High Pass Filter 50Ω HFCV-145+ 140 to 1150 MHz The Big Deal: CASE STYLE: JV1210C • Small size 3.2mm x 2.5 mm • High Power handling (8W) • High rejection (20 dB typ) • Ceramic construction Product Overview: New High Pass Filter HFCV-145+ is an LTCC based 7 section design, that extends the lower frequency cutoff range of the existing HFCN series to 145 MHz. Systems that previously relied on active or lumped element filtering to support these lower frequencies can save power and system complexity by integrating the HFCV-145+ into new designs. These filters are offered in a EIA 1210 package size and have a typical stop band rejection of 20 dB. Summary Performance Insertion Loss (Pass band) 1.5 dB Max. 155-1050 MHz Return Loss (Pass band) 15 dB Typ. 155-1050 MHz Stop band Rejection 15 dB Min. 115 MHz Stop band Rejection 20 dB typ. 80 MHz Key Features Feature Advantages Small Size (3.2mm x2.5 mm) Available in the size of typical resistors or capacitors (EIA 1210), the ultra small HFCV series integrates up to 7 low pass sections in a simple SMT chip form factor. High Power Handling The HFCV series can withstand up to 8W CW signal without damage making this filter ideal for use in medium power to transmit paths. Temperature Stability Over a 155°C operating temperature range (-55°C to +100°C), the HFCV series ceramic filters typically exhibit less than 0.2 dB pass band insertion loss variation. High Rejection Achieving 20dB rejection @80 MHz; the HFCV-145+ provides a versatile high pass configuration for many up converter applications. Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 1 of 2 Ceramic High Pass Filter 50Ω HFCV-145+ 140 to 1150 MHz Operating Temperature -55°C to 100°C Storage Temperature -55°C to 100°C RF Power Input* CASE STYLE: JV1210C Features Maximum Ratings 8.5W max. at 25°C * Passband rating, derate linearly to 3.5W at 100°C ambient. Permanent damage may occur if any of these limits are exceeded. Pin Connections RF IN 1 RF OUT 3 GROUND 2,4 • low cost • small size • 7 sections • temperature stable • dc block in/out, breakdown voltage, 1kV typ. • excellent power handling, 8.5W • hermetically sealed • sub-harmonic rejection and dc blocking • transmitters/receivers • lab use Electrical F# Specifications1 at 25°C Frequency (MHz) Min. DC-F1 DC-80 Rejection Loss DC-F2 DC-115 Stop Band Freq. Cut-Off F3 132 VSWR DC-F2 DC-115 F5-F6 155-1050 Insertion Loss Pass Band F4-F7 140-1150 VSWR F5-F7 155-1150 1.Measured on Mini-Circuits Characterization Test Board TB-526+. ATTENUATION (dB) Typ. Max. Unit 20 15 dB dB dB :1 dB dB :1 3.0 20 1.5 3.0 1.5 Typical Frequency Response PCB Land Pattern and Reel Available Tape cost at no extra Devices/Reel 20, 50, 100, 200, 500,1000, 3000 Reel Size 7” Applications Parameter Outline Drawing +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Electrical Schematic R F IN 40 R F OUT 20 3 2 1.3 DC F1 F2 F3 F4 F5 F6 F7 FREQUENCY Typical Performance Data at 25°C Suggested Layout, Tolerance to be within ±.002 Frequency (MHz) Outline Dimensions ( inch mm ) A .126 3.20 B .098 2.49 C .059 1.50 D .012 0.30 E .024 0.61 F .016 0.41 G .209 5.31 J .128 3.25 K .175 4.45 L .057 1.45 M .059 1.50 N .059 1.50 P .028 0.71 Q wt .020 grams 0.51 .03 Insertion Loss (dB) VSWR (:1) 54.15 23.83 21.45 0.52 0.42 0.34 0.34 0.37 0.42 0.52 0.69 1.00 1.09 1.24 1.55 354.02 154.04 26.11 1.27 1.39 1.25 1.22 1.23 1.28 1.39 1.58 1.90 1.99 2.14 2.45 1.0 50.0 100.0 200.0 300.0 500.0 600.0 700.0 800.0 900.0 1000.0 1100.0 1120.0 1150.0 1200.0 H .091 2.31 Demo Board MCL P/N: TB-526+ Suggested PCB Layout (PL-307) HFCV-145+ INSERTION LOSS HFCV-145+ VSWR 10000 50 40 VSWR INSERTION LOSS (dB) 60 30 100 20 10 0 1 0 200 400 600 800 1000 1200 FREQUENCY (MHz) 0 200 400 600 800 1000 1200 FREQUENCY (MHz) Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] REV. C M151107 HFCV-145+ AD/CP/AM 150803 Page 2 of 2