorporated
Product Folder Links: CSD19506KTT
3
CSD19506KTT
SLPS586 – MARCH 2016
www.ti.com
5.3 Typical MOSFET Characteristics
(TA = 25°C unless otherwise stated)
200
200
175
175
IDS - Drain-to-Source Current (A)
IDS - Drain-to-Source Current (A)
Figure 1. Transient Thermal Impedance
150
125
100
75
50
VGS = 6 V
VGS = 8 V
VGS = 10 V
25
TC = 125° C
TC = 25° C
TC = -55° C
150
125
100
75
50
25
0
0
0
0.1
0.2
0.3
0.4
VDS - Drain-to-Source Voltage (V)
0.5
1
D002
2
3
4
5
VGS - Gate-to-Source Voltage (V)
6
7
D003
VDS = 5 V
Figure 2. Saturation Characteristics
4
Submit Documentation Feedback
Figure 3. Transfer Characteristics
Copyright © 2016, Texas Instruments Incorporated
Product Folder Links: CSD19506KTT
CSD19506KTT
www.ti.com
SLPS586 – MARCH 2016
Typical MOSFET Characteristics (continued)
(TA = 25°C unless otherwise stated)
100000
9
10000
8
C - Capacitance (pF)
VGS - Gate-to-Source Voltage (V)
10
7
6
5
4
3
1000
100
10
2
Ciss = Cgd + Cgs
Coss = Cds + Cgd
Crss = Cgd
1
1
0
0
20
40
60
80
100
Qg - Gate Charge (nC)
VDS = 40 V
120
0
140
10
20
30
40
50
60
VDS - Drain-to-Source Voltage (V)
D004
D005
Figure 5. Capacitance
3.1
10
2.9
9
RDS(on) - On-State Resistance (m:)
VGS(th) - Threshold Voltage (V)
80
ID = 100 A
Figure 4. Gate Charge
2.7
2.5
2.3
2.1
1.9
1.7
1.5
1.3
1.1
-75
70
TC = 25° C, I D = 100 A
TC = 125° C, I D = 100 A
8
7
6
5
4
3
2
1
0
-50
-25
0
0
25 50 75 100 125 150 175 200
TC - Case Temperature (° C)
D006
2
4
6
8
10
12
14
16
VGS - Gate-to-Source Voltage (V)
18
20
D007
ID = 250 µA
Figure 6. Threshold Voltage vs Temperature
Figure 7. On-State Resistance vs Gate-To-Source Voltage
100
2.2
VGS = 6 V
VGS = 10 V
ISD - Source-to-Drain Current (A)
Normalized On-State Resistance
2.4
2
1.8
1.6
1.4
1.2
1
0.8
TC = 25° C
TC = 125° C
10
1
0.1
0.01
0.001
0.6
0.4
-75
0.0001
-50
-25
0
25 50 75 100 125 150 175 200
TC - Case Temperature (° C)
D008
0
0.2
0.4
0.6
0.8
VSD - Source-to-Drain Voltage (V)
1
D009
ID = 60 A
Figure 8. Normalized On-State Resistance vs Temperature
Figure 9. Typical Diode Forward Voltage
Submit Documentation Feedback
Copyright © 2016, Texas Instruments Incorporated
Product Folder Links: CSD19506KTT
5
CSD19506KTT
SLPS586 – MARCH 2016
www.ti.com
Typical MOSFET Characteristics (continued)
(TA = 25°C unless otherwise stated)
500
IAV - Peak Avalanche Current (A)
IDS - Drain-to-Source Current (A)
1000
100
10
1
DC
10 ms
0.1
0.1
1 ms
100 µs
1
10
VDS - Drain-to-Source Voltage (V)
100
TC = 25qC
TC = 125qC
100
10
0.01
0.1
TAV - Time in Avalanche (ms)
D010
1
D011
Single Pulse, Max RθJC = 0.4°C/W
Figure 10. Maximum Safe Operating Area
Figure 11. Single Pulse Unclamped Inductive Switching
IDS - Drain-to-Source Current (A)
225
200
175
150
125
100
75
50
25
0
-50
-25
0
25
50
75 100 125
TC - Case Temperature (° C)
150
175
200
D012
Figure 12. Maximum Drain Current vs Temperature
6
Submit Documentation Feedback
Copyright © 2016, Texas Instruments Incorporated
Product Folder Links: CSD19506KTT
CSD19506KTT
www.ti.com
SLPS586 – MARCH 2016
6 Device and Documentation Support
6.1 Community Resources
The following links connect to TI community resources. Linked contents are provided "AS IS" by the respective
contributors. They do not constitute TI specifications and do not necessarily reflect TI's views; see TI's Terms of
Use.
TI E2E™ Online Community TI's Engineer-to-Engineer (E2E) Community. Created to foster collaboration
among engineers. At e2e.ti.com, you can ask questions, share knowledge, explore ideas and help
solve problems with fellow engineers.
Design Support TI's Design Support Quickly find helpful E2E forums along with design support tools and
contact information for technical support.
6.2 Trademarks
NexFET, E2E are trademarks of Texas Instruments.
All other trademarks are the property of their respective owners.
6.3 Electrostatic Discharge Caution
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
6.4 Glossary
SLYZ022 — TI Glossary.
This glossary lists and explains terms, acronyms, and definitions.
Submit Documentation Feedback
Copyright © 2016, Texas Instruments Incorporated
Product Folder Links: CSD19506KTT
7
CSD19506KTT
SLPS586 – MARCH 2016
www.ti.com
7 Mechanical, Packaging, and Orderable Information
The following pages include mechanical, packaging, and orderable information. This information is the most
current data available for the designated devices. This data is subject to change without notice and revision of
this document. For browser-based versions of this data sheet, refer to the left-hand navigation.
7.1 KTT Package Dimensions
15.5
14.7
9.25
9.05
A
B
3
10.26
10.06
2X 5.08
2
1
2[.0]X 1.36
1.23
2[.0]X 0.9
0.77
1.75 MAX
0.25
C A
B
1.4
1.17
0.47
0.34
C
4.7
4.4
8
0
0.25
0
1.32
1.22
2.6
2
0.25
GAGE PLANE
7.48
7.08
8°
0°
8.55
8.15
0.25
GAGE PLANE
NOTE 3
2.6
2
OPTIONAL LEAD FORM
EXPOSED
THERMAL PAD
Notes:
1. All linear dimensions are in millimeters. Any dimensions in parenthesis are for reference only. Dimensioning
and tolerancing per ASME Y14.5M.
2. This drawing is subject to change without notice.
3. Features may not exist and shape may vary per different assembly sites.
Pin Configuration
POSITION
8
DESIGNATION
Pin 1
Gate
Pin 2 / Tab
Drain
Pin 3
Source
Submit Documentation Feedback
Copyright © 2016, Texas Instruments Incorporated
Product Folder Links: CSD19506KTT
CSD19506KTT
www.ti.com
SLPS586 – MARCH 2016
7.2 Recommended PCB Pattern
PKG
(3.4)
(6.9)
(R0.05) TYP
PKG
SYMM
(5.08)
(8.55)
2X (1.05)
2X (3.82)
(7.48)
0.07 MAX
ALL AROUND
SOLDER MASK
OPENING
0.07 MIN
ALL AROUND
METAL
SOLDER MASK
OPENING
METAL UNDER
SOLDER MASK
SOLDER MASK
DEFINED
NON SOLDER MASK
DEFINED
For recommended circuit layout for PCB designs, see application note SLPA005 – Reducing Ringing Through
PCB Layout Techniques.
7.3 Recommended Stencil Opening (0.125 mm Stencil Thickness)
(1.17) TYP
42X (0.97)
(0.48) TYP
2X (3.82)
2X (1.05)
42X (0.95)
(R0.05) TYP
(1.15) TYP
SYMM
(5.08)
(6.9)
PKG
Notes:
1. This package is designed to be soldered to a thermal pad on the board. See application notes, PowerPAD
Thermally Enhanced Package (SLMA002)
and PowerPAD
Made Easy (SLMA004) for more information.
2. Laser cutting apertures with trapezoidal walls and rounded corners may offer better paste release. IPC-7525
may have alternate design recommendations.
3. Board assembly site may have different recommendations for stencil design.
Submit Documentation Feedback
Copyright © 2016, Texas Instruments Incorporated
Product Folder Links: CSD19506KTT
9
PACKAGE OPTION ADDENDUM
www.ti.com
21-Mar-2016
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
MSL Peak Temp
(2)
(6)
(3)
Op Temp (°C)
Device Marking
(4/5)
CSD19506KTT
ACTIVE
DDPAK/
TO-263
KTT
3
500
Pb-Free (RoHS
Exempt)
CU SN
Level-2-260C-1 YEAR
-55 to 175
CSD19506KTTT
ACTIVE
DDPAK/
TO-263
KTT
3
50
TBD
Call TI
Call TI
-55 to 175
CSD19506KTT
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3)
MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4)
There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5)
Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
(6)
Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish
value exceeds the maximum column width.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
Addendum-Page 1
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
21-Mar-2016
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products
Applications
Audio
www.ti.com/audio
Automotive and Transportation
www.ti.com/automotive
Amplifiers
amplifier.ti.com
Communications and Telecom
www.ti.com/communications
Data Converters
dataconverter.ti.com
Computers and Peripherals
www.ti.com/computers
DLP® Products
www.dlp.com
Consumer Electronics
www.ti.com/consumer-apps
DSP
dsp.ti.com
Energy and Lighting
www.ti.com/energy
Clocks and Timers
www.ti.com/clocks
Industrial
www.ti.com/industrial
Interface
interface.ti.com
Medical
www.ti.com/medical
Logic
logic.ti.com
Security
www.ti.com/security
Power Mgmt
power.ti.com
Space, Avionics and Defense
www.ti.com/space-avionics-defense
Microcontrollers
microcontroller.ti.com
Video and Imaging
www.ti.com/video
RFID
www.ti-rfid.com
OMAP Applications Processors
www.ti.com/omap
TI E2E Community
e2e.ti.com
Wireless Connectivity
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2016, Texas Instruments Incorporated
Similar pages