MGA-43024 2.4 GHz WLAN Power Amplifier Module Data Sheet Description Features Avago Technologies’ MGA-43024 is a fully matched power amplifier for use in the WLAN band (2401- 2484 MHz). High linear output power at 5.0 V is achieved through the use of Avago’s proprietary 0.25 µm GaAs Enhancement-mode pHEMT process. MGA-43024 is housed in a miniature 5.0 mm × 5.0 mm molded-chip-on-board (MCOB) module package. A detector is also included on-chip. The compact footprint coupled with high gain, high linearity and good efficiency makes the MGA-43024 an ideal choice as a power amplifier for small cell enterprise WLAN PA applications. • Linear Pout @ EVM =2.5% (802.11n): 27.8 dBm • High gain : 40.5 dB • Fully matched input and output ports • Built-in detector • GaAs E-pHEMT Technology [1] • MSL3 (5.0 × 5.0 × 0.82) mm Package Outline • Lead-free/Halogen-free/RoHS compliance Notes: Package marking provides orientation and identification ”43024” = Device part number ”YYWW” = Year and work week ”XXXX” = Assembly lot number 43024 YYWW XXXX • Linear Pout with Restricted Band Emission (802.11n) of -48 dBm @ 2462 MHz: 22.2 dBm • Low-cost small package size: (5.0 × 5.0 × 0.82) mm Component Image AVAGO • Linear Pout with Restricted Band Emission (802.11n) of -48 dBm @ 2412 MHz: 22.2 dBm Note: 1. Enhancement mode technology employs positive VGS, and so eliminates the need for negative gate voltage associated with conventional depletion mode devices. Applications • Enterprise WLAN access points • Small cell with embedded WLAN TOP VIEW Vdd3 Vdd3 23 22 Gnd 24 Vdd3 25 26 Vdd2 27 Gnd 28 Vdd1 Pin Configuration Gnd 1 21 Gnd Gnd 2 20 Gnd NC 3 19 RFout RFin 4 18 RFout NC 17 RFout 5 Functional Block Diagram Vdd1 Vdd2 Vdd3 16 Gnd Gnd 6 (5.0 × 5.0 × 0.82) mm 7 15 Gnd Top View Gnd 13 Vdet 14 VddBias 12 11 Vc3 10 Gnd 9 Vc2 8 RFin Vc1 NC Attention: Observe precautions for handling electrostatic-sensitive devices. ESD Machine Model = 60 V ESD Human Body Model = 400 V Refer to Avago Application Note A004R: Electrostatic Discharge, Damage and Control. 1st Stage 2nd Stage 3rd Stage Biasing Circuit Vc1 Vc2 Vc3 VddBias Vdet RFout Thermal Resistance [2,3] Absolute Maximum Rating [1] TA = 25 °C Symbol Parameter Units Absolute Max. qJC = 13 °C/W Vdd, VddBias Supply voltages, bias supply voltage V 5.5 Vc Control voltage V (Vdd) Pin,max CW RF Input Power dBm 20 Pdiss Total Power Dissipation [3] W 6.0 Tj Junction Temperature °C 150 TSTG Storage Temperature °C -65 to 150 Notes: 1. Operation of this device in excess of any of these limits may cause permanent damage. 2. Thermal resistance measured using InfraRed Measurement Technique. 3. Board temperature (TC) is 25 °C , for TC > 72 °C derate the device power at 77 mW per °C rise in board (package belly) temperature. Electrical Specifications TA = 25 °C, Vdd = Vddbias=5.0 V, Vc1=2.0 V, Vc2=2.2 V, Vc3=2.0 V, RF performance at 2442 MHz, IEEE 802.11n 64-QAM, 20 MHz Bandwidth, MCS 7, 800 ns Guard Interval, unless otherwise stated. Symbol Parameter and Test Condition Units Vdd Supply Voltage V Idq Quiescent Supply Current mA 250 480 650 Iddtotal Total Supply Current at linear output 21 dBm (2412 MHz) mA 400 540 800 Total Supply Current at linear output 21 dBm (2462 MHz) mA 400 550 800 Total Supply Current at linear output 27 dBm mA 700 S21 Small Signal Gain dB 40.5 |S11| Input Return Loss, 50 Ω source dB 12.5 |S22| Output Return Loss, 50 Ω source dB 13.5 OP1dB Output Power at 1 dB Gain Compression dBm 36 PAE Power Added Efficiency at linear output 21 dBm (2412 MHz) % 4.4 Power Added Efficiency at linear output 21 dBm (2462 MHz) % 5.2 Power Added Efficiency at linear output 27 dBm % 14.8 2fo 2nd Harmonic Distortion at 27 dBm dBc -34.6 3fo 3rd Harmonic Distortion at 27 dBm dBc -53.3 Linear Pout Restricted Band Emission (RBE) @ 21 dBm at 2390 MHz (2412 MHz) 2 Min. Typ. Max. 5.0 dBm -50.5 -48 Restricted Band Emission (RBE) @ 21 dBm at 2483.5 MHz (2462 MHz) dBm -50.5 -48 Error Vector Magnitude at 2.5% 27.8 dBm Product Consistency Distribution Charts [1] Figure 1. Idq Figure 2. Idd total @ 21 dBm at 2412 MHz Figure 3. Idd total @ 21 dBm at 2462 MHz Figure 4. RBE @ 21 dBm at 2390 MHz Figure 5. RBE @ 21 dBm at 2483.5 MHz Note: 1. Distribution data sample size is 1200 samples taken from three wafer lots. TA = 25 °C, Vdd = VddBias = 5.0 V, Vc1 = 2.0 V, Vc2 = 2.2 V, Vc3 = 2.0 V, RF input at 2412 MHz and 2462 MHz, unless otherwise stated. Future wafers allocated to this product may have nominal values anywhere between the upper and lower limits. 3 MGA-43024 typical small-signal over-temperature performance at Vc1 = 2.0 V, Vc2 = 2.2 V, Vc3 = 2.0 V (Vdd = VddBias = 5.0 V) as per demonstration board in Figure 28, unless otherwise stated. 0 25 °C 6- – 40 °C 9- 85 °C -12 -15 -18 -21 -24 2.2 2.3 2.4 2.5 2.6 2.7 Frequency (GHz) 2.8 2.9 3 Figure 6. Over-temperature S11 vs. Frequency 41 S21 (dB) 38 35 32 29 25 °C 26 – 40 °C 23 85 °C 2.3 2.4 2.5 2.6 2.7 Frequency (GHz) Figure 8. Over-temperature S21 vs. Frequency 4 – 40 °C 85 °C 2.3 2.4 2.5 2.6 2.7 Frequency (GHz) Figure 7. Over-temperature S22 vs. Frequency 44 20 2.2 25 °C S22 (dB) S11 (dB) 3- 0 -3 -6 -9 -12 -15 -18 -21 -24 -27 -30 2.2 2.8 2.9 3 2.8 2.9 3 -20 -24 -28 -32 -36 -40 -44 -48 -52 -56 -60 25°C – 40°C RBE (dBm) at 2483.5 MHz RBE (dBm) at 2390 MHz MGA-43024 typical over-temperature performance at Vc1 = 2.0 V, Vc2 = 2.2 V, Vc3 = 2.0 V (Vdd = VddBias = 5.0 V) with IEEE 802.11n 64-QAM, 20 MHz Bandwidth, MCS 7, 800 ns Guard Interval as per demonstration board in Figure 28, unless otherwise stated. 85°C 18 19 20 21 22 23 24 25 2412 MHz Pout (dBm) 26 27 28 29 Figure 9. Over-temperature RBE at 2390 MHz vs. 2412 MHz Pout -20 -24 -28 -32 -36 -40 -44 -48 -52 -56 -60 18 19 20 21 -40 -40 25°C -44 –40°C -44 – 40°C -48 85°C -48 85°C -52 -56 -60 -68 22 23 24 25 2462 MHz Pout (dBm) 26 27 28 29 28 29 28 29 -36 RBE (dBm) at 2483.5 MHz RBE (dBm) at 2390 MHz 85°C 25°C -52 -56 -60 -64 -64 18 19 20 21 22 23 24 25 2442 MHz Pout (dBm) 26 27 28 19 20 25°C – 40°C 85°C 19 20 21 22 23 24 Pout (dBm) 25 Figure13. Over-temperature EVM vs. Pout at 2412 MHz 26 27 21 22 23 24 25 2442 MHz Pout (dBm) 26 27 Figure 12. Over-temperature RBE at 2483.5 MHz vs. 2442 MHz Pout 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 18 25°C – 40°C 85°C EVM (%) 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 18 -68 18 29 Figure 11. Over-temperature RBE at 2390 MHz vs. 2442 MHz Pout EVM (%) – 40°C Figure 10. Over-temperature RBE at 2483.5 MHz vs. 2462 MHz Pout -36 5 25°C 28 29 19 20 21 22 23 24 Pout (dBm) 25 Figure 14. Over-temperature EVM vs. Pout at 2442 MHz 26 27 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 18 21 25°C – 40°C 85°C PAE (%) EVM (%) MGA-43024 typical over-temperature performance at Vc1 = 2.0 V, Vc2 = 2.2 V, Vc3 = 2.0 V (Vdd = VddBias = 5.0 V) with IEEE 802.11n 64-QAM, 20 MHz Bandwidth, MCS 7, 800 ns Guard Interval as per demonstration board in Figure 28, unless otherwise stated. (con't) 18 25°C 15 – 40°C 3 19 20 21 22 23 24 Pout (dBm) 25 26 27 28 0 29 25°C 0.75 – 40°C 0.70 85°C Vdet(V) Itotal (A) 0.80 0.65 0.60 0.55 0.50 19 20 21 22 23 24 25 Pout (dBm) 26 27 28 29 Figure 17. Over-temperature Itotal vs. Pout at 2442 MHz -33 – 40°C -36 85°C -38 -39 -40 22 23 24 Pout (dBm) 25 26 27 28 29 25°C -54 – 40°C -55 85°C -56 -57 -58 -59 -41 19 20 21 22 23 24 Pout (dBm) 25 26 27 Figure19. Over-temperature 2nd Harmonic vs. Pout at 2442 MHz 6 21 2.0 1.8 25°C 1.6 –40°C 1.4 85°C 1.2 1.0 0.8 0.6 0.4 0.2 0.0 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 Pout (dBm) -53 -37 -42 18 20 -52 3rd Harmonic (dBc) 2nd Harmonic (dBc) -35 19 Figure 18. Over-temperature Vdet vs. Pout at 2442 MHz 25°C -34 18 Figure 16. Over-temperature PAE vs. Pout at 2442 MHz 0.85 18 9 6 Figure 15. Over-temperature EVM vs. Pout at 2462 MHz 0.45 85°C 12 28 29 -60 18 19 20 21 22 23 24 Pout (dBm) 25 26 27 Figure 20. Over-temperature 3rd Harmonic vs. Pout at 2442 MHz 28 29 1.8 Gain 1.5 1.2 Itotal 25°C – 40 °C 85°C 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 Pout (dBm) 0.9 0.6 0.3 42.5 42.0 41.5 41.0 40.5 40.0 39.5 39.0 38.5 38.0 37.5 37.0 36.5 2.1 Gain 1.2 0.9 25°C 0.6 –40°C 85°C 0.3 24 25 26 27 28 29 30 31 32 33 34 35 36 37 Pout (dBm) Figure 23. Over-temperature CW Gain, Itotal vs. Pout at 2462 MHz 7 1.8 1.5 Itotal 2.1 1.8 Gain 1.5 1.2 Itotal 25°C – 40°C 85°C 0.9 0.6 0.3 24 25 26 27 28 29 30 31 32 33 34 35 36 37 Pout (dBm) Figure 22. Over-temperature CW Gain, Itotal vs. Pout at 2442 MHz Itotal (A) Gain (dB) Figure 21. Over-temperature CW Gain, Itotal vs. Pout at 2412 MHz 42.5 42.0 41.5 41.0 40.5 40.0 39.5 39.0 38.5 38.0 37.5 37.0 36.5 Itotal (A) 2.1 Gain (dB) 42.0 41.5 41.0 40.5 40.0 39.5 39.0 38.5 38.0 37.5 37.0 36.5 36.0 Itotal (A) Gain (dB) MGA-43024 typical over-temperature performance at Vc1 = 2.0 V, Vc2 = 2.2 V, Vc3 = 2.0 V (Vdd = VddBias = 5.0 V) with IEEE 802.11n 64-QAM, 20 MHz Bandwidth, MCS 7, 800 ns Guard Interval as per demonstration board in Figure 28, unless otherwise stated. (con't) MGA-43024 typical over-temperature performance at Vc1 = 2.0 V, Vc2 = 2.2 V, Vc3 = 2.0 V (Vdd = VddBias = 5.0 V) with IEEE 802.11n 64-QAM, 20 MHz Bandwidth, MCS 7, 800 ns Guard Interval as per demonstration board in Figure 28, unless otherwise stated. (con't) Spectrum Emission Mask (SEM) with 802.11n IEEE 20.3.21.1 signal 20 10 25°C 0 0 85°C SEM Limit -20 85°C SEM Limit -10 -20 -30 -30 -40 -40 -50 -50 -60 – 40°C Power (dB) Power (dB) -10 25°C 10 – 40°C -50 -40 -30 -20 -10 0 10 20 Frequency Offset (MHz) Figure 24. Over-temperature SEM 22 dBm at 2442 MHz 30 40 -60 -50 50 -40 -30 -20 -10 0 10 20 Frequency Offset (MHz) 30 40 50 Figure 25. Over-temperature SEM 29.5 dBm at 2442 MHz Spectrum Emission Mask (SEM) with 802.11b IEEE 18.4.7.3 signal 20 10 0 Power (dB) -10 -20 -30 -40 0 85°C SEM Limit -10 -20 -30 -50 -40 -30 -20 -10 0 10 20 Frequency Offset (MHz) Figure 26. Over-temperature SEM 22 dBm at 2442 MHz 8 – 40°C -40 -50 -60 -50 25°C 10 Power (dB) 25°C – 40°C 85°C SEM Limit 30 40 50 -60 -50 -40 -30 -20 -10 0 10 20 Frequency Offset (MHz) Figure 27. Over-temperature SEM 32.5 dBm at 2442 MHz 30 40 50 S-Parameter [1] (Vdd = VddBias = 5.0 V, Vc1 = 2.0 V, Vc2 = 2.2 V, Vc3=2.0 V), T = 25 °C, 50 Ω matched) Freq (GHz) S11 (dB) S11 (ang) S21 (dB) S21 (ang) S22 (dB) S22 (ang) S12 (dB) S12 (ang) 0.1 -5.43 176.76 -53.24 -88.81 -0.35 175.70 -55.49 -40.22 0.2 -5.36 173.07 -54.47 -115.45 -0.90 175.67 -68.49 173.95 0.3 -5.30 169.21 -53.63 -95.98 -0.87 176.21 -68.75 74.73 0.4 -5.29 165.81 -47.86 -74.48 -0.82 175.63 -72.13 87.45 0.5 -5.20 162.13 -34.01 -56.47 -0.79 174.68 -64.83 166.52 0.6 -5.08 158.00 -20.91 -68.36 -0.79 173.62 -68.99 126.29 0.7 -4.87 152.79 -7.81 -90.34 -0.79 172.43 -73.39 -177.74 0.8 -5.16 142.97 5.89 -147.07 -0.83 171.13 -64.77 105.00 0.9 -6.34 145.60 10.27 126.75 -0.93 170.07 -72.97 83.31 1.0 -5.89 144.39 11.56 86.97 -1.03 169.11 -67.77 105.38 1.1 -5.65 139.58 14.46 57.00 -1.17 168.08 -73.61 -150.63 1.2 -5.46 134.64 17.86 28.58 -1.29 167.77 -66.13 72.40 1.3 -5.39 128.40 21.93 -10.53 -1.33 168.28 -64.35 50.60 1.4 -5.76 121.38 24.07 -63.05 -1.08 168.89 -61.70 49.67 1.5 -6.23 117.87 20.76 -118.28 -0.61 166.91 -66.18 86.15 1.6 -6.11 111.71 10.72 -109.65 -0.31 161.86 -67.45 97.68 1.7 -7.19 102.91 23.12 -64.44 -0.56 156.24 -65.86 49.22 1.8 -7.10 95.38 25.31 -93.41 -0.63 149.63 -68.46 123.55 1.9 -7.97 80.76 32.19 -122.72 -1.57 140.08 -58.51 132.79 2.0 -10.91 58.32 36.61 -168.72 -3.66 131.53 -55.78 120.35 2.1 -19.36 44.90 38.41 136.31 -6.80 137.06 -52.15 89.68 2.2 -19.46 138.15 35.98 94.50 -8.67 141.81 -52.13 70.07 2.3 -15.29 106.72 35.86 78.48 -11.34 169.74 -52.58 63.29 2.4 -16.07 79.03 39.34 46.47 -8.73 175.99 -51.07 41.07 2.5 -19.02 -25.52 41.45 -7.88 -16.09 -170.53 -50.49 27.04 2.6 -11.83 -140.97 39.25 -73.99 -4.92 -118.16 -52.22 -12.46 2.7 -10.24 175.54 33.98 -117.30 -1.66 -141.22 -55.28 -20.79 2.8 -10.21 155.09 29.17 -144.19 -0.83 -153.69 -59.07 -30.68 2.9 -10.50 142.75 25.03 -164.15 -0.51 -161.35 -61.28 -12.99 3.0 -10.85 134.44 21.39 179.45 -0.34 -166.63 -66.56 -20.94 3.1 -11.16 128.08 18.08 165.18 -0.24 -170.63 -68.65 -7.15 3.2 -11.41 122.97 15.01 152.30 -0.17 -173.96 -65.97 -30.47 3.3 -11.61 118.30 12.08 140.39 -0.12 -176.87 -68.77 -34.57 3.4 -11.79 114.24 9.23 129.41 -0.09 -179.41 -69.24 10.34 3.5 -11.92 110.58 6.41 119.09 -0.06 178.23 -73.82 -47.03 3.6 -12.02 107.96 3.54 109.20 -0.05 175.97 -71.58 43.92 3.7 -11.95 105.87 0.51 99.81 -0.03 173.81 -69.40 74.30 3.8 -11.79 104.01 -2.86 91.20 -0.02 171.81 -66.46 62.70 3.9 -11.59 102.15 -6.85 83.86 -0.02 169.83 -69.21 67.60 4.0 -11.37 100.63 -12.19 80.44 -0.02 167.90 -62.92 47.56 4.1 -11.11 99.47 -20.71 98.79 -0.02 166.01 -67.18 65.14 4.2 -10.84 98.82 -20.34 -179.04 -0.02 164.11 -61.86 82.30 4.3 -10.52 99.14 -14.53 -169.00 -0.03 162.24 -64.22 80.70 4.4 -10.14 100.31 -12.21 -175.37 -0.05 160.41 -61.42 79.01 4.5 -9.52 102.50 -12.70 -177.29 -0.07 158.59 -60.52 56.17 4.6 -8.44 104.22 -10.56 -139.72 -0.11 156.86 -58.52 56.27 4.7 -7.06 101.06 -1.32 -155.54 -0.16 155.25 -59.69 45.05 4.8 -6.43 94.30 1.80 157.65 -0.20 153.90 -56.95 47.96 4.9 -6.34 89.68 1.32 119.72 -0.21 152.60 -58.92 37.03 9 S-Parameter [1] (Vdd = VddBias = 5.0 V, Vc1 = 2.0 V, Vc2 = 2.2 V, Vc3=2.0 V), T = 25 °C, 50 Ω matched) Cont. Freq (GHz) S11 (dB) S11 (ang) S21 (dB) S21 (ang) S12 (dB) S12 (ang) S22 (dB) S22 (ang) 5.0 -6.46 84.78 0.01 91.18 -0.24 150.52 -57.02 31.45 5.1 -6.73 78.15 -0.92 64.62 -0.40 147.89 -59.25 12.01 5.2 -6.87 75.34 -3.06 26.21 -0.67 149.19 -59.19 -1.47 5.3 -6.97 73.43 -8.98 10.15 -0.27 149.16 -61.61 -8.22 5.4 -7.01 71.86 -12.49 8.76 -0.13 147.46 -63.56 33.91 5.5 -7.02 70.64 -15.48 9.71 -0.09 145.99 -62.32 16.46 5.6 -6.92 69.17 -15.79 16.32 -0.06 144.68 -64.11 23.62 5.7 -6.95 67.36 -16.37 1.87 -0.06 143.65 -60.01 26.24 5.8 -7.00 66.22 -18.23 -9.42 -0.05 142.77 -64.55 26.16 5.9 -7.02 65.33 -20.18 -18.10 -0.05 142.10 -62.06 39.12 6.0 -7.04 64.70 -22.19 -25.92 -0.05 141.39 -64.07 20.28 7.0 -7.02 67.98 -25.42 -139.56 -0.71 133.74 -60.95 18.91 8.0 -7.10 74.86 -29.95 64.65 -0.08 136.09 -59.44 31.23 9.0 -7.35 64.12 -30.03 14.20 -0.18 123.59 -57.11 12.30 10.0 -6.24 33.51 -32.37 -65.33 -0.29 100.34 -56.33 -22.67 11.0 -4.45 6.37 -49.16 -55.29 -0.20 85.95 -55.76 -29.37 12.0 -3.45 -1.48 -49.07 -34.30 -0.23 81.24 -57.11 -42.33 13.0 -3.45 9.38 -41.39 -24.76 -0.46 69.86 -53.63 -41.20 14.0 -4.03 18.70 -37.15 -67.28 -0.73 42.96 -52.80 -55.23 15.0 -4.82 -2.73 -35.90 -113.87 -0.92 12.09 -49.03 -74.36 16.0 -3.40 -50.29 -38.66 -156.16 -1.00 -4.11 -50.08 -90.29 17.0 -1.90 -72.72 -42.82 -178.79 -0.80 -16.68 -49.14 -91.89 18.0 -0.81 -71.96 -41.39 174.87 -0.91 -30.32 -46.04 -120.41 19.0 -0.93 -71.17 -40.04 149.88 -1.23 -51.45 -44.49 -140.30 20.0 -3.72 -130.45 -34.88 83.86 -1.11 -81.36 -42.00 165.62 Note: 1. S-parameter is measured with de-embedded reference plane at DUT RFin and RFout pins. 10 Test system setup MXA Signal Analyzer Power Meter Power Sensor Event 1 Coupler Signal Generator IEEE 802.11n 20 MHz (MCS 7) Signal MGA-43024 Cavity Isolator Filter Ext Trig 1 Power Sensor Attenuator Coupler Attenuator Power Supply Small-signal performance for Cavity Filter 5 0 -5 S11, S22, S21 (dB) -10 -15 -20 -25 -30 -35 S(1,1) -40 S(2,2) -45 S(2,1) -50 -55 2.30 2.32 2.34 2.36 2.38 2.40 2.42 2.44 2.46 2.48 2.50 2.52 2.54 2.56 2.58 2.60 Frequency (GHz) freq S(1,1) S(2,1) S(2,2) S(1,2) GHz dB ang dB ang dB ang dB ang 2.390 -0.58 -175.75 -36.69 -65.14 -0.51 -160.17 -36.71 -65.23 2.412 -27.89 -33.65 -0.47 64.22 -28.34 -29.88 -0.47 64.23 2.442 -51.25 159.37 -0.38 -160.42 -41.16 46.82 -0.38 -160.46 2.462 -27.81 -116.14 -0.48 41.94 -26.75 15.58 -0.48 41.97 2.483 -0.49 170.59 -25.27 86.43 -0.45 170.12 -25.33 86.26 A cavity filter is used at the input of the DUT to ensure that a clean signal from the signal generator is presented to the DUT. 11 Demonstration Board Top View Vdd1S Vdd2 Vdd2S Vdd3 Vdd1 (sense) (force) (sense) (force) Vdd3S +5V (sense) (force) +5V +5V +5V +5V +5V Vc1=2.0 V VddBias +5V Vc2=2.2 V Vc3=2.0 V Component Value Part Number Manufacturer Size C1, C2, C18, C20, C22 7.5 pF GJM1555C1H7R5BB01D Murata 0402 C3, C7, C13, C25 0.1 µF GRM155R71C104KA88D Murata 0402 C4, C8 8.2 pF GRM1555C1H8R2DZ01E Murata 0402 C10 2.2 µF GRM21BR71E225KA73L Murata 0805 C24 6.0 pF GJM1555C1H6R0CB01D Murata 0402 C26 22 nF CM05X7R223K16AHF AVX 0402 R1 0Ω RMC1/10 JPTP Kamaya 0805 R2, R3, R4, R5 0Ω RMC1/16S JPTH Kamaya 0402 Vdet (Output) Vdd1S Vdd2 Vdd2S Vdd3 Vdd1 (sense) (force) (sense) (force) Vdd3S +5V (sense) (force) +5V +5V +5V +5V +5V Application board pin header assignments Pin 1 : Vdd3 (Sense) Pin 2 : Vdd3 (Force) Pin 3 : Vdd2 (Sense) Pin 4 : Vdd2 (Force) Pin 5 : Vdd1 (Sense) Pin 6 : Vdd1 (Force) Pin 13 : Vc1 Pin 14 : Vc2 Pin 15 : Vc3 Pin 16 : VddBias (Force) Pin 17 : Vdet All other pins are grounded Pins pointing out of the page (unit is on top) Vc1=2.0 V VddBias +5V Vc2=2.2 V Vc3=2.0 V Figure 28. Demonstration board application circuit for MGA-43024 module 12 Vdet (Output) Application Schematic Vdd1 Idq1 Vdd2 Vdd3 Idq3 C7 Idq2 C8 Z = 50 Ω E = 7.0 deg F = 2.442 GHz C3 C4 C10 Z = 50 Ω E = 8.3 deg F = 2.442 GHz Z = 50 Ω E = 8.3 deg F = 2.442 GHz C13 1 RFin C1 C2 Top View Z = 50 Ω F = 2.442 GHz C18 C20 Vc1 Vc2 Z = 50 Ω F = 2.442 GHz C24 I_Vddbias C25 C22 Vc3 RFout Vddbias C26 Vdet Figure 29. Application circuit in demonstration board Notes: 1. All capacitors on supply lines are bypass capacitors. 2. C1/C2 are RF coupling capacitors. 3. For Vdd = VddBias = 5.0 V, Idq1 = 50 mA, Idq2 = 150 mA, Idq3 = 248 mA, I_VddBias = 12 mA. These currents enable optimum bias conditions to be achieved for best linearity for 802.11n signal. 13 PCB Land Pattern and Stencil Outline 4.77 5.00 3.60 0.23 0.50 0.45 Pin1 0.75 0.80 1.13 3.24 0.25 1.52 5.00 1.25 0.50 3.70 1.13 4.77 ∅ 0.30 0.05 0.68 0.80 0.27 0.50 SolderMask Opening 0.50 (pitch) 0.25 Stencil Opening PCB Land Pattern 5.00 3.60 3.24 0.45 SolderMask Top Metal 3.60 5.00 Notes: 1. Recommended Land Pattern and Stencil. 2. 4 mils stencil thickness recommended. 3. All dimensions are in mm. 0.05 Combination of Land Pattern and Stencil Opening 14 1.82 0.68 0.60 0.40 0.82 MCOB (5.0 x 5.0 x 0.82) mm 28-Lead Package Dimensions PIN #1 Identification 5.00 ± 0.10 0.82 ± 0.10 0.10 PIN #1 Identification CHAMFER 0.43 x 45° 5.00 0.25 0.30 0.375 AVAGO 43024 YYWW XXXX 3.74 3.60 5.00 ± 0.10 0.125 0.50 Top View Side View Notes: 1. All dimensions are in millimeters. 2. Dimensions are inclusive of plating. 3. Dimensions are exclusive of mold flash and metal burr. Part Number Ordering Information Part Number Qty Container MGA-43024-BLKG 100 Antistatic Bag MGA-43024-TR1G 1000 7” Reel 15 5.00 0.50 0.10 3.60 3.74 Bottom View 0.47 Device Orientation REEL USER FEED DIRECTION CARRIER TAPE USER FEED DIRECTION Tape Dimensions 16 COVER TAPE AVAGO 43024 YYWW XXXX AVAGO 43024 YYWW XXXX TOP VIEW AVAGO 43024 YYWW XXXX END VIEW Reel Dimensions (7” reel) 15.4 +0.0 -3.5 Flange Thickness : Min. 1.20 mm 12.4 min. 14.4 max. 178 +0.5 -0.5 50 min. Hatched Area Indicates Thru Hole FRONT VIEW Note: Dimensions are in mm. 2.5±0.5 RECYCLE SYMBOL 2.0 +0.5 -0.5 12.8 min. 13.5 max. 20.2 min. BACK VIEW 17 TOLERANCE .X = ±0.25 .XX = ±0.13 For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2014 Avago Technologies. All rights reserved. AV02-4664EN - October 8, 2014