Kemet C20ALGR6100ZASJ C44p/c20a series, 330 - 1,000 vac, 700 - 2,300 vdc, for pfc and ac filter Datasheet

Aluminum Can Power Film Capacitors
C44P/C20A Series, 330 – 1,000 VAC, 700 – 2,300 VDC,
for PFC and AC Filter
Overview
Applications
The C44P/C20A Series are a polypropylene metallized film
with cylindrical aluminium can type filled with oil, screw
terminals, plastic insulator and overpressure safety device.
Typical applications include commutation, power factor
correction and AC harmonic filtering.
Benefits
•
•
•
•
•
Overpressure safety device
High peak current capability
High torque screw terminals with plastic insulator
Long lifetime
Self-healing
Part Number System
C
44
Series
MKP
Capacitors
for Power
Applications
P
L
G
R
Application
Rated Voltage
(VAC)
Case
Type
Terminal
Style
G=
M12
bolt
R=
Male
M10
44 = 330 – AC Filter
440 VAC
P = C44
20 = 550 – A = C20
1,000 VAC
For
C44P:
L = 330
K = 440
For
C20A:
K = 550
L = 640
Q = 780
Z = 1000
6
1
0
0
Capacitance Code (pF)
Digits 9 – 11 indicate the
first 3 digits of capacitance
value. Digit 8 indicates the
number of zeros that must
be added to obtain rated
capacitance in pF.
A
Internal
Code
A=
Standard
Z=
Special
A
S
Internal
Codes
J
Tolerance
J = 5%
K = 10%
It is not possible to manufacture every part number which could be created from coding description. Please refer to table of standard part numbers and
ask KEMET for other possibilities.
One world. One KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
F3050_C44P_RADIAL • 9/20/2016
1
Power and AC Film Capacitors – Aluminum Can Power Film Capacitors
C44P/C20A Series, 250 – 1,000 VAC, 400 – 1,400 VDC, for PFC and AC Filter
Dimensions – Millimeters
Diameter
P
W
W1
M1
H1
Ø = 65
28
18
40
12
16
Ø ≥ 75
35
21
45
12
16
All dimensions are in mm
Maximum Driving Torque
Terminals M10
10 [N*m]
Bolt M12
12 [N*m]
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
F3050_C44P_RADIAL • 9/20/2016
2
Power and AC Film Capacitors – Aluminum Can Power Film Capacitors
C44P/C20A Series, 250 – 1,000 VAC, 400 – 1,400 VDC, for PFC and AC Filter
General Technical Data
Reference Standards
Dielectric
Climatic Category
Maximum hot spot temperature
Endurance Test IEC 61071
Installation
IEC 61071
UL810 approved
Polypropylene film
Non-inductive type winding
25/70/56 – IEC 60068-1
+80°C
+70°C @ Case Temperature
Whatever position
Tinned brass deck with self estinguish UL94 V0 plastic insulators
Electrical Characteristics
Rated Voltage
Urms = (see table) VAC
Surge Voltage
Us = (see table) VDC
Capacitance Tolerance
Dissipation Factor PP typical
(tgδ0)
Relative Humidity
Capacitance deviation in
temperature range (-40 +50°C)
±5% or ±10%
≤ 0.0002 at 25°C
Annual average ≤ 80% at 24°C
On 30 days/year permanently 100%. on other days occasionally
90%.
Dewing not admitted
±1.5% maximum on capacitance value at 20°C
Life Expectancy
Life Expectancy
Capacitance drop at end of life
Failure Rate IEC 61709
100,000 hours @ VRMS with THS ≤ 75°C
- 5% (typical)
See FIT Graph
Test Methods
Test voltage term to term (Utt)
1.5 x VRMS for 10 seconds at 25°C
Test voltage term to case (Utc)
3,600 V ~ 50 Hz for 10 seconds (C44P)
6,000 V ~ 50 Hz for 10 seconds (C20A)
Damp Heat
IEC 60068-2-78
Change of Temperature
IEC 60068-2-14
Vibration Strength
IEC 60068-2-6
NOTICE: Care should be taken to ensure that there still is electrical clearance of 15 mm between terminations and other live or earthed parts above the
capacitor, in case of safety device activation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
F3050_C44P_RADIAL • 9/20/2016
3
Power and AC Film Capacitors – Aluminum Can Power Film Capacitors
C44P/C20A Series, 250 – 1,000 VAC, 400 – 1,400 VDC, for PFC and AC Filter
Table 1 – Ratings & Part Number Reference
Cap
Value
(µF)
1
Vrms
Rated
Voltage
Surge
Voltage
Maximum
Dimensions
(mm)
Ripple
Current
ESR
10 kHz
(mΩ)
(nH)
(°C/W)
ESL
Thermal Res
dV/dt
(V/µs)
Part Number
VAC
VDC
VDC
D
H
10 kHz
40°C (A)1
100
200
300
300
400
500
500
600
600
100
100
120
133
133
150
200
250
300
400
22
33
47
68
100
120
150
15
22
33
47
68
100
120
150
10
15
22
33
47
68
100
15
20
22
33
47
68
330
330
330
330
330
330
330
330
330
440
440
440
440
440
440
440
440
440
440
550
550
550
550
550
550
550
640
640
640
640
640
640
640
640
780
780
780
780
780
780
780
1000
1000
1000
1000
1000
1000
700
700
700
700
700
700
700
700
700
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1280
1280
1280
1280
1280
1280
1280
1400
1400
1400
1400
1400
1400
1400
1400
1700
1700
1700
1700
1700
1700
1700
2300
2300
2300
2300
2300
2300
1050
1050
1050
1050
1050
1050
1050
1050
1050
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1900
1900
1900
1900
1900
1900
1900
2100
2100
2100
2100
2100
2100
2100
2100
2500
2500
2500
2500
2500
2500
2500
3300
3300
3300
3300
3300
3300
65
65
65
75
65
75
85
85
85
75
65
65
65
75
65
75
85
85
95
65
75
65
65
75
85
95
65
65
75
65
75
95
95
116
65
75
75
85
75
85
95
75
75
75
75
85
95
117
147
247
197
247
247
197
247
280
147
197
197
247
197
247
247
247
247
247
117
117
197
247
247
247
247
117
147
147
247
247
247
247
247
117
147
147
147
247
247
247
147
140
147
247
247
247
25
43
50
55
55
58
63
65
75
30
50
50
40
50
45
55
60
60
65
40
45
50
55
60
60
60
35
35
40
55
60
60
60
60
30
35
40
50
55
60
60
33
40
35
40
45
55
3.0
2.8
2.3
1.4
2.0
1.8
1.2
1.6
1.1
3.5
2.3
1.8
3.0
1.6
2.8
2.4
2.0
1.9
1.7
2.1
1.6
1.4
1.7
1.4
1.3
1.2
2.5
3.0
2.2
1.9
1.6
1.3
1.3
1.2
3.0
3.6
2.7
2.0
1.8
1.5
1.3
2.5
2.1
2.0
1.7
1.4
1.2
115
140
150
160
160
170
160
180
210
145
135
165
155
170
160
175
175
180
200
125
130
135
145
160
165
180
120
125
135
145
160
170
175
180
130
135
140
150
160
170
180
150
150
155
165
170
180
8.5
5.4
3.6
4.2
3.1
2.9
3.4
2.9
2.4
5.6
4.4
4.2
3.7
4.0
3.5
3.2
3.4
2.7
2.5
13.3
10.6
7.8
6.2
5.2
4.6
4.4
14.1
10.9
9.1
6.3
5.3
4.4
4.1
3.8
14.1
10.1
8.9
7.6
5.2
4.5
4.0
9.2
8.3
8.0
5.3
4.7
4.1
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
20
20
20
20
20
20
20
20
20
20
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
70
70
70
70
70
70
70
85
85
85
85
85
85
C44PLGR6100AASJ
C44PLGR6200ZASJ
C44PLGR6300ZASJ
C44PLGR6300AASJ
C44PLGR6400ZASJ
C44PLGR6500ZASJ
C44PLGR6500ZBSJ
C44PLGR6600AASJ
C44PLGR6600ZASJ
C44PKGR6100AASJ
C44PKGR6100ZASJ
C44PKGR6120AASJ
C44PKGR6133AASJ
C44PKGR6133ZASJ
C44PKGR6150AASJ
C44PKGR6200AASJ
C44PKGR6250AASJ
C44PKGR6300AASJ
C44PKGR6400AASK
C20AKGR5220AASK
C20AKGR5330AASK
C20AKGR5470AASK
C20AKGR5680AASK
C20AKGR6100AASK
C20AKGR6120AASK
C20AKGR6150AASK
C20ALGR5150AASK
C20ALGR5220AASK
C20ALGR5330AASK
C20ALGR5470AASK
C20ALGR5680AASK
C20ALGR6100AASK
C20ALGR6120AASK
C20ALGR6150AASK
C20AQGR5100AASK
C20AQGR5150AASK
C20AQGR5220AASK
C20AQGR5330AASK
C20AQGR5470AASK
C20AQGR5680AASK
C20AQGR6100AASK
C20AZGR5150AASK
C20AZGR5200ZBSK
C20AZGR5220AASK
C20AZGR5330AASK
C20AZGR5470AASK
C20AZGR5680AASK
Cap
Value
VAC
Rated
Voltage
Surge
Voltage
D
H
Ripple
Current
ESR
ESL
Thermal Res
dV/dt
(V/µs)
Part Number
Maximum admissible RMS current THS ≤ 75°C.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
F3050_C44P_RADIAL • 9/20/2016
4
Power and AC Film Capacitors – Aluminum Can Power Film Capacitors
C44P/C20A Series, 250 – 1,000 VAC, 400 – 1,400 VDC, for PFC and AC Filter
Lifetime Expectancy/Failure Quota Graphs
Hot Spot
Temperature °C
Lifetime curve C44P-C20 series
Voltage Ratio V/VRMS
1.40
1.30
≤60°C
1.20
70°C
1.10
1.00
At each frequency, the Power Losses are the sum of:
1. Dielectric Power Losses
PD(fi) = 2 * π * fi* C * V(fi)2* tgδ0
which can be alternatively calculated as
PD(fi) =
75°C
0.90
0.80
80°C
0.70
0.60
Power Losses and Hot Spot Temperature Calculation
100
1,000
10,000
100,000
I(fi)2
2 * π * fi* C
* tgδ0
where: tgδ0 = 2 * 10-4
2. Joule Power Losses:
PJ(fi) = Rs * I(fi)2
1,000,000
Lifetime Expectancy [h]
The Total Power Losses are the sum of the components at each frequency:
PT = ∑ [PD ( f i ) + PJ ( f i )]
i
The Thermal Jump in the Hot Spot is:
ΔTHS = PT * Rth-hs
V = Operating Voltage [VAC]
Vrms = Rated Voltage [VAC]
The Hot Spot Temperature is:
THS = Ta + ΔTHS
FIT @ Hot Spot Temperatures
80
75
70
≤60
Hot Spot
Temperature °C
Limits for the formulas
The limits listed below should not be exceeded:
1.
1,000
∑V( f )
2
≤ VRMS
∑ I( f )
2
≤ I RMS
i
2.
100
FIT
i
i
THS = Ta + ΔTHS ≤ (THS )MAX
10
1
i
0.6
0.7
0.8
0.9
1
Voltage Ratio V/Vrms
Example of calculation
Part Number: C44PKGR6100AASJ
Rated VRMS = 440 [VRMS]
Rated IRMS = 30 [A]
Rs = 3.5 [mΩ]
Rth = 5.6 [°C/W]
Fundamental Frequency F1 = 50 [Hz]
Ripple Frequency F2 = 7000 [Hz]
Fundamental Voltage V1 = 440 [V~]
Ripple Current I2 = 27 [A]
Ta = 35°C
I1 = I(50) = 2 * π * 50 * 100 * 10-6 * 440 = 13.8 [A]
V2 = V(7000) = [27/(2 * π * 7000 * 100 * 10-6)] = 6.14 [V]
1.1
Where Ta is the ambient temperature (steady state temperature of the
cooling air flowing around the capacitor, measured at 100 mm of distance
from the capacitor and at a height of 2/3 height of the capacitor).
3. Maximum case temperature (TCASE) ≤ 70°C
IRMS = √(13.82 + 27 2) = 30 ≤ 30 → Admitted
VRMS = √(4402 + 6.12) = 440 ≤ 440 → Admitted
PD(50) = 2 * π * 50 * 100 * 10-6 * 4402 * 2 * 10-4 = 1.22 [W]
PD(7000) = [272 /(2 * π * 7000 * 100 * 10-6)] * 2 * 10-4 = 0.03 [W]
PJ(50) = 3.5 * 10-3 * [(2 *π * 50 * 100 * 10-6 * 440)2] = 0.67 [W]
PJ(7000) = 3.5 * 10-3 * 27 2 = 2.55 [W]
PT = 1.22 + 0.03 + 0.67 + 2.55 = 4.47 [W]
ΔTHS = 5.6 * 4.47 = 25 [°C]
THS = Ta + ΔTHS
THS = 35 + 25 = 60 [°C] →OK since hot spot temperature is less
than maximum admitted
Expected Life @ THS = 75°C → 100,000 hours (see lifetime curve)
Expected Life @ THS = 60°C → 140,000 hours (see lifetime curve)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
F3050_C44P_RADIAL • 9/20/2016
5
Power and AC Film Capacitors – Aluminum Can Power Film Capacitors
C44P/C20A Series, 250 – 1,000 VAC, 400 – 1,400 VDC, for PFC and AC Filter
Marking
Dissipation Factor
Dissipation factor is a complex function involved with the inefficiency of the capacitor. The tgδ may change up and down
with increased temperature. For more information, please refer to Performance Characteristics.
Sealing
Hermetically Sealed Capacitors
When the temperature increases, the pressure inside the capacitor increases. If the internal pressure is high enough, it can
cause a breach in the capacitor which can result in leakage, impregnation, filling fluid or moisture susceptibility.
Resin Encased/Wrap & Fill Capacitors
The resin seals on resin encased and wrap and fill capacitors will withstand short-term exposure to high humidity
environments without degradation. Resins and plastic tapes will form a pseudo-impervious barrier to humidity and
chemicals. These case materials are somewhat porous and through osmosis can cause contaminants to enter the capacitor.
The second area of contaminated absorption is the lead-wire/resin interface. Since resins cannot bond 100% to tinned wires,
there can be a path formed up to the lead wire into the capacitor section. Aqueous cleaning of circuit boards can aggravate
this condition.
Barometric Pressure
The altitude at which hermetically sealed capacitors are operated controls the voltage rating of the capacitor. As the
barometric pressure decreases, the susceptibility to terminal arc-over increases. Non-hermetic capacitors can be affected
by internal stresses due to pressure changes. This can be in the form of capacitance changes or dielectric arc-over as well
as low insulation resistance. Heat transfer can also be affected by altitude operation. Heat generated in operation cannot be
dissipated properly and can result in high RI2 losses and eventual failure.
Radiation
Radiation capabilities of capacitors must be taken into consideration. Electrical degradation in the form of dielectric
embitterment can take place causing shorts or opens.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
F3050_C44P_RADIAL • 9/20/2016
6
Power and AC Film Capacitors – Aluminum Can Power Film Capacitors
C44P/C20A Series, 250 – 1,000 VAC, 400 – 1,400 VDC, for PFC and AC Filter
Environmental Compliance
As an environmentally conscious company, KEMET is working continuously with improvements concerning the environmental
effects of both our capacitors and their production.
In Europe (RoHS Directive) and in some other geographical areas like China, legislation has been put in place to prevent the
use of some hazardous materials, like Lead (Pb), in electronic equipment. All products in this catalog are produced to help
our customers' obligations to guarantee their products to fulfill these legislative requirements. The only material of concern
in our products has been Lead (Pb), which has been removed from all designs to fulfill the requirement of containing less
than 0.1% of Lead in any homogeneous material.
KEMET will closely follow any changes in legislation world wide and makes any necessary changes in its products, whenever
needed.
Some customer segments like Medical, Military and Automotive Electronics may still require the use of Lead in electrode
coatings. To clarify the situation and distinguish products from each other, a special symbol is used on the packaging labels
for RoHS compatible capacitors.
Because of customer requirements there may appear additional markings like LF = Lead Free or LFW = Lead Free Wires on
the label.
All KEMET power film products are RoHS Compliant.
Materials & Environment
The selection of materials used by KEMET for the production of capacitors is the result of extensive experience and
constant attention to environmental protection. KEMET selects its suppliers according to ISO 9001 standards and carries out
statistical analysis on the materials purchased before acceptance. All materials are, to the company's present knowledge,
non-toxic and free from Cadmium, Mercury, Chrome and compounds, PCB (Polychlorine Triphenyl), Bromide and Chlorine
Dioxins Bromurate Clorurate, CFC and HCFC and Asbestos.
Green Products
All KEMET power film products are ROHS Compliant.
Insulation Resistance
When the capacitor temperature increases, the insulation resistance decreases. This is due to increased electron activity.
Low insulation resistance can also be the result of moisture trapped in the windings, caused by a prolonged exposure to
excessive humidity.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
F3050_C44P_RADIAL • 9/20/2016
7
Power and AC Film Capacitors – Aluminum Can Power Film Capacitors
C44P/C20A Series, 250 – 1,000 VAC, 400 – 1,400 VDC, for PFC and AC Filter
KEMET Electronic Corporation Sales Offices
For a complete list of our global sales offices, please visit www.kemet.com/sales.
Disclaimer
All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for
checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.
All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such
applications, but are not intended to constitute – and KEMET specifically disclaims – any warranty concerning suitability for a specific customer application or use.
The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no
obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component
failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards
(such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or
property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other
measures may not be required.
Prototype Sample Disclaimer
The Customer acknowledges the following limitations of the prototype samples:
(1) Prototype samples are manufactured from preliminary designs and manufacturing processes; may not represent final designs; have not been
released for commercial use and are not subject to the same quality control procedures applicable to released products.
(2) Prototype samples are not qualified parts and are provided “as-is” by KEMET Electronics Corporation, which specifically disclaims any and all
warranties and guarantees, explicit or implied, including, without limitation, the warranties of merchantability and fitness for a particular purpose or use.
(3) Prototype samples are not intended for commercial use; are provided for engineering evaluation only and are not recommended for use in the
Customer’s production line.
(4) The Customer assumes the risk ofany and alluses that the Customer makes of the prototype samples.
General Disclaimer
“All product specifications, statements, information and data given herein are believed to be accurate and reliable, but are presented without guarantee,
warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on our knowledge of typical
operating conditions for such applications, but are not intended to constitute – and we specifically disclaim – any warranty concerning suitability for
a specific customer application or use. This Information is intended for use only by customers who have the requisite experience and capability to
determine the correct products for their application.
KEMET’s product warranty is set forth at www.kemet.com under Terms and Conditions of Sale.”
KEMET is a registered trademark of KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
F3050_C44P_RADIAL • 9/20/2016
8
Similar pages